iEarth5-049.in: FFRIC 0.1, TAUMAX 2.0E12, ICONVE6#3, type-4A slabs; no internal VBCs
0.10       FAULT     FRICTION COEFFICIENT     <*********** !
0.85       CONTINUUM FRICTION COEFFICIENT
1.00       BIOT COEFFICIENT (EFFICACY OF PORE PRESSURE)
0.00       BYERLY (0.-.99); FRACTIONAL STRENGTH REDUCTION OF MASTER FAULT
2.3E9,9.5E4  ACREEP (SHEAR STRESS COEFFICIENT OF CREEP LAW) <**** !
4000.,18314. BCREEP (ACTIVATION ENERGY/N/GAS-CONSTANT) (IN KELVIN) <** !
   0.,0.0171 CCREEP (DERIVITIVE OF BCREEP WITH RESPECT TO DEPTH; CRUST/MANTLE)
 5.E8,5.E8   DCREEP (MAXIMUM SHEAR STRESS; CRUST/MANTLE)
0.333333   ECREEP (EXPONENT ON STRAIN-RATE IN CREEP-STRESS LAWS)=(1/N)
1412.      6.1E-4 INTERCEPT AND SLOPE OF UPPER MANTLE ADIABAT (K, K/M)
400.E3     ZBASTH: DEPTH OF BASE OF ASTHENOSPHERE
AF         AFRICAN PLATE REFERENCE FRAME
 6  1.00   ICONVE:0=NONE;1=HAGER;2=BAUMGARDNER;3=PB2002;4=CONTINENTAL PB2002;5=forearc;6=inferred
20.E6      TRHMAX (LIMIT ON BASAL TRACTION)
2.0E+12    TAUMAX (DOWN-DIP INTEGRAL OF SUBDUCTION ZONE TRACTION; OCEAN\LAND)
1032.      RHOH2O (DENSITY OF WATER, AT P=0 AND T=SURFACE TEMPERATURE)
2889.,3332. RHOBAR (MEAN DENSITY AT P=0 AND T=0; CRUST/MANTLE)
3125.      RHOAST (DENSITY OF ASTHENOSPHERE, AT P=0 AND AMBIENT T)
9.8        GRAVITATIONAL ACCELERATION
1000.      ONE KILOMETER, EXPRESSED IN CURRENT LENGTH UNITS
6371000.   RADIUS OF THE PLANET
2.4E-5,3.94E-5 VOLUMETRIC THERMAL EXPANSION COEFFICIENT; CRUST/MANTLE
2.7,3.20   THERMAL CONDUCTIVITY; CRUST/MANTLE
3.5E-7,3.2E-8 RADIOACTIVE HEAT PRODUCTION, ON VOLUME (NOT MASS) BASIS
273.       SURFACE TEMPERATURE, IN KELVIN
1223.,1673. UPPER TEMPERATURE LIMITS, IN KELVIN; CRUST/MANTLE-LITHOSPHERE
50         MAXIMUM NUMBER OF ITERATIONS
0.0001     ACCEPTABLE CONVERGENCE LEVEL (FRACTIONAL VELOCITY CHANGE)
 50.E6     REFERENCE LEVEL OF SHEAR STRESS
1.00E-11   ACCEPTABLE LEVEL OF VELOCITY ERRORS (1 MM/A = 3.17E-11 M/S)
F          OUTPUT NODE VELOCITIES EVERY ITERATION? (FOR CONVERGENCE STUDIES)
===== POST-PROCESSING PLOT CONTROL PARAMETERS (NOT USED BY SHELLS) =====
       999 PLOTFILE # ON INPUT DATASET (OR 999 FOR LAST, OR 0 FOR ALL)
         F --------------------- PLOT GRID OF ELEMENTS
         F     1000.    -2000.+1 PLOT ELEVATIONS
         F    10.E-3    80.E-3+1 PLOT HEAT-FLOW
         F     5.E+3          +1 PLOT CRUSTAL THICKNESS
         F    20.E+3    80.E+3-1 PLOT TOTAL LITHOSPHERE THICKNESS
         F                    +1 PLOT TEMPERATURE OF MOHO
         F                    +1 PLOT TEMPERATURE OF BASE OF PLATE
         F                    +1 PLOT NONLITHOSTATIC PRESSURE ANOMALY AT BASE
         F                    +1 PLOT VELOCITY VECTORS BELOW PLATE
         F                    +1 PLOT SHEAR TRACTION ON BASE OF PLATE
         F                    +1 PLOT SURFACE VELOCITY VECTORS
         F                    +1 PLOT VELOCITY CHANGES SINCE LAST TIME
         F                    +1 PLOT GREATEST PRIN. STRAIN RATE
         F --------------------- PLOT HORIZONTAL-VELOCITY DISCONTINUITY
         F --------------------- PLOT SLIP-RATE OF FAULTS
         F 3.169E-10   1.0E-15+1 PLOT CRUSTAL THICKENING RATE
         F                    +1 PLOT VERTICAL INTEGRAL OF STRESS ANOMALY
         T --------------------- PLOT MOST COMPRESSIVE STRESS AXES
         F --------------------- PLOT NET EXTERNAL FORCE ON NODES
         F    1.00             1 PLOT Log10[Viscosity Integral]&LIMITS(1 or 2)
        10 APPROXIMATE NUMBER OF CONTOURS IN EACH PLOT (FOR DEFAULT)
         1 COASTLINES? (0=NONE, 1=PRESENT, 2=USER DATA)
      12.  RMS LENGTH OF VECTORS AND SYMBOLS, IN DEGREES (12. OR 4.)
 360.      WIDTH OF MAP, IN DEGREES (.LE.360.), E.G., 360. OR 60.
  180.,    0.    (LON,LAT) OF PLOT CENTER
         1 PEN WEIGHT FOR LIGHT LINES
         2 PEN WEIGHT FOR MEDIUM LINES
         3 PEN WEIGHT FOR HEAVY LINES
         F COLOR? (F GIVES BLACK-AND-WHITE)