Earth5R.feg: = Earth5Q.feg, with reduced Q=0.054 in India, increased Q=0.050 in Earth5R-type4A.bcs: forced slabs(4), w/ exceptions (A); no plate-interior VBCs iEarth5-049.in: FFRIC 0.1, TAUMAX 2.0E12, ICONVE6#3, type-4A slabs; no internal Torque-balance reports for each of 52 plates (FFRIC 0.100, TAUMAX 2.0E+12\2.0E+12): Plate # 1 =AF: 1288 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 4.79E+25 -2.79E+25 6.44E+25 8.499E+25 -30.27 49.29 Velocity-Boundary-C.'s -1.10E+25 -5.45E+24 6.25E+24 1.377E+25 -153.63 27.01 ------------------------------------------------------------------------------------- Basal-Strength: 3.69E+25 -3.34E+25 7.07E+25 8.643E+25 -42.16 54.86 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.22E+25 7.05E+25 1.97E+25 7.647E+25 107.47 14.94 Continuum-Link [PLUG]: -3.77E+25 -3.43E+25 -6.80E+25 8.499E+25 -137.70 -53.11 ------------------------------------------------------------------------------------- Side-Strength: -5.99E+25 3.61E+25 -4.83E+25 8.501E+25 148.90 -34.59 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.30E+25 -2.75E+24 -2.24E+25 3.227E+25 -6.81 -44.01 Side-Strength: -5.99E+25 3.61E+25 -4.83E+25 8.501E+25 148.90 -34.59 Basal-Strength: 3.69E+25 -3.34E+25 7.07E+25 8.643E+25 -42.16 54.86 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.81E+05 -9.31E+04 2.34E+05 4.564E+05 -13.74 30.81 Suggested viewpoint for orthographic projection of torques on this plate is: ( 68.99E, 14.25N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.08E+18 -2.11E+18 3.42E+18 5.065E+18 314.2 Side-strength: 8.25E+18 -3.17E+17 -1.05E+19 1.334E+19 215.9 Basal-strength: -1.13E+19 2.43E+18 7.06E+18 1.357E+19 57.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 2.86E, 0.60N). ====================================================================================== Plate # 2 =AM: 134 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.18E+25 -4.60E+25 1.19E+25 4.899E+25 -104.42 14.03 Velocity-Boundary-C.'s -1.33E+20 -1.37E+20 6.08E+19 2.006E+20 -134.23 17.64 ------------------------------------------------------------------------------------- Basal-Strength: -1.18E+25 -4.60E+25 1.19E+25 4.899E+25 -104.42 14.03 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.25E+25 7.24E+25 -2.69E+25 8.378E+25 65.85 -18.75 Continuum-Link [PLUG]: -1.46E+25 -1.30E+25 7.45E+24 2.094E+25 -138.40 20.85 ------------------------------------------------------------------------------------- Side-Strength: 1.78E+25 5.94E+25 -1.95E+25 6.500E+25 73.30 -17.43 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -5.98E+24 -1.34E+25 7.60E+24 1.650E+25 -114.11 27.41 Side-Strength: 1.78E+25 5.94E+25 -1.95E+25 6.500E+25 73.30 -17.43 Basal-Strength: -1.18E+25 -4.60E+25 1.19E+25 4.899E+25 -104.42 14.03 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 6.86E+06 -1.13E+07 -1.25E+07 1.817E+07 -58.74 -43.30 Suggested viewpoint for orthographic projection of torques on this plate is: ( 174.36E,-31.42N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 9.94E+17 -1.50E+18 -1.86E+18 2.590E+18 147.4 Side-strength: -4.60E+18 4.05E+18 8.15E+18 1.020E+19 339.5 Basal-strength: 3.61E+18 -2.55E+18 -6.29E+18 7.689E+18 163.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 127.74E, 46.43N). ====================================================================================== Plate # 3 =AN: 1264 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.50E+25 -6.54E+24 3.13E+25 3.533E+25 -23.54 62.37 Velocity-Boundary-C.'s -6.09E+24 -5.66E+24 1.19E+24 8.397E+24 -137.13 8.14 ------------------------------------------------------------------------------------- Basal-Strength: 8.93E+24 -1.22E+25 3.25E+25 3.584E+25 -53.80 65.05 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.81E+24 5.24E+25 -2.94E+25 6.059E+25 98.47 -28.99 Continuum-Link [PLUG]: -1.35E+18 -1.21E+18 -2.96E+18 3.467E+18 -138.19 -58.51 ------------------------------------------------------------------------------------- Side-Strength: -7.81E+24 5.24E+25 -2.94E+25 6.059E+25 98.47 -28.99 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.12E+24 -4.02E+25 -3.13E+24 4.036E+25 -91.59 -4.44 Side-Strength: -7.81E+24 5.24E+25 -2.94E+25 6.059E+25 98.47 -28.99 Basal-Strength: 8.93E+24 -1.22E+25 3.25E+25 3.584E+25 -53.80 65.05 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 9.33E+03 -6.46E+04 3.59E+05 3.644E+05 -81.78 79.69 Suggested viewpoint for orthographic projection of torques on this plate is: ( -0.36E,-15.49N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.68E+18 -5.20E+17 6.09E+18 6.335E+18 355.4 Side-strength: -2.23E+18 -4.77E+18 -7.92E+18 9.511E+18 210.2 Basal-strength: 5.42E+17 5.29E+18 1.84E+18 5.625E+18 70.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 57.74E, -83.98N). ====================================================================================== Plate # 4 =AP: 85 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.65E+25 -1.99E+25 1.92E+25 3.833E+25 -143.10 30.14 Velocity-Boundary-C.'s -2.81E+21 -6.55E+20 -7.13E+20 2.968E+21 -166.86 -13.90 ------------------------------------------------------------------------------------- Basal-Strength: -2.65E+25 -1.99E+25 1.92E+25 3.833E+25 -143.10 30.14 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 9.60E+24 4.54E+24 1.46E+24 1.072E+25 25.33 7.85 Continuum-Link [PLUG]: 7.58E+23 6.18E+24 -9.80E+24 1.161E+25 83.00 -57.56 ------------------------------------------------------------------------------------- Side-Strength: 1.04E+25 1.07E+25 -8.33E+24 1.708E+25 45.99 -29.20 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.62E+25 9.18E+24 -1.09E+25 2.155E+25 29.61 -30.44 Side-Strength: 1.04E+25 1.07E+25 -8.33E+24 1.708E+25 45.99 -29.20 Basal-Strength: -2.65E+25 -1.99E+25 1.92E+25 3.833E+25 -143.10 30.14 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.36E+07 -1.60E+08 -4.83E+07 1.753E+08 -71.46 -15.98 Suggested viewpoint for orthographic projection of torques on this plate is: (-152.09E,-59.55N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.65E+18 2.95E+18 4.38E+16 3.382E+18 271.5 Side-strength: -1.76E+18 1.99E+18 3.68E+17 2.681E+18 285.7 Basal-strength: 3.41E+18 -4.94E+18 -4.12E+17 6.016E+18 97.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -70.13E, -17.84N). ====================================================================================== Plate # 5 =AR: 188 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 6.61E+25 -8.43E+25 3.64E+25 1.132E+26 -51.93 18.78 Velocity-Boundary-C.'s -4.87E+19 7.82E+19 -4.13E+19 1.010E+20 121.93 -24.17 ------------------------------------------------------------------------------------- Basal-Strength: 6.61E+25 -8.43E+25 3.64E+25 1.132E+26 -51.93 18.78 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -4.95E+25 7.24E+25 -4.70E+25 9.945E+25 124.34 -28.17 Continuum-Link [PLUG]: -1.32E+25 1.37E+25 -4.63E+24 1.960E+25 133.97 -13.68 ------------------------------------------------------------------------------------- Side-Strength: -6.27E+25 8.61E+25 -5.16E+25 1.183E+26 126.06 -25.85 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.39E+24 -1.76E+24 1.52E+25 1.563E+25 -152.54 75.86 Side-Strength: -6.27E+25 8.61E+25 -5.16E+25 1.183E+26 126.06 -25.85 Basal-Strength: 6.61E+25 -8.43E+25 3.64E+25 1.132E+26 -51.93 18.78 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.45E+06 -3.47E+06 7.50E+05 3.833E+06 -67.33 11.28 Suggested viewpoint for orthographic projection of torques on this plate is: ( 42.81E, 13.65N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.64E+18 1.82E+18 -1.54E+17 2.453E+18 93.7 Side-strength: 8.54E+18 -3.45E+18 -1.61E+19 1.857E+19 206.7 Basal-strength: -6.90E+18 1.63E+18 1.63E+19 1.776E+19 19.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 47.56E, 26.35N). ====================================================================================== Plate # 6 =AS: 415 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.81E+23 1.63E+25 -9.20E+24 1.873E+25 89.36 -29.42 Velocity-Boundary-C.'s -1.88E+19 -9.07E+19 8.09E+19 1.230E+20 -101.69 41.14 ------------------------------------------------------------------------------------- Basal-Strength: 1.81E+23 1.63E+25 -9.20E+24 1.873E+25 89.36 -29.42 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.90E+24 -1.47E+25 3.28E+24 1.560E+25 -75.17 12.15 Continuum-Link [PLUG]: -3.06E+24 -8.04E+24 8.32E+24 1.196E+25 -110.85 44.03 ------------------------------------------------------------------------------------- Side-Strength: 8.43E+23 -2.28E+25 1.16E+25 2.558E+25 -87.88 26.97 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.02E+24 6.47E+24 -2.40E+24 6.974E+24 99.00 -20.11 Side-Strength: 8.43E+23 -2.28E+25 1.16E+25 2.558E+25 -87.88 26.97 Basal-Strength: 1.81E+23 1.63E+25 -9.20E+24 1.873E+25 89.36 -29.42 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.95E+07 2.72E+07 2.76E+07 5.528E+07 34.59 29.90 Suggested viewpoint for orthographic projection of torques on this plate is: ( 25.80E, 38.29N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.58E+17 -1.66E+17 -7.72E+17 1.095E+18 206.0 Side-strength: -2.84E+18 1.20E+18 2.57E+18 4.015E+18 35.3 Basal-strength: 2.08E+18 -1.04E+18 -1.80E+18 2.940E+18 218.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 25.46E, 36.81N). ====================================================================================== Plate # 7 =AT: 192 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.90E+25 -6.22E+24 -1.57E+25 2.540E+25 -18.13 -38.17 Velocity-Boundary-C.'s 1.10E+20 1.69E+19 -1.42E+20 1.807E+20 8.74 -51.92 ------------------------------------------------------------------------------------- Basal-Strength: 1.90E+25 -6.22E+24 -1.57E+25 2.541E+25 -18.13 -38.17 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.82E+25 -9.45E+24 2.74E+25 3.421E+25 -152.61 53.11 Continuum-Link [PLUG]: 5.76E+24 2.39E+24 -8.99E+24 1.094E+25 22.57 -55.26 ------------------------------------------------------------------------------------- Side-Strength: -1.25E+25 -7.05E+24 1.84E+25 2.330E+25 -150.52 52.04 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -6.51E+24 1.33E+25 -2.67E+24 1.502E+25 116.12 -10.24 Side-Strength: -1.25E+25 -7.05E+24 1.84E+25 2.330E+25 -150.52 52.04 Basal-Strength: 1.90E+25 -6.22E+24 -1.57E+25 2.541E+25 -18.13 -38.17 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.34E+07 3.53E+06 3.24E+06 1.420E+07 14.78 13.18 Suggested viewpoint for orthographic projection of torques on this plate is: ( 34.19E, 37.86N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.46E+18 3.53E+17 -1.81E+18 2.357E+18 193.0 Side-strength: -1.96E+18 3.08E+18 -1.46E+17 3.657E+18 92.9 Basal-strength: 4.95E+17 -3.44E+18 1.96E+18 3.988E+18 308.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 29.37E, 38.78N). ====================================================================================== Plate # 8 =AU: 999 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s 1.56E+26 -6.45E+24 3.39E+25 1.599E+26 -2.37 12.23 ------------------------------------------------------------------------------------- Basal-Strength: 1.56E+26 -6.45E+24 3.39E+25 1.599E+26 -2.37 12.23 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.79E+24 -2.89E+25 -1.43E+26 1.463E+26 -101.32 -78.37 Continuum-Link [PLUG]: -2.01E+26 2.40E+24 1.05E+26 2.266E+26 179.31 27.53 ------------------------------------------------------------------------------------- Side-Strength: -2.07E+26 -2.65E+25 -3.86E+25 2.119E+26 -172.68 -10.50 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.06E+25 3.30E+25 4.75E+24 6.055E+25 33.12 4.50 Side-Strength: -2.07E+26 -2.65E+25 -3.86E+25 2.119E+26 -172.68 -10.50 Basal-Strength: 1.56E+26 -6.45E+24 3.39E+25 1.599E+26 -2.37 12.23 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.15E+06 -7.83E+05 6.95E+05 1.559E+06 -34.16 26.49 Suggested viewpoint for orthographic projection of torques on this plate is: ( -40.20E,-74.66N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -4.87E+18 7.80E+18 -2.40E+18 9.504E+18 162.7 Side-strength: 2.98E+18 -3.25E+19 6.38E+18 3.327E+19 316.5 Basal-strength: 1.88E+18 2.47E+19 -3.98E+18 2.510E+19 126.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 122.75E, -30.59N). ====================================================================================== Plate # 9 =BH: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.73E+25 1.36E+25 -4.51E+25 5.020E+25 38.21 -63.97 Velocity-Boundary-C.'s 2.14E+24 2.04E+24 4.19E+24 5.128E+24 43.50 54.79 ------------------------------------------------------------------------------------- Basal-Strength: 1.95E+25 1.57E+25 -4.09E+25 4.794E+25 38.84 -58.60 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.05E+25 -1.61E+25 4.17E+25 4.917E+25 -141.86 58.01 Continuum-Link [PLUG]: -1.13E+18 -7.98E+16 -1.79E+18 2.116E+18 -175.97 -57.53 ------------------------------------------------------------------------------------- Side-Strength: -2.05E+25 -1.61E+25 4.17E+25 4.917E+25 -141.86 58.01 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.03E+24 4.27E+23 -7.81E+23 1.365E+24 22.40 -34.91 Side-Strength: -2.05E+25 -1.61E+25 4.17E+25 4.917E+25 -141.86 58.01 Basal-Strength: 1.95E+25 1.57E+25 -4.09E+25 4.794E+25 38.84 -58.60 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.17E+07 -2.40E+07 -1.14E+07 4.137E+07 -37.04 -16.02 Suggested viewpoint for orthographic projection of torques on this plate is: ( 100.88E, 15.96N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.34E+17 -2.24E+16 1.66E+17 2.142E+17 323.5 Side-strength: -6.87E+18 -3.04E+17 -3.49E+18 7.717E+18 118.1 Basal-strength: 6.74E+18 3.26E+17 3.33E+18 7.524E+18 297.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 132.17E, -1.47N). ====================================================================================== Plate # 10 =BR: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 6.72E+22 -6.04E+23 -2.57E+23 6.594E+23 -83.65 -22.93 Velocity-Boundary-C.'s -4.63E+16 -3.00E+17 2.13E+17 3.712E+17 -98.76 35.05 ------------------------------------------------------------------------------------- Basal-Strength: 6.72E+22 -6.04E+23 -2.57E+23 6.594E+23 -83.65 -22.93 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.17E+22 9.81E+23 3.47E+23 1.043E+24 94.18 19.42 Continuum-Link [PLUG]: 2.55E+16 6.40E+16 -5.68E+16 8.924E+16 68.28 -39.50 ------------------------------------------------------------------------------------- Side-Strength: -7.17E+22 9.81E+23 3.47E+23 1.043E+24 94.18 19.42 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.54E+21 -3.78E+23 -8.98E+22 3.881E+23 -89.31 -13.38 Side-Strength: -7.17E+22 9.81E+23 3.47E+23 1.043E+24 94.18 19.42 Basal-Strength: 6.72E+22 -6.04E+23 -2.57E+23 6.594E+23 -83.65 -22.93 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.75E+07 -2.45E+06 7.22E+06 2.858E+07 -5.07 14.62 Suggested viewpoint for orthographic projection of torques on this plate is: ( 173.51E,-27.71N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.90E+16 1.27E+16 -5.21E+16 6.091E+16 195.1 Side-strength: -7.71E+16 -5.31E+16 1.34E+17 1.637E+17 22.1 Basal-strength: 4.81E+16 4.04E+16 -8.23E+16 1.035E+17 206.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 176.27E, -15.30N). ====================================================================================== Plate # 11 =BS: 30 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.89E+24 7.81E+23 -1.69E+25 1.737E+25 11.35 -76.80 Velocity-Boundary-C.'s -2.98E+17 -8.78E+16 -7.45E+17 8.075E+17 -163.57 -67.39 ------------------------------------------------------------------------------------- Basal-Strength: 3.89E+24 7.81E+23 -1.69E+25 1.737E+25 11.35 -76.80 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.84E+24 3.85E+24 1.11E+25 1.238E+25 45.07 63.97 Continuum-Link [PLUG]: -8.99E+17 -1.08E+17 1.34E+18 1.619E+18 -173.18 56.00 ------------------------------------------------------------------------------------- Side-Strength: 3.84E+24 3.85E+24 1.11E+25 1.238E+25 45.07 63.97 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -7.73E+24 -4.63E+24 5.78E+24 1.070E+25 -149.08 32.71 Side-Strength: 3.84E+24 3.85E+24 1.11E+25 1.238E+25 45.07 63.97 Basal-Strength: 3.89E+24 7.81E+23 -1.69E+25 1.737E+25 11.35 -76.80 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.05E+06 -5.62E+06 -3.22E+06 8.218E+06 -48.07 -23.10 Suggested viewpoint for orthographic projection of torques on this plate is: ( 124.29E, -5.22N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -6.81E+17 -6.20E+17 -1.41E+18 1.680E+18 147.1 Side-strength: -1.49E+18 -9.25E+17 8.34E+17 1.944E+18 64.5 Basal-strength: 2.17E+18 1.54E+18 5.71E+17 2.727E+18 282.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 126.16E, -4.61N). ====================================================================================== Plate # 12 =BU: 28 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.36E+25 9.02E+23 -1.16E+25 3.559E+25 1.54 -19.10 Velocity-Boundary-C.'s -9.13E+18 8.07E+17 -1.42E+19 1.689E+19 174.95 -57.11 ------------------------------------------------------------------------------------- Basal-Strength: 3.36E+25 9.02E+23 -1.16E+25 3.559E+25 1.54 -19.10 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.20E+25 -1.98E+23 1.27E+25 2.545E+25 -179.49 30.01 Continuum-Link [PLUG]: -4.39E+24 3.57E+23 -2.45E+24 5.040E+24 175.36 -29.03 ------------------------------------------------------------------------------------- Side-Strength: -2.64E+25 1.59E+23 1.03E+25 2.836E+25 179.66 21.26 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -7.19E+24 -1.06E+24 1.36E+24 7.391E+24 -171.61 10.61 Side-Strength: -2.64E+25 1.59E+23 1.03E+25 2.836E+25 179.66 21.26 Basal-Strength: 3.36E+25 9.02E+23 -1.16E+25 3.559E+25 1.54 -19.10 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.24E+07 -1.74E+08 -3.16E+07 1.783E+08 -82.68 -10.19 Suggested viewpoint for orthographic projection of torques on this plate is: ( 106.34E,-36.42N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -6.61E+16 -7.18E+17 -9.09E+17 1.160E+18 166.8 Side-strength: -1.26E+18 -2.83E+18 -3.20E+18 4.451E+18 153.2 Basal-strength: 1.33E+18 3.55E+18 4.11E+18 5.586E+18 336.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 94.11E, 9.26N). ====================================================================================== Plate # 13 =CA: 82 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 5.52E+25 1.42E+25 1.12E+26 1.260E+26 14.45 63.09 Velocity-Boundary-C.'s -2.03E+25 -3.31E+24 7.49E+23 2.060E+25 -170.75 2.08 ------------------------------------------------------------------------------------- Basal-Strength: 3.49E+25 1.09E+25 1.13E+26 1.189E+26 17.37 72.09 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.44E+25 7.56E+24 -1.15E+26 1.157E+26 27.67 -81.91 Continuum-Link [PLUG]: 6.39E+18 1.68E+18 -4.35E+18 7.908E+18 14.74 -33.37 ------------------------------------------------------------------------------------- Side-Strength: 1.44E+25 7.56E+24 -1.15E+26 1.157E+26 27.67 -81.91 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.93E+25 -1.85E+25 1.46E+24 5.267E+25 -159.46 1.59 Side-Strength: 1.44E+25 7.56E+24 -1.15E+26 1.157E+26 27.67 -81.91 Basal-Strength: 3.49E+25 1.09E+25 1.13E+26 1.189E+26 17.37 72.09 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.96E+07 -5.81E+07 2.24E+07 6.532E+07 -71.34 20.06 Suggested viewpoint for orthographic projection of torques on this plate is: ( -69.49E, -1.01N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.67E+17 -5.65E+16 8.26E+18 8.268E+18 1.6 Side-strength: -1.69E+19 -6.26E+18 -2.53E+18 1.816E+19 262.0 Basal-strength: 1.66E+19 6.32E+18 -5.73E+18 1.866E+19 107.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -73.53E, 15.08N). ====================================================================================== Plate # 14 =CL: 42 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -6.39E+24 -1.21E+25 5.99E+25 6.146E+25 -117.93 77.17 ------------------------------------------------------------------------------------- Basal-Strength: -6.39E+24 -1.21E+25 5.99E+25 6.146E+25 -117.93 77.17 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.05E+24 4.38E+24 -5.57E+25 5.591E+25 76.49 -85.37 Continuum-Link [PLUG]: 1.57E+18 1.98E+18 2.68E+17 2.540E+18 51.57 6.05 ------------------------------------------------------------------------------------- Side-Strength: 1.05E+24 4.38E+24 -5.57E+25 5.591E+25 76.49 -85.37 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.34E+24 7.67E+24 -4.20E+24 1.025E+25 55.17 -24.20 Side-Strength: 1.05E+24 4.38E+24 -5.57E+25 5.591E+25 76.49 -85.37 Basal-Strength: -6.39E+24 -1.21E+25 5.99E+25 6.146E+25 -117.93 77.17 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -7.01E+06 3.98E+06 6.60E+06 1.042E+07 150.40 39.30 Suggested viewpoint for orthographic projection of torques on this plate is: ( 144.38E, 1.74N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 4.20E+17 5.10E+17 1.47E+18 1.609E+18 335.8 Side-strength: 5.11E+18 7.10E+18 6.55E+17 8.776E+18 274.3 Basal-strength: -5.53E+18 -7.61E+18 -2.12E+18 9.647E+18 102.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 140.66E, 3.27N). ====================================================================================== Plate # 15 =CO: 78 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -2.24E+25 4.61E+24 1.32E+25 2.638E+25 168.35 30.03 ------------------------------------------------------------------------------------- Basal-Strength: -2.24E+25 4.61E+24 1.32E+25 2.638E+25 168.35 30.03 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.26E+25 -6.29E+24 -1.75E+25 3.755E+25 -10.92 -27.83 Continuum-Link [PLUG]: 3.86E+15 9.36E+16 4.03E+17 4.136E+17 87.64 76.91 ------------------------------------------------------------------------------------- Side-Strength: 3.26E+25 -6.29E+24 -1.75E+25 3.755E+25 -10.92 -27.83 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.02E+25 1.68E+24 4.33E+24 1.124E+25 170.68 22.64 Side-Strength: 3.26E+25 -6.29E+24 -1.75E+25 3.755E+25 -10.92 -27.83 Basal-Strength: -2.24E+25 4.61E+24 1.32E+25 2.638E+25 168.35 30.03 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -9.77E+05 3.16E+06 2.85E+05 3.320E+06 107.18 4.93 Suggested viewpoint for orthographic projection of torques on this plate is: ( -93.31E, 14.09N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.22E+17 3.53E+17 1.57E+18 1.764E+18 23.4 Side-strength: -2.90E+18 -1.09E+18 -5.01E+18 5.894E+18 208.8 Basal-strength: 2.18E+18 7.39E+17 3.44E+18 4.141E+18 31.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -94.37E, 8.34N). ====================================================================================== Plate # 16 =CR: 11 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -7.67E+22 5.18E+23 3.37E+23 6.227E+23 98.43 32.78 Velocity-Boundary-C.'s 1.38E+16 5.28E+16 -2.49E+16 6.000E+16 75.39 -24.54 ------------------------------------------------------------------------------------- Basal-Strength: -7.67E+22 5.18E+23 3.37E+23 6.227E+23 98.43 32.78 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.78E+22 -3.09E+23 -2.27E+23 3.865E+23 -81.22 -35.95 Continuum-Link [PLUG]: -1.34E+16 -2.58E+16 3.37E+16 4.453E+16 -117.40 49.20 ------------------------------------------------------------------------------------- Side-Strength: 4.78E+22 -3.09E+23 -2.27E+23 3.865E+23 -81.22 -35.95 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.90E+22 -2.09E+23 -1.10E+23 2.377E+23 -82.09 -27.62 Side-Strength: 4.78E+22 -3.09E+23 -2.27E+23 3.865E+23 -81.22 -35.95 Basal-Strength: -7.67E+22 5.18E+23 3.37E+23 6.227E+23 98.43 32.78 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -6.10E+06 1.10E+06 -1.77E+06 6.449E+06 169.81 -15.91 Suggested viewpoint for orthographic projection of torques on this plate is: (-174.36E, -4.32N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.68E+14 1.75E+16 -3.29E+16 3.731E+16 207.7 Side-strength: 1.59E+14 3.59E+16 -4.89E+16 6.067E+16 216.1 Basal-strength: -9.27E+14 -5.34E+16 8.18E+16 9.774E+16 32.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 174.85E, -19.11N). ====================================================================================== Plate # 17 =EA: 11 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.94E+23 7.58E+22 1.92E+22 2.088E+23 158.62 5.29 Velocity-Boundary-C.'s 2.24E+16 -1.88E+15 -1.61E+16 2.761E+16 -4.81 -35.67 ------------------------------------------------------------------------------------- Basal-Strength: -1.94E+23 7.58E+22 1.92E+22 2.088E+23 158.62 5.29 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.97E+23 -1.63E+23 -1.14E+23 5.354E+23 -18.19 -12.32 Continuum-Link [PLUG]: -1.05E+16 -1.41E+16 -4.80E+16 5.114E+16 -126.75 -69.90 ------------------------------------------------------------------------------------- Side-Strength: 4.97E+23 -1.63E+23 -1.14E+23 5.354E+23 -18.19 -12.32 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.03E+23 8.75E+22 9.50E+22 3.297E+23 163.90 16.76 Side-Strength: 4.97E+23 -1.63E+23 -1.14E+23 5.354E+23 -18.19 -12.32 Basal-Strength: -1.94E+23 7.58E+22 1.92E+22 2.088E+23 158.62 5.29 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.60E+05 -5.56E+05 -2.95E+05 7.797E+05 -129.63 -22.25 Suggested viewpoint for orthographic projection of torques on this plate is: (-113.72E,-23.78N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 6.96E+15 -2.47E+16 4.49E+16 5.174E+16 18.4 Side-strength: -4.69E+15 3.81E+16 -7.48E+16 8.403E+16 193.5 Basal-strength: -2.27E+15 -1.34E+16 2.98E+16 3.277E+16 5.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-113.85E, -24.61N). ====================================================================================== Plate # 18 =EU: 2108 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.53E+26 1.65E+26 7.26E+24 3.020E+26 146.86 1.38 Velocity-Boundary-C.'s 3.21E+24 -5.23E+24 -3.44E+24 7.033E+24 -58.44 -29.28 ------------------------------------------------------------------------------------- Basal-Strength: -2.50E+26 1.60E+26 3.82E+24 2.964E+26 147.37 0.74 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.56E+26 -1.74E+26 -1.48E+24 2.343E+26 -48.10 -0.36 Continuum-Link [PLUG]: 4.74E+25 -1.87E+24 -1.44E+25 4.956E+25 -2.25 -16.93 ------------------------------------------------------------------------------------- Side-Strength: 2.04E+26 -1.76E+26 -1.59E+25 2.700E+26 -40.85 -3.38 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.58E+25 1.64E+25 1.21E+25 5.010E+25 19.77 13.97 Side-Strength: 2.04E+26 -1.76E+26 -1.59E+25 2.700E+26 -40.85 -3.38 Basal-Strength: -2.50E+26 1.60E+26 3.82E+24 2.964E+26 147.37 0.74 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -9.63E+05 6.61E+05 4.53E+03 1.168E+06 145.54 0.22 Suggested viewpoint for orthographic projection of torques on this plate is: (-120.35E, 72.04N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.96E+18 -7.13E+18 -1.51E+18 7.864E+18 128.5 Side-strength: -2.70E+19 -3.00E+19 -1.28E+19 4.237E+19 191.0 Basal-strength: 2.40E+19 3.72E+19 1.43E+19 4.652E+19 2.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 60.26E, 48.94N). ====================================================================================== Plate # 19 =FT: 4 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.37E+23 3.24E+23 4.64E+23 5.818E+23 113.00 52.83 Velocity-Boundary-C.'s -2.26E+16 7.06E+16 8.36E+16 1.117E+17 107.72 48.45 ------------------------------------------------------------------------------------- Basal-Strength: -1.37E+23 3.24E+23 4.64E+23 5.818E+23 113.00 52.83 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.24E+23 -2.36E+23 -4.22E+23 4.995E+23 -62.28 -57.68 Continuum-Link [PLUG]: 1.65E+15 1.70E+16 -2.15E+16 2.745E+16 84.45 -51.58 ------------------------------------------------------------------------------------- Side-Strength: 1.24E+23 -2.36E+23 -4.22E+23 4.995E+23 -62.28 -57.68 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.31E+22 -8.71E+22 -4.14E+22 9.733E+22 -81.43 -25.19 Side-Strength: 1.24E+23 -2.36E+23 -4.22E+23 4.995E+23 -62.28 -57.68 Basal-Strength: -1.37E+23 3.24E+23 4.64E+23 5.818E+23 113.00 52.83 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.31E+07 -1.82E+05 -9.43E+06 4.409E+07 -179.76 -12.35 Suggested viewpoint for orthographic projection of torques on this plate is: (-179.17E,-15.97N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.67E+15 6.82E+15 -1.32E+16 1.528E+16 206.3 Side-strength: 9.29E+15 6.91E+16 -3.59E+16 7.841E+16 241.5 Basal-strength: -1.30E+16 -7.59E+16 4.91E+16 9.131E+16 56.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-177.89E, -14.96N). ====================================================================================== Plate # 20 =GP: 5 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.13E+23 1.87E+22 -1.01E+23 1.527E+23 170.61 -41.19 Velocity-Boundary-C.'s 2.51E+16 -6.99E+15 -4.17E+16 4.916E+16 -15.56 -57.99 ------------------------------------------------------------------------------------- Basal-Strength: -1.13E+23 1.87E+22 -1.01E+23 1.527E+23 170.61 -41.19 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.93E+23 -3.91E+22 -8.69E+21 1.974E+23 -11.45 -2.52 Continuum-Link [PLUG]: -8.03E+15 1.10E+15 4.65E+16 4.720E+16 172.18 80.11 ------------------------------------------------------------------------------------- Side-Strength: 1.93E+23 -3.91E+22 -8.69E+21 1.974E+23 -11.45 -2.52 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -7.99E+22 2.04E+22 1.09E+23 1.368E+23 165.68 52.97 Side-Strength: 1.93E+23 -3.91E+22 -8.69E+21 1.974E+23 -11.45 -2.52 Basal-Strength: -1.13E+23 1.87E+22 -1.01E+23 1.527E+23 170.61 -41.19 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -6.29E+07 -2.97E+08 8.53E+06 3.032E+08 -101.97 1.61 Suggested viewpoint for orthographic projection of torques on this plate is: (-101.35E, 2.24N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.69E+16 -2.88E+15 1.29E+16 2.148E+16 53.0 Side-strength: -1.58E+15 -9.17E+14 -3.09E+16 3.098E+16 182.5 Basal-strength: -1.53E+16 3.80E+15 1.80E+16 2.397E+16 318.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-101.67E, 1.90N). ====================================================================================== Plate # 21 =IN: 312 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.59E+23 -1.62E+23 7.11E+23 7.734E+23 -31.94 66.73 Velocity-Boundary-C.'s -9.50E+25 -2.03E+25 9.56E+25 1.363E+26 -167.93 44.54 ------------------------------------------------------------------------------------- Basal-Strength: -9.47E+25 -2.05E+25 9.63E+25 1.366E+26 -167.80 44.82 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.26E+25 1.55E+25 1.17E+25 7.519E+25 167.96 8.92 Continuum-Link [PLUG]: 2.07E+26 -1.86E+24 -1.05E+26 2.322E+26 -0.52 -26.86 ------------------------------------------------------------------------------------- Side-Strength: 1.34E+26 1.36E+25 -9.32E+25 1.642E+26 5.78 -34.60 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.98E+25 6.86E+24 -3.07E+24 4.046E+25 170.21 -4.36 Side-Strength: 1.34E+26 1.36E+25 -9.32E+25 1.642E+26 5.78 -34.60 Basal-Strength: -9.47E+25 -2.05E+25 9.63E+25 1.366E+26 -167.80 44.82 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -2.22E+06 -4.44E+06 2.66E+05 4.973E+06 -116.59 3.06 Suggested viewpoint for orthographic projection of torques on this plate is: ( 81.75E, 19.37N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 8.07E+17 2.00E+18 -5.97E+18 6.350E+18 184.6 Side-strength: 1.44E+19 -8.99E+18 1.94E+19 2.578E+19 323.0 Basal-strength: -1.52E+19 6.98E+18 -1.34E+19 2.145E+19 131.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 78.65E, 14.95N). ====================================================================================== Plate # 22 =JF: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s 7.25E+24 7.76E+24 9.88E+24 1.451E+25 46.92 42.94 ------------------------------------------------------------------------------------- Basal-Strength: 7.25E+24 7.76E+24 9.88E+24 1.451E+25 46.92 42.94 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.19E+24 -6.87E+24 -9.23E+24 1.356E+25 -136.32 -42.87 Continuum-Link [PLUG]: 1.57E+17 4.40E+17 3.52E+17 5.855E+17 70.32 36.98 ------------------------------------------------------------------------------------- Side-Strength: -7.19E+24 -6.87E+24 -9.23E+24 1.356E+25 -136.32 -42.87 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -6.52E+22 -8.92E+23 -6.56E+23 1.109E+24 -94.18 -36.25 Side-Strength: -7.19E+24 -6.87E+24 -9.23E+24 1.356E+25 -136.32 -42.87 Basal-Strength: 7.25E+24 7.76E+24 9.88E+24 1.451E+25 46.92 42.94 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 4.31E+07 5.52E+07 -5.86E+07 9.133E+07 52.00 -39.91 Suggested viewpoint for orthographic projection of torques on this plate is: (-132.21E, 47.05N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.54E+17 5.46E+16 -5.89E+16 1.741E+17 240.2 Side-strength: -1.52E+18 1.49E+18 7.62E+16 2.129E+18 273.0 Basal-strength: 1.67E+18 -1.54E+18 -1.73E+16 2.277E+18 90.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-127.50E, 45.49N). ====================================================================================== Plate # 23 =JZ: 8 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -9.52E+23 2.50E+23 1.78E+23 1.000E+24 165.29 10.26 Velocity-Boundary-C.'s -8.94E+16 1.63E+16 2.60E+16 9.455E+16 169.67 15.98 ------------------------------------------------------------------------------------- Basal-Strength: -9.52E+23 2.50E+23 1.78E+23 1.000E+24 165.29 10.26 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 8.83E+23 -1.59E+23 -2.70E+23 9.371E+23 -10.20 -16.78 Continuum-Link [PLUG]: 8.18E+16 6.67E+15 -4.70E+16 9.455E+16 4.66 -29.81 ------------------------------------------------------------------------------------- Side-Strength: 8.83E+23 -1.59E+23 -2.70E+23 9.371E+23 -10.20 -16.78 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.90E+22 -9.10E+22 9.22E+22 1.468E+23 -52.83 38.91 Side-Strength: 8.83E+23 -1.59E+23 -2.70E+23 9.371E+23 -10.20 -16.78 Basal-Strength: -9.52E+23 2.50E+23 1.78E+23 1.000E+24 165.29 10.26 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.02E+07 3.12E+07 2.20E+07 3.958E+07 71.84 33.83 Suggested viewpoint for orthographic projection of torques on this plate is: (-111.42E,-32.84N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.91E+16 1.43E+15 -1.29E+16 2.305E+16 131.6 Side-strength: -1.97E+16 8.82E+16 -1.16E+17 1.471E+17 200.1 Basal-strength: 6.05E+14 -8.96E+16 1.29E+17 1.570E+17 12.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-110.92E, -33.34N). ====================================================================================== Plate # 24 =KE: 33 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.33E+24 -3.98E+24 7.62E+24 9.628E+24 -137.47 52.34 Velocity-Boundary-C.'s 1.95E+17 -1.28E+17 -1.86E+17 2.983E+17 -33.20 -38.53 ------------------------------------------------------------------------------------- Basal-Strength: -4.33E+24 -3.98E+24 7.62E+24 9.628E+24 -137.47 52.34 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.38E+25 7.65E+24 -2.29E+25 2.781E+25 28.94 -55.37 Continuum-Link [PLUG]: 5.54E+17 2.90E+16 -8.13E+17 9.845E+17 3.00 -55.72 ------------------------------------------------------------------------------------- Side-Strength: 1.38E+25 7.65E+24 -2.29E+25 2.781E+25 28.94 -55.37 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -9.50E+24 -3.67E+24 1.53E+25 1.835E+25 -158.87 56.29 Side-Strength: 1.38E+25 7.65E+24 -2.29E+25 2.781E+25 28.94 -55.37 Basal-Strength: -4.33E+24 -3.98E+24 7.62E+24 9.628E+24 -137.47 52.34 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.16E+07 -1.07E+06 1.07E+07 1.580E+07 -5.28 42.71 Suggested viewpoint for orthographic projection of torques on this plate is: (-169.18E,-33.28N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 6.92E+17 -2.79E+18 -2.39E+17 2.880E+18 95.7 Side-strength: -1.22E+18 4.14E+18 6.45E+17 4.366E+18 280.2 Basal-strength: 5.30E+17 -1.36E+18 -4.06E+17 1.511E+18 108.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-179.62E, -33.55N). ====================================================================================== Plate # 25 =MA: 27 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.80E+24 -4.57E+24 1.62E+25 1.706E+25 -58.45 71.68 Velocity-Boundary-C.'s -3.37E+17 1.04E+16 -8.04E+17 8.719E+17 178.24 -67.24 ------------------------------------------------------------------------------------- Basal-Strength: 2.80E+24 -4.57E+24 1.62E+25 1.706E+25 -58.45 71.68 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.65E+24 5.34E+24 -2.39E+25 2.511E+25 136.61 -71.96 Continuum-Link [PLUG]: 6.33E+17 1.08E+18 -1.29E+17 1.259E+18 59.66 -5.86 ------------------------------------------------------------------------------------- Side-Strength: -5.65E+24 5.34E+24 -2.39E+25 2.511E+25 136.61 -71.96 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.85E+24 -7.74E+23 7.69E+24 8.232E+24 -15.21 69.00 Side-Strength: -5.65E+24 5.34E+24 -2.39E+25 2.511E+25 136.61 -71.96 Basal-Strength: 2.80E+24 -4.57E+24 1.62E+25 1.706E+25 -58.45 71.68 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -2.39E+07 1.54E+07 1.59E+07 3.256E+07 147.11 29.16 Suggested viewpoint for orthographic projection of torques on this plate is: ( 132.60E, 18.00N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -8.82E+17 -9.15E+17 2.35E+17 1.292E+18 79.0 Side-strength: 2.88E+18 2.69E+18 -8.13E+16 3.942E+18 268.8 Basal-strength: -2.00E+18 -1.77E+18 -1.53E+17 2.677E+18 93.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 145.30E, 17.93N). ====================================================================================== Plate # 26 =MN: 4 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.43E+23 4.17E+23 -9.91E+22 4.929E+23 59.77 -11.60 Velocity-Boundary-C.'s 8.05E+15 1.11E+16 -3.06E+16 3.356E+16 54.11 -65.84 ------------------------------------------------------------------------------------- Basal-Strength: 2.43E+23 4.17E+23 -9.91E+22 4.929E+23 59.77 -11.60 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.08E+23 -3.85E+23 -1.32E+23 4.571E+23 -118.37 -16.73 Continuum-Link [PLUG]: 9.78E+15 3.92E+16 4.34E+15 4.063E+16 75.99 6.13 ------------------------------------------------------------------------------------- Side-Strength: -2.08E+23 -3.85E+23 -1.32E+23 4.571E+23 -118.37 -16.73 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.51E+22 -3.20E+22 2.31E+23 2.356E+23 -137.62 78.37 Side-Strength: -2.08E+23 -3.85E+23 -1.32E+23 4.571E+23 -118.37 -16.73 Basal-Strength: 2.43E+23 4.17E+23 -9.91E+22 4.929E+23 59.77 -11.60 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.74E+08 -8.71E+07 9.96E+06 1.947E+08 -26.61 2.93 Suggested viewpoint for orthographic projection of torques on this plate is: ( 150.53E, -3.67N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.75E+16 -3.18E+16 -7.07E+15 3.697E+16 101.0 Side-strength: 1.40E+16 1.59E+16 -6.86E+16 7.175E+16 196.8 Basal-strength: 3.45E+15 1.60E+16 7.56E+16 7.737E+16 348.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 150.49E, -3.55N). ====================================================================================== Plate # 27 =MO: 10 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 6.06E+24 7.72E+24 1.04E+25 1.432E+25 51.87 46.77 Velocity-Boundary-C.'s -6.91E+17 -7.60E+17 -3.81E+17 1.096E+18 -132.30 -20.36 ------------------------------------------------------------------------------------- Basal-Strength: 6.06E+24 7.72E+24 1.04E+25 1.432E+25 51.87 46.77 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.22E+25 -1.47E+25 -1.16E+25 2.241E+25 -129.74 -31.31 Continuum-Link [PLUG]: -2.11E+17 -4.95E+16 7.03E+17 7.357E+17 -166.79 72.88 ------------------------------------------------------------------------------------- Side-Strength: -1.22E+25 -1.47E+25 -1.16E+25 2.241E+25 -129.74 -31.31 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.18E+24 7.00E+24 1.21E+24 9.418E+24 48.58 7.37 Side-Strength: -1.22E+25 -1.47E+25 -1.16E+25 2.241E+25 -129.74 -31.31 Basal-Strength: 6.06E+24 7.72E+24 1.04E+25 1.432E+25 51.87 46.77 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -2.41E+06 2.05E+07 1.37E+07 2.477E+07 96.70 33.56 Suggested viewpoint for orthographic projection of torques on this plate is: ( 138.13E, -3.51N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.94E+17 -8.16E+16 1.46E+18 1.478E+18 7.4 Side-strength: 1.36E+18 1.24E+18 -3.00E+18 3.517E+18 211.4 Basal-strength: -1.17E+18 -1.16E+18 1.53E+18 2.248E+18 46.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 137.94E, -3.44N). ====================================================================================== Plate # 28 =MS: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 6.36E+24 3.41E+24 -2.41E+24 7.611E+24 28.21 -18.48 Velocity-Boundary-C.'s 1.58E+19 1.22E+19 1.89E+19 2.751E+19 37.66 43.51 ------------------------------------------------------------------------------------- Basal-Strength: 6.36E+24 3.41E+24 -2.41E+24 7.611E+24 28.21 -18.48 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -6.32E+24 -2.86E+24 5.27E+24 8.709E+24 -155.67 37.24 Continuum-Link [PLUG]: 6.48E+16 -2.21E+17 -9.01E+17 9.300E+17 -73.62 -75.68 ------------------------------------------------------------------------------------- Side-Strength: -6.32E+24 -2.86E+24 5.27E+24 8.709E+24 -155.67 37.24 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.33E+22 -5.56E+23 -2.86E+24 2.912E+24 -94.45 -78.95 Side-Strength: -6.32E+24 -2.86E+24 5.27E+24 8.709E+24 -155.67 37.24 Basal-Strength: 6.36E+24 3.41E+24 -2.41E+24 7.611E+24 28.21 -18.48 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.68E+07 -8.11E+07 1.08E+06 9.907E+07 -54.99 0.63 Suggested viewpoint for orthographic projection of torques on this plate is: ( 121.25E, -9.01N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.92E+17 2.29E+17 -5.05E+16 4.571E+17 263.6 Side-strength: -6.28E+17 -5.79E+17 -1.07E+18 1.367E+18 142.2 Basal-strength: 2.36E+17 3.50E+17 1.12E+18 1.195E+18 341.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 123.34E, -1.07N). ====================================================================================== Plate # 29 =NA: 1860 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.49E+25 -1.75E+26 -1.20E+26 2.166E+26 -104.43 -33.68 Velocity-Boundary-C.'s 1.04E+25 5.03E+24 -2.40E+24 1.182E+25 25.73 -11.71 ------------------------------------------------------------------------------------- Basal-Strength: -3.45E+25 -1.70E+26 -1.23E+26 2.120E+26 -101.49 -35.31 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.86E+25 1.30E+26 1.09E+26 1.873E+26 121.11 35.67 Continuum-Link [PLUG]: 5.40E+25 4.52E+25 3.17E+23 7.040E+25 39.90 0.26 ------------------------------------------------------------------------------------- Side-Strength: -2.46E+25 1.75E+26 1.10E+26 2.083E+26 97.98 31.72 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.91E+25 -5.93E+24 1.30E+25 6.077E+25 -5.74 12.34 Side-Strength: -2.46E+25 1.75E+26 1.10E+26 2.083E+26 97.98 31.72 Basal-Strength: -3.45E+25 -1.70E+26 -1.23E+26 2.120E+26 -101.49 -35.31 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -8.62E+04 -4.79E+05 -5.13E+05 7.071E+05 -100.20 -46.50 Suggested viewpoint for orthographic projection of torques on this plate is: (-113.34E, 54.11N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.43E+17 -7.98E+18 -5.21E+18 9.538E+18 158.6 Side-strength: 3.16E+19 -8.64E+17 8.47E+18 3.269E+19 63.8 Basal-strength: -3.19E+19 8.85E+18 -3.27E+18 3.327E+19 260.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-104.07E, 53.48N). ====================================================================================== Plate # 30 =NB: 21 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.22E+25 2.10E+25 -2.61E+25 3.566E+25 59.82 -47.12 Velocity-Boundary-C.'s 4.96E+24 6.83E+24 -8.29E+24 1.183E+25 53.98 -44.48 ------------------------------------------------------------------------------------- Basal-Strength: 1.72E+25 2.78E+25 -3.44E+25 4.746E+25 58.31 -46.49 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.53E+25 -2.41E+25 3.57E+25 4.570E+25 -122.46 51.36 Continuum-Link [PLUG]: 1.03E+18 1.04E+18 -1.15E+17 1.471E+18 45.29 -4.47 ------------------------------------------------------------------------------------- Side-Strength: -1.53E+25 -2.41E+25 3.57E+25 4.570E+25 -122.46 51.36 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.84E+24 -3.72E+24 -1.28E+24 4.348E+24 -116.35 -17.15 Side-Strength: -1.53E+25 -2.41E+25 3.57E+25 4.570E+25 -122.46 51.36 Basal-Strength: 1.72E+25 2.78E+25 -3.44E+25 4.746E+25 58.31 -46.49 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.12E+08 8.42E+07 -2.05E+07 1.413E+08 142.96 -8.34 Suggested viewpoint for orthographic projection of torques on this plate is: ( 152.44E, -3.91N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.33E+17 1.58E+17 -6.50E+17 6.824E+17 197.2 Side-strength: -2.33E+18 -5.12E+18 -4.45E+18 7.174E+18 128.5 Basal-strength: 2.20E+18 4.96E+18 5.10E+18 7.449E+18 313.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.39E, -2.80N). ====================================================================================== Plate # 31 =ND: 37 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.89E+24 -4.14E+24 3.77E+24 6.813E+24 -133.24 33.55 Velocity-Boundary-C.'s 2.71E+17 2.09E+17 1.75E+18 1.780E+18 37.66 78.91 ------------------------------------------------------------------------------------- Basal-Strength: -3.89E+24 -4.14E+24 3.77E+24 6.813E+24 -133.24 33.55 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.85E+25 7.92E+24 4.25E+24 2.054E+25 23.22 11.93 Continuum-Link [PLUG]: 5.63E+17 3.64E+17 7.87E+17 1.034E+18 32.89 49.55 ------------------------------------------------------------------------------------- Side-Strength: 1.85E+25 7.92E+24 4.25E+24 2.054E+25 23.22 11.93 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.46E+25 -3.79E+24 -8.01E+24 1.706E+25 -165.44 -28.01 Side-Strength: 1.85E+25 7.92E+24 4.25E+24 2.054E+25 23.22 11.93 Basal-Strength: -3.89E+24 -4.14E+24 3.77E+24 6.813E+24 -133.24 33.55 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.63E+07 -6.47E+07 7.95E+06 6.720E+07 -75.89 6.80 Suggested viewpoint for orthographic projection of torques on this plate is: ( -61.16E,-24.89N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -7.49E+17 -1.51E+18 2.08E+18 2.678E+18 328.8 Side-strength: 6.30E+15 1.51E+18 -2.85E+18 3.224E+18 166.8 Basal-strength: 7.43E+17 1.69E+15 7.69E+17 1.069E+18 37.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -75.49E, 5.94N). ====================================================================================== Plate # 32 =NH: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 4.90E+24 -1.47E+24 -1.47E+25 1.559E+25 -16.69 -70.83 Velocity-Boundary-C.'s 1.23E+17 2.27E+16 -5.04E+17 5.191E+17 10.48 -76.07 ------------------------------------------------------------------------------------- Basal-Strength: 4.90E+24 -1.47E+24 -1.47E+25 1.559E+25 -16.69 -70.83 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.43E+24 2.66E+24 1.68E+25 1.783E+25 153.90 70.20 Continuum-Link [PLUG]: 3.96E+16 1.17E+17 -2.58E+15 1.238E+17 71.32 -1.19 ------------------------------------------------------------------------------------- Side-Strength: -5.43E+24 2.66E+24 1.68E+25 1.783E+25 153.90 70.20 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.22E+23 -1.19E+24 -2.06E+24 2.432E+24 -66.28 -57.75 Side-Strength: -5.43E+24 2.66E+24 1.68E+25 1.783E+25 153.90 70.20 Basal-Strength: 4.90E+24 -1.47E+24 -1.47E+25 1.559E+25 -16.69 -70.83 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.63E+07 -4.60E+06 4.57E+06 2.707E+07 -9.92 9.72 Suggested viewpoint for orthographic projection of torques on this plate is: ( 170.58E,-19.03N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.11E+17 3.28E+17 -1.61E+17 3.818E+17 243.5 Side-strength: -5.44E+17 -2.73E+18 2.57E+17 2.799E+18 84.4 Basal-strength: 4.33E+17 2.41E+18 -9.61E+16 2.447E+18 267.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 170.38E, -17.83N). ====================================================================================== Plate # 33 =NI: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.31E+23 -2.80E+24 -3.99E+23 2.849E+24 -83.25 -8.04 Velocity-Boundary-C.'s -2.84E+16 4.26E+17 -1.19E+16 4.270E+17 93.82 -1.59 ------------------------------------------------------------------------------------- Basal-Strength: 3.31E+23 -2.80E+24 -3.99E+23 2.849E+24 -83.25 -8.04 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.33E+23 1.90E+24 -1.31E+23 1.905E+24 94.02 -3.95 Continuum-Link [PLUG]: -3.61E+16 2.02E+16 1.13E+17 1.207E+17 150.74 69.96 ------------------------------------------------------------------------------------- Side-Strength: -1.33E+23 1.90E+24 -1.31E+23 1.905E+24 94.02 -3.95 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.98E+23 9.05E+23 5.30E+23 1.068E+24 102.35 29.75 Side-Strength: -1.33E+23 1.90E+24 -1.31E+23 1.905E+24 94.02 -3.95 Basal-Strength: 3.31E+23 -2.80E+24 -3.99E+23 2.849E+24 -83.25 -8.04 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.49E+06 -3.45E+06 -1.79E+05 3.758E+06 -66.64 -2.73 Suggested viewpoint for orthographic projection of torques on this plate is: (-175.09E,-12.76N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.45E+16 -8.77E+16 1.41E+17 1.676E+17 30.6 Side-strength: -6.75E+16 1.54E+16 2.91E+17 2.991E+17 356.0 Basal-strength: 9.19E+16 7.23E+16 -4.32E+17 4.472E+17 188.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-175.80E, -16.91N). ====================================================================================== Plate # 34 =NZ: 390 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -1.60E+25 -2.04E+25 5.75E+25 6.307E+25 -128.08 65.72 ------------------------------------------------------------------------------------- Basal-Strength: -1.60E+25 -2.04E+25 5.75E+25 6.307E+25 -128.08 65.72 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 9.72E+24 3.09E+25 -8.39E+25 8.996E+25 72.54 -68.90 Continuum-Link [PLUG]: 6.88E+17 -3.65E+17 -4.57E+16 7.805E+17 -27.96 -3.36 ------------------------------------------------------------------------------------- Side-Strength: 9.72E+24 3.09E+25 -8.39E+25 8.996E+25 72.54 -68.90 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.28E+24 -1.05E+25 2.64E+25 2.913E+25 -59.07 65.20 Side-Strength: 9.72E+24 3.09E+25 -8.39E+25 8.996E+25 72.54 -68.90 Basal-Strength: -1.60E+25 -2.04E+25 5.75E+25 6.307E+25 -128.08 65.72 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.63E+05 -2.27E+05 5.76E+05 6.406E+05 -125.71 64.10 Suggested viewpoint for orthographic projection of torques on this plate is: ( -94.58E,-20.61N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 4.45E+18 3.69E+16 -1.04E+18 4.572E+18 104.1 Side-strength: -1.40E+19 1.52E+18 -1.06E+18 1.412E+19 265.4 Basal-strength: 9.55E+18 -1.56E+18 2.10E+18 9.899E+18 76.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -92.39E, -19.89N). ====================================================================================== Plate # 35 =OK: 90 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.38E+25 2.30E+24 7.16E+24 3.461E+25 3.90 11.93 Velocity-Boundary-C.'s -1.53E+20 -1.27E+20 -6.00E+19 2.076E+20 -140.44 -16.81 ------------------------------------------------------------------------------------- Basal-Strength: 3.38E+25 2.30E+24 7.16E+24 3.461E+25 3.90 11.93 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.43E+25 2.73E+25 -2.24E+25 4.285E+25 131.63 -31.53 Continuum-Link [PLUG]: -9.80E+24 1.69E+25 -7.47E+24 2.093E+25 120.10 -20.92 ------------------------------------------------------------------------------------- Side-Strength: -3.41E+25 4.42E+25 -2.99E+25 6.331E+25 127.61 -28.16 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.84E+23 -4.65E+25 2.27E+25 5.178E+25 -89.65 26.03 Side-Strength: -3.41E+25 4.42E+25 -2.99E+25 6.331E+25 127.61 -28.16 Basal-Strength: 3.38E+25 2.30E+24 7.16E+24 3.461E+25 3.90 11.93 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.95E+07 -1.07E+07 -2.49E+07 3.340E+07 -28.68 -48.20 Suggested viewpoint for orthographic projection of torques on this plate is: ( 116.71E, 61.40N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -7.94E+18 -8.07E+17 -1.55E+18 8.127E+18 113.5 Side-strength: 8.10E+18 5.70E+18 -7.93E+17 9.938E+18 260.4 Basal-strength: -1.63E+17 -4.90E+18 2.34E+18 5.432E+18 25.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.52E, 51.90N). ====================================================================================== Plate # 36 =ON: 21 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -6.42E+24 -1.43E+25 1.62E+25 2.254E+25 -114.21 46.05 Velocity-Boundary-C.'s 4.92E+17 3.75E+17 -1.02E+17 6.270E+17 37.33 -9.36 ------------------------------------------------------------------------------------- Basal-Strength: -6.42E+24 -1.43E+25 1.62E+25 2.254E+25 -114.21 46.05 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 8.10E+24 1.84E+25 -2.05E+25 2.871E+25 66.30 -45.45 Continuum-Link [PLUG]: -4.67E+17 6.54E+16 -4.18E+17 6.300E+17 172.02 -41.53 ------------------------------------------------------------------------------------- Side-Strength: 8.10E+24 1.84E+25 -2.05E+25 2.871E+25 66.30 -45.45 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.68E+24 -4.17E+24 4.23E+24 6.172E+24 -111.94 43.25 Side-Strength: 8.10E+24 1.84E+25 -2.05E+25 2.871E+25 66.30 -45.45 Basal-Strength: -6.42E+24 -1.43E+25 1.62E+25 2.254E+25 -114.21 46.05 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -7.17E+07 8.13E+07 6.53E+07 1.266E+08 131.41 31.07 Suggested viewpoint for orthographic projection of torques on this plate is: ( 178.98E,-20.78N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.21E+17 -7.14E+17 -6.16E+17 9.688E+17 132.9 Side-strength: -9.73E+17 3.45E+18 2.73E+18 4.506E+18 310.3 Basal-strength: 7.52E+17 -2.74E+18 -2.11E+18 3.538E+18 129.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 127.68E, 27.18N). ====================================================================================== Plate # 37 =PA: 2930 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.87E+20 -8.04E+20 -1.36E+21 1.656E+21 -121.19 -55.39 Velocity-Boundary-C.'s -1.56E+25 1.08E+26 -1.07E+26 1.531E+26 98.20 -44.29 ------------------------------------------------------------------------------------- Basal-Strength: -1.56E+25 1.08E+26 -1.07E+26 1.531E+26 98.20 -44.29 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 2.52E+25 -1.64E+26 2.24E+26 2.786E+26 -81.27 53.46 Continuum-Link [PLUG]: 6.74E+23 -7.83E+23 -5.15E+23 1.154E+24 -49.28 -26.53 ------------------------------------------------------------------------------------- Side-Strength: 2.58E+25 -1.65E+26 2.23E+26 2.787E+26 -81.08 53.25 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.02E+25 5.63E+25 -1.16E+26 1.297E+26 100.28 -63.83 Side-Strength: 2.58E+25 -1.65E+26 2.23E+26 2.787E+26 -81.08 53.25 Basal-Strength: -1.56E+25 1.08E+26 -1.07E+26 1.531E+26 98.20 -44.29 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 4.11E+04 2.17E+05 -2.00E+05 2.982E+05 79.28 -42.22 Suggested viewpoint for orthographic projection of torques on this plate is: (-173.71E, 1.96N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.70E+18 1.82E+19 8.95E+18 2.036E+19 296.1 Side-strength: 2.96E+18 -3.50E+19 -2.61E+19 4.374E+19 126.7 Basal-strength: -1.26E+18 1.68E+19 1.72E+19 2.402E+19 315.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-147.60E, 11.97N). ====================================================================================== Plate # 38 =PM: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.13E+25 -4.08E+24 5.63E+24 3.207E+25 -172.58 10.11 Velocity-Boundary-C.'s -7.96E+17 -9.92E+16 2.30E+17 8.349E+17 -172.90 16.01 ------------------------------------------------------------------------------------- Basal-Strength: -3.13E+25 -4.08E+24 5.63E+24 3.207E+25 -172.58 10.11 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.30E+25 4.53E+24 -4.81E+24 3.362E+25 7.82 -8.23 Continuum-Link [PLUG]: -2.80E+17 -2.63E+17 -2.63E+17 4.660E+17 -136.79 -34.37 ------------------------------------------------------------------------------------- Side-Strength: 3.30E+25 4.53E+24 -4.81E+24 3.362E+25 7.82 -8.23 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.66E+24 -4.47E+23 -8.16E+23 1.901E+24 -164.92 -25.43 Side-Strength: 3.30E+25 4.53E+24 -4.81E+24 3.362E+25 7.82 -8.23 Basal-Strength: -3.13E+25 -4.08E+24 5.63E+24 3.207E+25 -172.58 10.11 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.49E+07 -2.93E+07 7.66E+06 3.372E+07 -116.99 13.13 Suggested viewpoint for orthographic projection of torques on this plate is: ( -80.49E, 11.54N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.38E+17 3.13E+16 2.63E+17 2.984E+17 334.0 Side-strength: -5.88E+17 -1.16E+18 -5.11E+18 5.277E+18 188.4 Basal-strength: 7.26E+17 1.13E+18 4.85E+18 5.034E+18 10.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -81.25E, 8.79N). ====================================================================================== Plate # 39 =PS: 248 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.09E+22 -9.74E+21 4.29E+22 4.535E+22 -41.79 71.20 Velocity-Boundary-C.'s 1.52E+25 3.78E+25 -6.46E+25 7.633E+25 68.13 -57.79 ------------------------------------------------------------------------------------- Basal-Strength: 1.52E+25 3.78E+25 -6.45E+25 7.629E+25 68.11 -57.77 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.35E+25 -2.40E+25 3.41E+25 4.389E+25 -119.41 51.08 Continuum-Link [PLUG]: -7.67E+24 -1.04E+25 1.58E+25 2.045E+25 -126.30 50.71 ------------------------------------------------------------------------------------- Side-Strength: -2.12E+25 -3.45E+25 5.00E+25 6.430E+25 -121.61 51.01 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.04E+24 -3.30E+24 1.46E+25 1.611E+25 -28.61 64.71 Side-Strength: -2.12E+25 -3.45E+25 5.00E+25 6.430E+25 -121.61 51.01 Basal-Strength: 1.52E+25 3.78E+25 -6.45E+25 7.629E+25 68.11 -57.77 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.57E+06 -2.17E+06 -3.41E+06 5.397E+06 -31.33 -39.24 Suggested viewpoint for orthographic projection of torques on this plate is: ( 118.90E, 21.73N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.05E+18 -1.38E+18 5.39E+17 2.528E+18 76.7 Side-strength: -8.38E+18 -2.29E+18 -5.13E+18 1.009E+19 123.2 Basal-strength: 1.04E+19 3.67E+18 4.60E+18 1.197E+19 294.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 128.06E, 17.86N). ====================================================================================== Plate # 40 =RI: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -6.19E+24 4.93E+24 7.92E+24 1.120E+25 141.49 45.04 ------------------------------------------------------------------------------------- Basal-Strength: -6.19E+24 4.93E+24 7.92E+24 1.120E+25 141.49 45.04 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 6.25E+24 -5.07E+24 -8.28E+24 1.155E+25 -39.07 -45.79 Continuum-Link [PLUG]: -4.25E+17 -1.50E+17 -4.91E+17 6.668E+17 -160.53 -47.46 ------------------------------------------------------------------------------------- Side-Strength: 6.25E+24 -5.07E+24 -8.28E+24 1.155E+25 -39.07 -45.79 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -6.03E+22 1.48E+23 3.54E+23 3.886E+23 112.16 65.68 Side-Strength: 6.25E+24 -5.07E+24 -8.28E+24 1.155E+25 -39.07 -45.79 Basal-Strength: -6.19E+24 4.93E+24 7.92E+24 1.120E+25 141.49 45.04 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.29E+07 -9.82E+07 5.29E+07 1.195E+08 -113.59 26.27 Suggested viewpoint for orthographic projection of torques on this plate is: (-108.41E, 18.95N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 5.74E+16 -1.35E+16 1.54E+16 6.100E+16 74.5 Side-strength: -1.42E+18 6.94E+16 -1.12E+18 1.812E+18 229.3 Basal-strength: 1.37E+18 -5.59E+16 1.10E+18 1.757E+18 48.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-106.85E, 19.42N). ====================================================================================== Plate # 41 =SA: 1670 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.13E+26 1.45E+26 -2.13E+26 2.818E+26 51.90 -49.25 Velocity-Boundary-C.'s -2.24E+23 1.15E+25 1.77E+25 2.109E+25 91.11 56.90 ------------------------------------------------------------------------------------- Basal-Strength: 1.13E+26 1.56E+26 -1.96E+26 2.749E+26 54.06 -45.41 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -4.98E+25 -1.23E+26 1.81E+26 2.245E+26 -112.02 53.72 Continuum-Link [PLUG]: -6.84E+25 -5.37E+25 1.00E+25 8.750E+25 -141.86 6.59 ------------------------------------------------------------------------------------- Side-Strength: -1.18E+26 -1.77E+26 1.91E+26 2.859E+26 -123.75 41.93 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.91E+24 2.06E+25 4.78E+24 2.169E+25 76.58 12.73 Side-Strength: -1.18E+26 -1.77E+26 1.91E+26 2.859E+26 -123.75 41.93 Basal-Strength: 1.13E+26 1.56E+26 -1.96E+26 2.749E+26 54.06 -45.41 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 9.85E+05 1.29E+05 -1.13E+06 1.502E+06 7.44 -48.59 Suggested viewpoint for orthographic projection of torques on this plate is: ( -17.47E, 17.34N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.18E+18 4.53E+17 -3.16E+18 3.404E+18 166.7 Side-strength: 3.17E+17 3.28E+19 3.06E+19 4.487E+19 44.4 Basal-strength: -1.49E+18 -3.33E+19 -2.74E+19 4.315E+19 228.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -55.68E, -25.40N). ====================================================================================== Plate # 42 =SB: 17 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -6.55E+24 -1.19E+25 6.91E+24 1.521E+25 -118.88 27.00 Velocity-Boundary-C.'s 1.22E+19 3.26E+19 3.62E+19 5.018E+19 69.50 46.12 ------------------------------------------------------------------------------------- Basal-Strength: -6.55E+24 -1.19E+25 6.91E+24 1.521E+25 -118.88 27.00 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.07E+25 1.80E+25 -1.08E+25 2.355E+25 59.28 -27.32 Continuum-Link [PLUG]: 8.52E+17 1.73E+18 1.13E+16 1.925E+18 63.73 0.34 ------------------------------------------------------------------------------------- Side-Strength: 1.07E+25 1.80E+25 -1.08E+25 2.355E+25 59.28 -27.32 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.14E+24 -6.12E+24 3.90E+24 8.351E+24 -124.09 27.83 Side-Strength: 1.07E+25 1.80E+25 -1.08E+25 2.355E+25 59.28 -27.32 Basal-Strength: -6.55E+24 -1.19E+25 6.91E+24 1.521E+25 -118.88 27.00 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.75E+08 -1.75E+08 3.22E+07 3.272E+08 -32.43 5.65 Suggested viewpoint for orthographic projection of torques on this plate is: (-142.83E,-60.86N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.02E+18 -8.05E+17 -1.81E+17 1.311E+18 106.5 Side-strength: -2.96E+18 2.12E+18 6.02E+17 3.696E+18 289.5 Basal-strength: 1.95E+18 -1.32E+18 -4.21E+17 2.388E+18 111.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.32E, -4.97N). ====================================================================================== Plate # 43 =SC: 58 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.39E+25 -1.28E+25 1.46E+25 2.391E+25 -42.74 37.64 Velocity-Boundary-C.'s -2.12E+18 2.03E+18 -2.60E+18 3.922E+18 136.23 -41.58 ------------------------------------------------------------------------------------- Basal-Strength: 1.39E+25 -1.28E+25 1.46E+25 2.391E+25 -42.74 37.64 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.68E+24 1.33E+25 -1.09E+25 1.881E+25 120.10 -35.47 Continuum-Link [PLUG]: 2.24E+18 -2.95E+18 1.46E+18 3.980E+18 -52.75 21.47 ------------------------------------------------------------------------------------- Side-Strength: -7.68E+24 1.33E+25 -1.09E+25 1.881E+25 120.10 -35.47 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -6.22E+24 -4.05E+23 -3.69E+24 7.243E+24 -176.28 -30.59 Side-Strength: -7.68E+24 1.33E+25 -1.09E+25 1.881E+25 120.10 -35.47 Basal-Strength: 1.39E+25 -1.28E+25 1.46E+25 2.391E+25 -42.74 37.64 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.75E+06 4.91E+06 1.36E+07 1.496E+07 127.40 65.59 Suggested viewpoint for orthographic projection of torques on this plate is: ( -36.62E,-52.20N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.61E+17 -1.06E+18 3.88E+17 1.137E+18 303.9 Side-strength: -2.27E+18 -1.80E+18 -5.82E+17 2.953E+18 251.2 Basal-strength: 2.43E+18 2.85E+18 1.94E+17 3.753E+18 85.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -51.21E, -57.35N). ====================================================================================== Plate # 44 =SL: 6 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.92E+24 -1.66E+24 -5.17E+23 5.218E+24 -161.32 -5.69 Velocity-Boundary-C.'s 4.90E+16 -3.24E+16 2.25E+16 6.294E+16 -33.46 20.98 ------------------------------------------------------------------------------------- Basal-Strength: -4.92E+24 -1.66E+24 -5.17E+23 5.218E+24 -161.32 -5.69 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 6.92E+24 1.38E+24 1.19E+24 7.160E+24 11.26 9.60 Continuum-Link [PLUG]: 5.45E+16 6.70E+16 -1.61E+16 8.790E+16 50.87 -10.58 ------------------------------------------------------------------------------------- Side-Strength: 6.92E+24 1.38E+24 1.19E+24 7.160E+24 11.26 9.60 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -2.01E+24 2.85E+23 -6.76E+23 2.135E+24 171.91 -18.47 Side-Strength: 6.92E+24 1.38E+24 1.19E+24 7.160E+24 11.26 9.60 Basal-Strength: -4.92E+24 -1.66E+24 -5.17E+23 5.218E+24 -161.32 -5.69 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -9.23E+07 1.31E+08 2.93E+08 3.344E+08 125.16 61.35 Suggested viewpoint for orthographic projection of torques on this plate is: ( -60.94E,-61.05N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -8.41E+16 -3.00E+17 1.23E+17 3.352E+17 319.1 Side-strength: -1.10E+17 9.95E+17 -5.11E+17 1.124E+18 159.9 Basal-strength: 1.94E+17 -6.95E+17 3.88E+17 8.190E+17 348.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -59.13E, -61.92N). ====================================================================================== Plate # 45 =SO: 441 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.48E+25 -6.37E+25 -7.91E+25 1.073E+26 -118.68 -47.44 Velocity-Boundary-C.'s 1.30E+19 -2.92E+19 -1.05E+19 3.362E+19 -65.94 -18.15 ------------------------------------------------------------------------------------- Basal-Strength: -3.48E+25 -6.37E+25 -7.91E+25 1.073E+26 -118.68 -47.44 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.45E+25 1.66E+25 -1.07E+25 2.451E+25 48.97 -25.79 Continuum-Link [PLUG]: 3.77E+25 3.43E+25 6.80E+25 8.499E+25 42.30 53.11 ------------------------------------------------------------------------------------- Side-Strength: 5.22E+25 5.10E+25 5.73E+25 9.279E+25 44.31 38.14 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.74E+25 1.27E+25 2.17E+25 3.060E+25 143.84 45.28 Side-Strength: 5.22E+25 5.10E+25 5.73E+25 9.279E+25 44.31 38.14 Basal-Strength: -3.48E+25 -6.37E+25 -7.91E+25 1.073E+26 -118.68 -47.44 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.40E+06 -4.08E+06 3.67E+05 5.322E+06 -129.79 3.96 Suggested viewpoint for orthographic projection of torques on this plate is: ( 100.12E,-35.59N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -3.89E+18 -2.07E+18 -1.90E+18 4.802E+18 119.1 Side-strength: -1.19E+19 3.49E+18 7.71E+18 1.457E+19 49.4 Basal-strength: 1.58E+19 -1.41E+18 -5.81E+18 1.685E+19 244.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 48.22E, -14.19N). ====================================================================================== Plate # 46 =SS: 9 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -6.97E+24 -1.29E+25 4.42E+24 1.533E+25 -118.33 16.77 ------------------------------------------------------------------------------------- Basal-Strength: -6.97E+24 -1.29E+25 4.42E+24 1.533E+25 -118.33 16.77 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.26E+24 7.66E+24 -4.78E+24 9.986E+24 60.89 -28.63 Continuum-Link [PLUG]: 4.11E+16 -3.33E+17 4.15E+17 5.335E+17 -82.97 51.04 ------------------------------------------------------------------------------------- Side-Strength: 4.26E+24 7.66E+24 -4.78E+24 9.986E+24 60.89 -28.63 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.70E+24 5.26E+24 3.59E+23 5.928E+24 62.82 3.48 Side-Strength: 4.26E+24 7.66E+24 -4.78E+24 9.986E+24 60.89 -28.63 Basal-Strength: -6.97E+24 -1.29E+25 4.42E+24 1.533E+25 -118.33 16.77 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.26E+08 -2.94E+08 8.31E+07 6.084E+08 -29.20 7.85 Suggested viewpoint for orthographic projection of torques on this plate is: ( 152.62E, -3.17N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -7.16E+16 -2.65E+16 9.27E+17 9.304E+17 3.5 Side-strength: 2.78E+17 7.03E+17 1.37E+18 1.567E+18 331.3 Basal-strength: -2.07E+17 -6.76E+17 -2.30E+18 2.407E+18 163.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 152.11E, -7.29N). ====================================================================================== Plate # 47 =SU: 599 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.22E+25 -2.98E+25 1.30E+26 1.340E+26 -67.81 76.10 Velocity-Boundary-C.'s 3.92E+24 -2.84E+23 -9.23E+23 4.039E+24 -4.15 -13.21 ------------------------------------------------------------------------------------- Basal-Strength: 1.61E+25 -3.01E+25 1.29E+26 1.336E+26 -61.88 75.20 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 8.09E+25 4.80E+25 -8.95E+25 1.298E+26 30.71 -43.57 Continuum-Link [PLUG]: -5.40E+25 1.94E+22 -4.57E+25 7.072E+25 179.98 -40.22 ------------------------------------------------------------------------------------- Side-Strength: 2.69E+25 4.81E+25 -1.35E+26 1.459E+26 60.77 -67.83 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.30E+25 -1.80E+25 6.00E+24 4.696E+25 -157.30 7.34 Side-Strength: 2.69E+25 4.81E+25 -1.35E+26 1.459E+26 60.77 -67.83 Basal-Strength: 1.61E+25 -3.01E+25 1.29E+26 1.336E+26 -61.88 75.20 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 4.41E+06 -1.11E+07 1.48E+06 1.201E+07 -68.31 7.06 Suggested viewpoint for orthographic projection of torques on this plate is: ( 110.76E, 14.68N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.57E+18 1.39E+18 -7.07E+18 7.371E+18 172.4 Side-strength: 2.11E+19 6.21E+18 6.41E+18 2.291E+19 286.8 Basal-strength: -1.95E+19 -7.59E+18 6.63E+17 2.097E+19 88.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 119.63E, 8.40N). ====================================================================================== Plate # 48 =SW: 10 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 7.81E+24 -1.99E+24 4.98E+24 9.470E+24 -14.31 31.73 Velocity-Boundary-C.'s -1.34E+18 -1.41E+18 -2.95E+17 1.963E+18 -133.54 -8.64 ------------------------------------------------------------------------------------- Basal-Strength: 7.81E+24 -1.99E+24 4.98E+24 9.470E+24 -14.31 31.73 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -8.77E+24 4.22E+24 -6.10E+24 1.149E+25 154.31 -32.09 Continuum-Link [PLUG]: 1.09E+17 1.11E+17 6.91E+16 1.698E+17 45.56 24.02 ------------------------------------------------------------------------------------- Side-Strength: -8.77E+24 4.22E+24 -6.10E+24 1.149E+25 154.31 -32.09 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 9.67E+23 -2.23E+24 1.12E+24 2.678E+24 -66.56 24.83 Side-Strength: -8.77E+24 4.22E+24 -6.10E+24 1.149E+25 154.31 -32.09 Basal-Strength: 7.81E+24 -1.99E+24 4.98E+24 9.470E+24 -14.31 31.73 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -9.68E+06 6.80E+06 3.38E+07 3.581E+07 144.88 70.71 Suggested viewpoint for orthographic projection of torques on this plate is: ( -24.08E,-57.90N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.35E+17 2.14E+17 1.37E+17 4.203E+17 52.2 Side-strength: -7.69E+17 -1.63E+18 -2.29E+16 1.804E+18 268.6 Basal-strength: 4.34E+17 1.42E+18 -1.14E+17 1.486E+18 98.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -27.46E, -57.82N). ====================================================================================== Plate # 49 =TI: 19 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.23E+25 1.10E+25 -2.72E+25 3.682E+25 26.21 -47.62 Velocity-Boundary-C.'s -1.43E+18 -1.31E+18 -1.25E+18 2.307E+18 -137.55 -32.92 ------------------------------------------------------------------------------------- Basal-Strength: 2.23E+25 1.10E+25 -2.72E+25 3.682E+25 26.21 -47.62 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.43E+25 -1.25E+25 2.73E+25 3.865E+25 -152.84 45.03 Continuum-Link [PLUG]: 6.04E+17 1.88E+17 1.30E+18 1.444E+18 17.34 64.03 ------------------------------------------------------------------------------------- Side-Strength: -2.43E+25 -1.25E+25 2.73E+25 3.865E+25 -152.84 45.03 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.03E+24 1.51E+24 -1.42E+23 2.535E+24 36.51 -3.21 Side-Strength: -2.43E+25 -1.25E+25 2.73E+25 3.865E+25 -152.84 45.03 Basal-Strength: 2.23E+25 1.10E+25 -2.72E+25 3.682E+25 26.21 -47.62 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.00E+07 4.46E+06 -1.18E+07 1.613E+07 24.02 -47.18 Suggested viewpoint for orthographic projection of torques on this plate is: ( 127.06E, -9.75N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.25E+16 6.73E+16 3.91E+17 3.978E+17 356.7 Side-strength: -3.04E+18 -3.20E+18 -4.16E+18 6.066E+18 134.1 Basal-strength: 3.07E+18 3.13E+18 3.77E+18 5.780E+18 311.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 125.91E, -8.81N). ====================================================================================== Plate # 50 =TO: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -5.14E+23 -7.02E+22 3.17E+24 3.214E+24 -172.23 80.70 Velocity-Boundary-C.'s -2.47E+16 -1.58E+17 1.13E+17 1.960E+17 -98.87 35.22 ------------------------------------------------------------------------------------- Basal-Strength: -5.14E+23 -7.02E+22 3.17E+24 3.214E+24 -172.23 80.70 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.83E+24 4.65E+24 -1.30E+25 1.432E+25 50.52 -65.11 Continuum-Link [PLUG]: 2.62E+17 -2.49E+17 -6.80E+17 7.701E+17 -43.47 -62.00 ------------------------------------------------------------------------------------- Side-Strength: 3.83E+24 4.65E+24 -1.30E+25 1.432E+25 50.52 -65.11 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.32E+24 -4.58E+24 9.82E+24 1.133E+25 -125.91 60.06 Side-Strength: 3.83E+24 4.65E+24 -1.30E+25 1.432E+25 50.52 -65.11 Basal-Strength: -5.14E+23 -7.02E+22 3.17E+24 3.214E+24 -172.23 80.70 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.42E+08 1.37E+07 5.27E+07 1.519E+08 5.52 20.29 Suggested viewpoint for orthographic projection of torques on this plate is: ( 158.43E, -8.12N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -4.60E+17 -1.49E+18 -8.52E+17 1.779E+18 118.9 Side-strength: 6.39E+17 1.96E+18 8.91E+17 2.248E+18 293.6 Basal-strength: -1.80E+17 -4.70E+17 -3.95E+16 5.044E+17 94.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-174.51E, -19.32N). ====================================================================================== Plate # 51 =WL: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 9.27E+24 1.56E+25 -2.36E+25 2.979E+25 59.26 -52.49 Velocity-Boundary-C.'s 1.50E+24 3.23E+24 9.82E+22 3.566E+24 65.05 1.58 ------------------------------------------------------------------------------------- Basal-Strength: 1.08E+25 1.88E+25 -2.35E+25 3.200E+25 60.21 -47.34 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.51E+25 -2.61E+25 2.07E+25 3.661E+25 -120.05 34.44 Continuum-Link [PLUG]: 1.15E+18 -1.93E+17 -7.66E+17 1.396E+18 -9.54 -33.27 ------------------------------------------------------------------------------------- Side-Strength: -1.51E+25 -2.61E+25 2.07E+25 3.661E+25 -120.05 34.44 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.35E+24 7.32E+24 2.82E+24 8.967E+24 59.30 18.36 Side-Strength: -1.51E+25 -2.61E+25 2.07E+25 3.661E+25 -120.05 34.44 Basal-Strength: 1.08E+25 1.88E+25 -2.35E+25 3.200E+25 60.21 -47.34 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.35E+08 9.77E+07 -2.75E+07 1.688E+08 144.06 -9.37 Suggested viewpoint for orthographic projection of torques on this plate is: ( 149.51E, 0.64N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.12E+17 -3.90E+17 1.34E+18 1.407E+18 18.4 Side-strength: -1.70E+18 -2.77E+18 -4.74E+18 5.747E+18 145.6 Basal-strength: 1.91E+18 3.16E+18 3.40E+18 5.023E+18 312.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 147.26E, -6.57N). ====================================================================================== Plate # 52 =YA: 56 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -6.02E+25 3.15E+23 -5.62E+25 8.237E+25 179.70 -43.05 Velocity-Boundary-C.'s 7.13E+18 3.26E+19 -5.36E+19 6.317E+19 77.66 -58.11 ------------------------------------------------------------------------------------- Basal-Strength: -6.02E+25 3.15E+23 -5.62E+25 8.237E+25 179.70 -43.05 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.63E+24 -5.09E+23 1.72E+24 2.419E+24 -17.34 45.15 Continuum-Link [PLUG]: 6.03E+25 2.53E+24 5.22E+25 7.980E+25 2.40 40.83 ------------------------------------------------------------------------------------- Side-Strength: 6.20E+25 2.02E+24 5.39E+25 8.214E+25 1.87 41.00 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.77E+24 -2.33E+24 2.34E+24 3.749E+24 -127.23 38.57 Side-Strength: 6.20E+25 2.02E+24 5.39E+25 8.214E+25 1.87 41.00 Basal-Strength: -6.02E+25 3.15E+23 -5.62E+25 8.237E+25 179.70 -43.05 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.36E+06 -1.30E+07 -1.25E+07 1.808E+07 -84.02 -43.87 Suggested viewpoint for orthographic projection of torques on this plate is: ( 118.49E, 27.27N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -4.54E+17 -2.80E+16 -3.73E+17 5.884E+17 135.5 Side-strength: -6.46E+18 -8.04E+18 7.73E+18 1.289E+19 47.6 Basal-strength: 6.92E+18 8.07E+18 -7.36E+18 1.293E+19 230.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 116.71E, 28.30N). ======================================================================================