Earth5R.feg: = Earth5Q.feg, with reduced Q=0.054 in India, increased Q=0.050 in Earth5R-type4AplusA.bcs: forced slabs(4), w/ exceptions (A); internal(5) set A iEarth5-048.in: FFRIC 0.1, TAUMAX 2.0E12, ICONVE6#2, type-4A slabs "plusA" inter Torque-balance reports for each of 52 plates (FFRIC 0.100, TAUMAX 2.0E+12\2.0E+12): Plate # 1 =AF: 1288 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.52E+25 -4.95E+25 5.40E+25 8.128E+25 -54.59 41.64 Velocity-Boundary-C.'s 1.16E+25 2.32E+25 1.05E+25 2.799E+25 63.40 22.05 ------------------------------------------------------------------------------------- Basal-Strength: 4.68E+25 -2.63E+25 6.45E+25 8.394E+25 -29.34 50.22 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -3.13E+25 6.24E+25 2.50E+25 7.418E+25 116.66 19.72 Continuum-Link [PLUG]: -3.85E+25 -3.33E+25 -6.71E+25 8.428E+25 -139.13 -52.80 ------------------------------------------------------------------------------------- Side-Strength: -6.99E+25 2.91E+25 -4.21E+25 8.659E+25 157.41 -29.09 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.30E+25 -2.75E+24 -2.24E+25 3.227E+25 -6.81 -44.01 Side-Strength: -6.99E+25 2.91E+25 -4.21E+25 8.659E+25 157.41 -29.09 Basal-Strength: 4.68E+25 -2.63E+25 6.45E+25 8.394E+25 -29.34 50.22 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 4.88E+05 -6.72E+04 2.14E+05 5.371E+05 -7.85 23.46 Suggested viewpoint for orthographic projection of torques on this plate is: ( 73.16E, 10.22N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.24E+18 -1.64E+18 3.53E+18 5.065E+18 315.1 Side-strength: 7.03E+18 6.18E+16 -1.16E+19 1.359E+19 209.6 Basal-strength: -1.03E+19 1.58E+18 8.10E+18 1.318E+19 51.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 2.86E, 0.60N). ====================================================================================== Plate # 2 =AM: 134 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.34E+25 -4.25E+25 4.80E+24 4.874E+25 -118.91 5.65 Velocity-Boundary-C.'s 1.07E+25 -3.28E+24 7.61E+24 1.350E+25 -17.12 34.31 ------------------------------------------------------------------------------------- Basal-Strength: -1.28E+25 -4.57E+25 1.24E+25 4.909E+25 -105.62 14.64 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.37E+25 7.36E+25 -3.96E+25 8.468E+25 79.45 -27.91 Continuum-Link [PLUG]: 5.07E+24 -1.45E+25 1.96E+25 2.490E+25 -70.67 52.03 ------------------------------------------------------------------------------------- Side-Strength: 1.88E+25 5.91E+25 -2.00E+25 6.517E+25 72.38 -17.88 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -5.98E+24 -1.34E+25 7.60E+24 1.650E+25 -114.11 27.41 Side-Strength: 1.88E+25 5.91E+25 -2.00E+25 6.517E+25 72.38 -17.88 Basal-Strength: -1.28E+25 -4.57E+25 1.24E+25 4.909E+25 -105.62 14.64 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 6.25E+06 -1.05E+07 -1.14E+07 1.674E+07 -59.28 -43.02 Suggested viewpoint for orthographic projection of torques on this plate is: ( 172.82E,-29.31N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 8.97E+17 -1.49E+18 -1.92E+18 2.590E+18 148.1 Side-strength: -4.20E+18 4.16E+18 8.35E+18 1.023E+19 339.4 Basal-strength: 3.30E+18 -2.67E+18 -6.43E+18 7.705E+18 163.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 127.74E, 46.43N). ====================================================================================== Plate # 3 =AN: 1264 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.50E+25 -7.03E+24 2.97E+25 3.399E+25 -25.09 60.82 Velocity-Boundary-C.'s 6.43E+22 4.49E+23 1.61E+24 1.677E+24 81.85 74.30 ------------------------------------------------------------------------------------- Basal-Strength: 1.51E+25 -6.58E+24 3.13E+25 3.535E+25 -23.57 62.28 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.40E+25 4.68E+25 -2.82E+25 5.638E+25 106.60 -29.98 Continuum-Link [PLUG]: -2.73E+18 9.58E+17 -1.54E+18 3.278E+18 160.69 -27.93 ------------------------------------------------------------------------------------- Side-Strength: -1.40E+25 4.68E+25 -2.82E+25 5.638E+25 106.60 -29.98 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.12E+24 -4.02E+25 -3.13E+24 4.036E+25 -91.59 -4.44 Side-Strength: -1.40E+25 4.68E+25 -2.82E+25 5.638E+25 106.60 -29.98 Basal-Strength: 1.51E+25 -6.58E+24 3.13E+25 3.535E+25 -23.57 62.28 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.88E+04 -4.38E+04 3.38E+05 3.424E+05 -56.65 81.19 Suggested viewpoint for orthographic projection of torques on this plate is: ( 0.54E,-25.62N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.73E+18 -5.18E+17 5.69E+18 6.335E+18 355.1 Side-strength: -3.14E+18 -4.93E+18 -6.64E+18 8.849E+18 213.7 Basal-strength: 4.04E+17 5.45E+18 9.51E+17 5.549E+18 79.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 57.74E, -83.98N). ====================================================================================== Plate # 4 =AP: 85 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.96E+25 -1.83E+25 2.22E+25 3.479E+25 -137.01 39.68 Velocity-Boundary-C.'s -1.69E+25 -9.68E+24 8.71E+24 2.129E+25 -150.13 24.13 ------------------------------------------------------------------------------------- Basal-Strength: -3.64E+25 -2.79E+25 3.09E+25 5.535E+25 -142.52 33.95 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.09E+25 5.56E+24 1.06E+22 1.227E+25 26.91 0.05 Continuum-Link [PLUG]: 9.34E+24 1.32E+25 -2.00E+25 2.573E+25 54.71 -51.06 ------------------------------------------------------------------------------------- Side-Strength: 2.03E+25 1.88E+25 -2.00E+25 3.411E+25 42.76 -35.90 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.62E+25 9.18E+24 -1.09E+25 2.155E+25 29.61 -30.44 Side-Strength: 2.03E+25 1.88E+25 -2.00E+25 3.411E+25 42.76 -35.90 Basal-Strength: -3.64E+25 -2.79E+25 3.09E+25 5.535E+25 -142.52 33.95 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.73E+07 -1.77E+08 -5.10E+07 1.928E+08 -72.04 -15.34 Suggested viewpoint for orthographic projection of torques on this plate is: (-101.77E,-48.36N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.19E+18 2.13E+18 -1.45E+18 3.382E+18 229.7 Side-strength: -4.24E+18 2.81E+18 -1.67E+18 5.354E+18 242.0 Basal-strength: 6.43E+18 -4.93E+18 3.13E+18 8.688E+18 57.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -70.13E, -17.84N). ====================================================================================== Plate # 5 =AR: 188 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 7.13E+25 -8.18E+25 2.90E+25 1.123E+26 -48.92 14.96 Velocity-Boundary-C.'s -4.39E+24 -2.50E+24 5.57E+24 7.517E+24 -150.35 47.79 ------------------------------------------------------------------------------------- Basal-Strength: 6.69E+25 -8.43E+25 3.45E+25 1.130E+26 -51.56 17.80 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.07E+25 7.29E+25 -4.53E+25 9.966E+25 124.84 -27.04 Continuum-Link [PLUG]: -1.28E+25 1.32E+25 -4.40E+24 1.887E+25 134.15 -13.49 ------------------------------------------------------------------------------------- Side-Strength: -6.35E+25 8.60E+25 -4.97E+25 1.179E+26 126.43 -24.93 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.39E+24 -1.76E+24 1.52E+25 1.563E+25 -152.54 75.86 Side-Strength: -6.35E+25 8.60E+25 -4.97E+25 1.179E+26 126.43 -24.93 Basal-Strength: 6.69E+25 -8.43E+25 3.45E+25 1.130E+26 -51.56 17.80 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.31E+06 -3.65E+06 5.82E+05 3.917E+06 -70.26 8.54 Suggested viewpoint for orthographic projection of torques on this plate is: ( 42.91E, 13.65N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.64E+18 1.82E+18 -1.55E+17 2.453E+18 93.7 Side-strength: 8.35E+18 -3.20E+18 -1.62E+19 1.851E+19 205.7 Basal-strength: -6.71E+18 1.38E+18 1.64E+19 1.774E+19 18.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 47.56E, 26.35N). ====================================================================================== Plate # 6 =AS: 415 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.13E+24 1.65E+25 -7.58E+24 1.819E+25 93.93 -24.63 Velocity-Boundary-C.'s 1.02E+24 -9.73E+23 -8.24E+23 1.633E+24 -43.68 -30.33 ------------------------------------------------------------------------------------- Basal-Strength: -1.14E+23 1.55E+25 -8.41E+24 1.766E+25 90.42 -28.43 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.73E+24 -1.47E+25 3.51E+24 1.559E+25 -75.80 13.00 Continuum-Link [PLUG]: -2.59E+24 -7.27E+24 7.30E+24 1.062E+25 -109.59 43.41 ------------------------------------------------------------------------------------- Side-Strength: 1.14E+24 -2.20E+25 1.08E+25 2.453E+25 -87.04 26.13 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.02E+24 6.47E+24 -2.40E+24 6.974E+24 99.00 -20.11 Side-Strength: 1.14E+24 -2.20E+25 1.08E+25 2.453E+25 -87.04 26.13 Basal-Strength: -1.14E+23 1.55E+25 -8.41E+24 1.766E+25 90.42 -28.43 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.80E+07 2.62E+07 2.69E+07 5.338E+07 34.57 30.25 Suggested viewpoint for orthographic projection of torques on this plate is: ( 25.93E, 38.50N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.61E+17 -1.65E+17 -7.70E+17 1.095E+18 206.1 Side-strength: -2.73E+18 1.08E+18 2.49E+18 3.850E+18 34.2 Basal-strength: 1.97E+18 -9.18E+17 -1.72E+18 2.771E+18 217.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 25.46E, 36.81N). ====================================================================================== Plate # 7 =AT: 192 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.29E+25 4.11E+24 -1.70E+25 2.176E+25 17.64 -51.44 Velocity-Boundary-C.'s 5.37E+24 -8.55E+24 9.21E+23 1.014E+25 -57.89 5.21 ------------------------------------------------------------------------------------- Basal-Strength: 1.83E+25 -4.44E+24 -1.61E+25 2.477E+25 -13.66 -40.52 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.71E+25 -1.08E+25 2.70E+25 3.374E+25 -147.77 53.09 Continuum-Link [PLUG]: 5.35E+24 1.98E+24 -8.22E+24 1.001E+25 20.33 -55.22 ------------------------------------------------------------------------------------- Side-Strength: -1.18E+25 -8.82E+24 1.88E+25 2.385E+25 -143.18 51.88 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -6.51E+24 1.33E+25 -2.67E+24 1.502E+25 116.12 -10.24 Side-Strength: -1.18E+25 -8.82E+24 1.88E+25 2.385E+25 -143.18 51.88 Basal-Strength: 1.83E+25 -4.44E+24 -1.61E+25 2.477E+25 -13.66 -40.52 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.76E+07 6.88E+06 7.26E+06 2.023E+07 21.37 21.05 Suggested viewpoint for orthographic projection of torques on this plate is: ( 34.26E, 38.10N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.47E+18 3.58E+17 -1.81E+18 2.357E+18 193.1 Side-strength: -2.16E+18 3.06E+18 8.12E+16 3.743E+18 88.4 Basal-strength: 6.89E+17 -3.41E+18 1.73E+18 3.887E+18 304.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 29.37E, 38.78N). ====================================================================================== Plate # 8 =AU: 999 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s 1.60E+26 -1.19E+25 1.25E+25 1.608E+26 -4.26 4.46 ------------------------------------------------------------------------------------- Basal-Strength: 1.60E+26 -1.19E+25 1.25E+25 1.608E+26 -4.26 4.46 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.45E+24 -2.17E+25 -1.37E+26 1.387E+26 -96.45 -80.93 Continuum-Link [PLUG]: -2.08E+26 6.35E+23 1.20E+26 2.400E+26 179.83 29.92 ------------------------------------------------------------------------------------- Side-Strength: -2.10E+26 -2.11E+25 -1.73E+25 2.122E+26 -174.28 -4.66 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.06E+25 3.30E+25 4.75E+24 6.055E+25 33.12 4.50 Side-Strength: -2.10E+26 -2.11E+25 -1.73E+25 2.122E+26 -174.28 -4.66 Basal-Strength: 1.60E+26 -1.19E+25 1.25E+25 1.608E+26 -4.26 4.46 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.14E+06 -7.62E+05 5.89E+05 1.491E+06 -33.79 23.26 Suggested viewpoint for orthographic projection of torques on this plate is: ( 15.29E,-85.27N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -5.18E+18 7.97E+18 -2.39E+17 9.504E+18 107.8 Side-strength: 3.36E+18 -3.31E+19 -4.55E+17 3.331E+19 260.5 Basal-strength: 1.82E+18 2.52E+19 6.94E+17 2.524E+19 70.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 122.75E, -30.59N). ====================================================================================== Plate # 9 =BH: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.71E+25 1.35E+25 -4.55E+25 5.046E+25 38.31 -64.41 Velocity-Boundary-C.'s 1.23E+24 9.95E+23 1.21E+24 1.992E+24 38.91 37.30 ------------------------------------------------------------------------------------- Basal-Strength: 1.83E+25 1.45E+25 -4.43E+25 5.010E+25 38.35 -62.18 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.94E+25 -1.49E+25 4.51E+25 5.129E+25 -142.37 61.52 Continuum-Link [PLUG]: 3.78E+17 9.77E+17 5.28E+17 1.173E+18 68.85 26.74 ------------------------------------------------------------------------------------- Side-Strength: -1.94E+25 -1.49E+25 4.51E+25 5.129E+25 -142.37 61.52 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.03E+24 4.27E+23 -7.81E+23 1.365E+24 22.40 -34.91 Side-Strength: -1.94E+25 -1.49E+25 4.51E+25 5.129E+25 -142.37 61.52 Basal-Strength: 1.83E+25 1.45E+25 -4.43E+25 5.010E+25 38.35 -62.18 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.32E+07 -2.63E+07 -1.24E+07 4.408E+07 -38.37 -16.31 Suggested viewpoint for orthographic projection of torques on this plate is: ( 103.50E, 12.50N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.31E+17 -7.23E+15 1.69E+17 2.142E+17 324.1 Side-strength: -7.23E+18 -9.54E+17 -3.42E+18 8.051E+18 115.8 Basal-strength: 7.09E+18 9.62E+17 3.25E+18 7.863E+18 295.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 132.17E, -1.47N). ====================================================================================== Plate # 10 =BR: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 6.89E+22 -6.25E+23 -2.88E+23 6.921E+23 -83.71 -24.62 Velocity-Boundary-C.'s 2.18E+21 4.63E+22 2.64E+22 5.335E+22 87.31 29.61 ------------------------------------------------------------------------------------- Basal-Strength: 7.11E+22 -5.79E+23 -2.62E+23 6.395E+23 -83.00 -24.18 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.56E+22 9.57E+23 3.52E+23 1.022E+24 94.52 20.13 Continuum-Link [PLUG]: 6.04E+15 -2.26E+15 1.05E+16 1.231E+16 -20.53 58.44 ------------------------------------------------------------------------------------- Side-Strength: -7.56E+22 9.57E+23 3.52E+23 1.022E+24 94.52 20.13 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.54E+21 -3.78E+23 -8.98E+22 3.881E+23 -89.31 -13.38 Side-Strength: -7.56E+22 9.57E+23 3.52E+23 1.022E+24 94.52 20.13 Basal-Strength: 7.11E+22 -5.79E+23 -2.62E+23 6.395E+23 -83.00 -24.18 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.81E+07 -2.46E+06 7.35E+06 2.912E+07 -5.02 14.62 Suggested viewpoint for orthographic projection of torques on this plate is: ( 173.68E,-27.16N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.84E+16 1.28E+16 -5.23E+16 6.091E+16 195.1 Side-strength: -7.39E+16 -5.42E+16 1.32E+17 1.604E+17 22.8 Basal-strength: 4.55E+16 4.15E+16 -7.93E+16 1.004E+17 207.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 176.27E, -15.30N). ====================================================================================== Plate # 11 =BS: 30 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 5.07E+24 1.56E+24 -1.81E+25 1.887E+25 17.08 -73.69 Velocity-Boundary-C.'s -2.18E+24 -1.49E+24 7.90E+23 2.754E+24 -145.70 16.67 ------------------------------------------------------------------------------------- Basal-Strength: 2.89E+24 7.01E+22 -1.73E+25 1.756E+25 1.39 -80.53 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.84E+24 4.56E+24 1.15E+25 1.331E+25 43.29 60.05 Continuum-Link [PLUG]: -2.57E+17 -2.16E+17 -4.61E+18 4.620E+18 -139.89 -85.83 ------------------------------------------------------------------------------------- Side-Strength: 4.84E+24 4.56E+24 1.15E+25 1.331E+25 43.29 60.05 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -7.73E+24 -4.63E+24 5.78E+24 1.070E+25 -149.08 32.71 Side-Strength: 4.84E+24 4.56E+24 1.15E+25 1.331E+25 43.29 60.05 Basal-Strength: 2.89E+24 7.01E+22 -1.73E+25 1.756E+25 1.39 -80.53 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.91E+06 -4.51E+06 -3.45E+06 6.897E+06 -49.10 -30.02 Suggested viewpoint for orthographic projection of torques on this plate is: ( 124.25E, -5.17N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -6.82E+17 -6.18E+17 -1.41E+18 1.680E+18 147.1 Side-strength: -1.55E+18 -9.47E+17 1.03E+18 2.090E+18 60.5 Basal-strength: 2.24E+18 1.56E+18 3.79E+17 2.756E+18 277.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 126.16E, -4.61N). ====================================================================================== Plate # 12 =BU: 28 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.64E+25 1.33E+24 -1.17E+25 3.829E+25 2.09 -17.87 Velocity-Boundary-C.'s -1.97E+24 -2.86E+22 -2.41E+24 3.118E+24 -179.17 -50.71 ------------------------------------------------------------------------------------- Basal-Strength: 3.44E+25 1.30E+24 -1.42E+25 3.726E+25 2.16 -22.33 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.28E+25 -5.78E+23 1.52E+25 2.739E+25 -178.55 33.69 Continuum-Link [PLUG]: -4.47E+24 3.39E+23 -2.39E+24 5.082E+24 175.66 -28.11 ------------------------------------------------------------------------------------- Side-Strength: -2.73E+25 -2.39E+23 1.28E+25 3.011E+25 -179.50 25.15 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -7.19E+24 -1.06E+24 1.36E+24 7.391E+24 -171.61 10.61 Side-Strength: -2.73E+25 -2.39E+23 1.28E+25 3.011E+25 -179.50 25.15 Basal-Strength: 3.44E+25 1.30E+24 -1.42E+25 3.726E+25 2.16 -22.33 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.28E+07 -1.77E+08 -3.29E+07 1.818E+08 -82.66 -10.42 Suggested viewpoint for orthographic projection of torques on this plate is: ( 103.57E,-25.70N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.15E+17 -5.34E+17 -1.02E+18 1.160E+18 168.2 Side-strength: -1.74E+18 -2.28E+18 -3.75E+18 4.726E+18 151.9 Basal-strength: 1.86E+18 2.81E+18 4.78E+18 5.848E+18 335.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 94.11E, 9.26N). ====================================================================================== Plate # 13 =CA: 82 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 5.55E+25 1.52E+25 1.11E+26 1.248E+26 15.31 62.52 Velocity-Boundary-C.'s 2.95E+24 -8.89E+23 1.79E+24 3.562E+24 -16.76 30.10 ------------------------------------------------------------------------------------- Basal-Strength: 5.85E+25 1.43E+25 1.13E+26 1.276E+26 13.76 61.84 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -9.18E+24 4.15E+24 -1.14E+26 1.144E+26 155.68 -84.95 Continuum-Link [PLUG]: 1.84E+18 -2.54E+18 -5.94E+18 6.718E+18 -53.99 -62.16 ------------------------------------------------------------------------------------- Side-Strength: -9.18E+24 4.15E+24 -1.14E+26 1.144E+26 155.68 -84.95 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.93E+25 -1.85E+25 1.46E+24 5.267E+25 -159.46 1.59 Side-Strength: -9.18E+24 4.15E+24 -1.14E+26 1.144E+26 155.68 -84.95 Basal-Strength: 5.85E+25 1.43E+25 1.13E+26 1.276E+26 13.76 61.84 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.29E+07 -6.46E+07 2.42E+07 7.273E+07 -70.48 19.47 Suggested viewpoint for orthographic projection of torques on this plate is: ( -69.56E, -3.56N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.95E+17 -4.01E+17 8.25E+18 8.268E+18 1.6 Side-strength: -1.68E+19 -6.32E+18 1.12E+18 1.796E+19 273.6 Basal-strength: 1.64E+19 6.73E+18 -9.37E+18 2.003E+19 117.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -73.53E, 15.08N). ====================================================================================== Plate # 14 =CL: 42 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -6.23E+24 -1.18E+25 5.88E+25 6.033E+25 -117.90 77.24 ------------------------------------------------------------------------------------- Basal-Strength: -6.23E+24 -1.18E+25 5.88E+25 6.033E+25 -117.90 77.24 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 8.93E+23 4.10E+24 -5.46E+25 5.480E+25 77.70 -85.61 Continuum-Link [PLUG]: 3.96E+18 5.21E+18 1.16E+18 6.643E+18 52.77 10.09 ------------------------------------------------------------------------------------- Side-Strength: 8.93E+23 4.10E+24 -5.46E+25 5.480E+25 77.70 -85.61 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.34E+24 7.67E+24 -4.20E+24 1.025E+25 55.17 -24.20 Side-Strength: 8.93E+23 4.10E+24 -5.46E+25 5.480E+25 77.70 -85.61 Basal-Strength: -6.23E+24 -1.18E+25 5.88E+25 6.033E+25 -117.90 77.24 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -6.98E+06 4.00E+06 6.49E+06 1.033E+07 150.19 38.89 Suggested viewpoint for orthographic projection of torques on this plate is: ( 144.38E, 1.74N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 4.20E+17 5.10E+17 1.47E+18 1.609E+18 335.8 Side-strength: 5.01E+18 6.96E+18 6.04E+17 8.601E+18 274.0 Basal-strength: -5.43E+18 -7.47E+18 -2.07E+18 9.469E+18 102.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 140.66E, 3.27N). ====================================================================================== Plate # 15 =CO: 78 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -2.20E+25 4.72E+24 1.37E+25 2.637E+25 167.90 31.37 ------------------------------------------------------------------------------------- Basal-Strength: -2.20E+25 4.72E+24 1.37E+25 2.637E+25 167.90 31.37 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.22E+25 -6.40E+24 -1.81E+25 3.750E+25 -11.22 -28.77 Continuum-Link [PLUG]: -2.30E+17 -2.22E+15 1.20E+16 2.305E+17 -179.45 2.99 ------------------------------------------------------------------------------------- Side-Strength: 3.22E+25 -6.40E+24 -1.81E+25 3.750E+25 -11.22 -28.77 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.02E+25 1.68E+24 4.33E+24 1.124E+25 170.68 22.64 Side-Strength: 3.22E+25 -6.40E+24 -1.81E+25 3.750E+25 -11.22 -28.77 Basal-Strength: -2.20E+25 4.72E+24 1.37E+25 2.637E+25 167.90 31.37 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -9.41E+05 3.37E+06 2.84E+05 3.506E+06 105.62 4.64 Suggested viewpoint for orthographic projection of torques on this plate is: ( -93.33E, 14.03N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.22E+17 3.51E+17 1.57E+18 1.764E+18 23.4 Side-strength: -2.99E+18 -1.07E+18 -4.96E+18 5.887E+18 209.7 Basal-strength: 2.27E+18 7.16E+17 3.39E+18 4.139E+18 32.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -94.37E, 8.34N). ====================================================================================== Plate # 16 =CR: 11 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -6.51E+22 5.27E+23 3.09E+23 6.148E+23 97.04 30.20 Velocity-Boundary-C.'s -1.33E+22 -7.22E+21 3.50E+22 3.809E+22 -151.52 66.59 ------------------------------------------------------------------------------------- Basal-Strength: -7.84E+22 5.20E+23 3.44E+23 6.287E+23 98.57 33.20 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.95E+22 -3.12E+23 -2.34E+23 3.928E+23 -80.98 -36.57 Continuum-Link [PLUG]: -3.77E+15 1.33E+15 1.62E+16 1.669E+16 160.51 76.15 ------------------------------------------------------------------------------------- Side-Strength: 4.95E+22 -3.12E+23 -2.34E+23 3.928E+23 -80.98 -36.57 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.90E+22 -2.09E+23 -1.10E+23 2.377E+23 -82.09 -27.62 Side-Strength: 4.95E+22 -3.12E+23 -2.34E+23 3.928E+23 -80.98 -36.57 Basal-Strength: -7.84E+22 5.20E+23 3.44E+23 6.287E+23 98.57 33.20 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -5.43E+06 1.04E+06 -1.52E+06 5.739E+06 169.19 -15.40 Suggested viewpoint for orthographic projection of torques on this plate is: (-174.76E, -5.07N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.32E+15 1.76E+16 -3.29E+16 3.731E+16 207.7 Side-strength: 9.81E+14 3.71E+16 -4.92E+16 6.165E+16 216.7 Basal-strength: -2.30E+15 -5.47E+16 8.21E+16 9.868E+16 33.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 174.85E, -19.11N). ====================================================================================== Plate # 17 =EA: 11 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.94E+23 7.58E+22 1.93E+22 2.087E+23 158.62 5.29 Velocity-Boundary-C.'s -6.23E+19 -2.38E+19 1.05E+20 1.248E+20 -159.12 57.69 ------------------------------------------------------------------------------------- Basal-Strength: -1.94E+23 7.57E+22 1.94E+22 2.088E+23 158.63 5.32 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.97E+23 -1.63E+23 -1.14E+23 5.354E+23 -18.19 -12.34 Continuum-Link [PLUG]: 3.20E+16 -5.82E+16 -7.59E+15 6.691E+16 -61.18 -6.51 ------------------------------------------------------------------------------------- Side-Strength: 4.97E+23 -1.63E+23 -1.14E+23 5.354E+23 -18.19 -12.34 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.03E+23 8.75E+22 9.50E+22 3.297E+23 163.90 16.76 Side-Strength: 4.97E+23 -1.63E+23 -1.14E+23 5.354E+23 -18.19 -12.34 Basal-Strength: -1.94E+23 7.57E+22 1.94E+22 2.088E+23 158.63 5.32 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.58E+05 -5.51E+05 -2.93E+05 7.736E+05 -129.75 -22.22 Suggested viewpoint for orthographic projection of torques on this plate is: (-113.72E,-23.78N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 6.96E+15 -2.47E+16 4.49E+16 5.174E+16 18.4 Side-strength: -4.71E+15 3.81E+16 -7.48E+16 8.403E+16 193.5 Basal-strength: -2.25E+15 -1.34E+16 2.98E+16 3.277E+16 5.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-113.85E, -24.61N). ====================================================================================== Plate # 18 =EU: 2108 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.25E+26 1.56E+26 2.81E+25 2.756E+26 145.20 5.86 Velocity-Boundary-C.'s -2.32E+25 4.49E+24 -1.34E+25 2.721E+25 169.06 -29.55 ------------------------------------------------------------------------------------- Basal-Strength: -2.48E+26 1.61E+26 1.47E+25 2.963E+26 147.05 2.84 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.64E+26 -1.81E+26 3.91E+24 2.440E+26 -47.79 0.92 Continuum-Link [PLUG]: 3.87E+25 3.30E+24 -3.07E+25 4.953E+25 4.87 -38.30 ------------------------------------------------------------------------------------- Side-Strength: 2.03E+26 -1.77E+26 -2.68E+25 2.707E+26 -41.20 -5.68 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.58E+25 1.64E+25 1.21E+25 5.010E+25 19.77 13.97 Side-Strength: 2.03E+26 -1.77E+26 -2.68E+25 2.707E+26 -41.20 -5.68 Basal-Strength: -2.48E+26 1.61E+26 1.47E+25 2.963E+26 147.05 2.84 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -9.24E+05 7.16E+05 1.47E+05 1.178E+06 142.23 7.18 Suggested viewpoint for orthographic projection of torques on this plate is: (-114.88E, 70.51N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.01E+18 -7.04E+18 -1.81E+18 7.864E+18 133.7 Side-strength: -2.75E+19 -2.94E+19 -1.35E+19 4.248E+19 197.3 Basal-strength: 2.45E+19 3.64E+19 1.53E+19 4.651E+19 8.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 60.26E, 48.94N). ====================================================================================== Plate # 19 =FT: 4 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.39E+23 3.15E+23 4.74E+23 5.856E+23 113.87 54.02 Velocity-Boundary-C.'s -1.70E+21 1.97E+21 5.33E+21 5.933E+21 130.87 63.98 ------------------------------------------------------------------------------------- Basal-Strength: -1.41E+23 3.17E+23 4.79E+23 5.914E+23 114.00 54.13 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.28E+23 -2.29E+23 -4.38E+23 5.105E+23 -60.88 -59.04 Continuum-Link [PLUG]: 1.75E+15 2.27E+16 -1.28E+16 2.608E+16 85.59 -29.30 ------------------------------------------------------------------------------------- Side-Strength: 1.28E+23 -2.29E+23 -4.38E+23 5.105E+23 -60.88 -59.04 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.31E+22 -8.71E+22 -4.14E+22 9.733E+22 -81.43 -25.19 Side-Strength: 1.28E+23 -2.29E+23 -4.38E+23 5.105E+23 -60.88 -59.04 Basal-Strength: -1.41E+23 3.17E+23 4.79E+23 5.914E+23 114.00 54.13 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.59E+07 4.49E+04 -7.45E+06 3.668E+07 179.93 -11.72 Suggested viewpoint for orthographic projection of torques on this plate is: (-179.10E,-15.84N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.63E+15 6.82E+15 -1.32E+16 1.528E+16 206.3 Side-strength: 8.79E+15 7.16E+16 -3.49E+16 8.013E+16 243.0 Basal-strength: -1.24E+16 -7.84E+16 4.81E+16 9.282E+16 57.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-177.89E, -14.96N). ====================================================================================== Plate # 20 =GP: 5 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.13E+23 1.87E+22 -1.04E+23 1.550E+23 170.66 -42.13 Velocity-Boundary-C.'s 8.12E+21 -1.66E+21 3.65E+21 9.053E+21 -11.58 23.78 ------------------------------------------------------------------------------------- Basal-Strength: -1.05E+23 1.70E+22 -1.00E+23 1.464E+23 170.83 -43.25 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.85E+23 -3.74E+22 -8.93E+21 1.891E+23 -11.41 -2.71 Continuum-Link [PLUG]: 2.45E+16 -4.86E+15 5.37E+16 5.919E+16 -11.21 65.02 ------------------------------------------------------------------------------------- Side-Strength: 1.85E+23 -3.74E+22 -8.93E+21 1.891E+23 -11.41 -2.71 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -7.99E+22 2.04E+22 1.09E+23 1.368E+23 165.68 52.97 Side-Strength: 1.85E+23 -3.74E+22 -8.93E+21 1.891E+23 -11.41 -2.71 Basal-Strength: -1.05E+23 1.70E+22 -1.00E+23 1.464E+23 170.83 -43.25 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -6.62E+07 -3.13E+08 9.08E+06 3.202E+08 -101.94 1.63 Suggested viewpoint for orthographic projection of torques on this plate is: (-101.31E, 2.27N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.69E+16 -2.86E+15 1.29E+16 2.148E+16 53.0 Side-strength: -1.61E+15 -8.77E+14 -2.96E+16 2.968E+16 182.7 Basal-strength: -1.53E+16 3.74E+15 1.67E+16 2.298E+16 316.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-101.67E, 1.90N). ====================================================================================== Plate # 21 =IN: 312 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.02E+23 -1.42E+23 6.47E+23 7.282E+23 -25.21 62.67 Velocity-Boundary-C.'s -1.09E+26 -2.38E+25 1.21E+26 1.649E+26 -167.69 47.46 ------------------------------------------------------------------------------------- Basal-Strength: -1.09E+26 -2.39E+25 1.22E+26 1.652E+26 -167.58 47.68 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -6.59E+25 1.72E+25 6.53E+23 6.808E+25 165.33 0.55 Continuum-Link [PLUG]: 2.14E+26 -1.78E+23 -1.20E+26 2.454E+26 -0.05 -29.20 ------------------------------------------------------------------------------------- Side-Strength: 1.48E+26 1.71E+25 -1.19E+26 1.910E+26 6.56 -38.56 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.98E+25 6.86E+24 -3.07E+24 4.046E+25 170.21 -4.36 Side-Strength: 1.48E+26 1.71E+25 -1.19E+26 1.910E+26 6.56 -38.56 Basal-Strength: -1.09E+26 -2.39E+25 1.22E+26 1.652E+26 -167.58 47.68 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -2.42E+06 -4.52E+06 6.07E+05 5.161E+06 -118.15 6.76 Suggested viewpoint for orthographic projection of torques on this plate is: ( 81.62E, 17.92N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.85E+17 1.85E+18 -6.02E+18 6.350E+18 184.6 Side-strength: 1.84E+19 -9.76E+18 2.16E+19 2.998E+19 319.1 Basal-strength: -1.92E+19 7.90E+18 -1.55E+19 2.593E+19 129.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 78.65E, 14.95N). ====================================================================================== Plate # 22 =JF: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s 7.17E+24 7.78E+24 9.85E+24 1.445E+25 47.35 42.96 ------------------------------------------------------------------------------------- Basal-Strength: 7.17E+24 7.78E+24 9.85E+24 1.445E+25 47.35 42.96 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.10E+24 -6.89E+24 -9.20E+24 1.351E+25 -135.88 -42.91 Continuum-Link [PLUG]: 2.45E+17 -3.05E+16 7.85E+16 2.587E+17 -7.12 17.66 ------------------------------------------------------------------------------------- Side-Strength: -7.10E+24 -6.89E+24 -9.20E+24 1.351E+25 -135.88 -42.91 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -6.52E+22 -8.92E+23 -6.56E+23 1.109E+24 -94.18 -36.25 Side-Strength: -7.10E+24 -6.89E+24 -9.20E+24 1.351E+25 -135.88 -42.91 Basal-Strength: 7.17E+24 7.78E+24 9.85E+24 1.445E+25 47.35 42.96 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 4.29E+07 5.50E+07 -5.84E+07 9.096E+07 52.04 -39.91 Suggested viewpoint for orthographic projection of torques on this plate is: (-132.25E, 47.03N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.54E+17 5.47E+16 -5.90E+16 1.741E+17 240.2 Side-strength: -1.52E+18 1.48E+18 6.69E+16 2.120E+18 272.7 Basal-strength: 1.67E+18 -1.53E+18 -7.85E+15 2.269E+18 90.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-127.50E, 45.49N). ====================================================================================== Plate # 23 =JZ: 8 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -9.59E+23 2.52E+23 1.79E+23 1.007E+24 165.28 10.22 Velocity-Boundary-C.'s 5.54E+21 -2.16E+21 4.18E+20 5.958E+21 -21.31 4.02 ------------------------------------------------------------------------------------- Basal-Strength: -9.53E+23 2.50E+23 1.79E+23 1.002E+24 165.32 10.30 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 8.84E+23 -1.59E+23 -2.71E+23 9.385E+23 -10.17 -16.81 Continuum-Link [PLUG]: 4.67E+16 -1.98E+14 -2.88E+16 5.487E+16 -0.24 -31.66 ------------------------------------------------------------------------------------- Side-Strength: 8.84E+23 -1.59E+23 -2.71E+23 9.385E+23 -10.17 -16.81 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.90E+22 -9.10E+22 9.22E+22 1.468E+23 -52.83 38.91 Side-Strength: 8.84E+23 -1.59E+23 -2.71E+23 9.385E+23 -10.17 -16.81 Basal-Strength: -9.53E+23 2.50E+23 1.79E+23 1.002E+24 165.32 10.30 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.02E+07 3.10E+07 2.19E+07 3.931E+07 71.87 33.83 Suggested viewpoint for orthographic projection of torques on this plate is: (-111.42E,-32.84N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.91E+16 1.43E+15 -1.29E+16 2.305E+16 131.6 Side-strength: -1.98E+16 8.83E+16 -1.16E+17 1.473E+17 200.1 Basal-strength: 7.40E+14 -8.98E+16 1.29E+17 1.572E+17 12.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-110.92E, -33.34N). ====================================================================================== Plate # 24 =KE: 33 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.41E+24 -3.52E+24 7.76E+24 9.597E+24 -141.45 53.98 Velocity-Boundary-C.'s -2.83E+22 -5.71E+22 2.72E+22 6.926E+22 -116.36 23.13 ------------------------------------------------------------------------------------- Basal-Strength: -4.44E+24 -3.57E+24 7.79E+24 9.653E+24 -141.18 53.80 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.39E+25 7.25E+24 -2.31E+25 2.790E+25 27.46 -55.72 Continuum-Link [PLUG]: 5.39E+17 9.09E+16 -9.72E+17 1.116E+18 9.57 -60.64 ------------------------------------------------------------------------------------- Side-Strength: 1.39E+25 7.25E+24 -2.31E+25 2.790E+25 27.46 -55.72 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -9.50E+24 -3.67E+24 1.53E+25 1.835E+25 -158.87 56.29 Side-Strength: 1.39E+25 7.25E+24 -2.31E+25 2.790E+25 27.46 -55.72 Basal-Strength: -4.44E+24 -3.57E+24 7.79E+24 9.653E+24 -141.18 53.80 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.17E+07 -9.43E+05 1.09E+07 1.595E+07 -4.63 42.86 Suggested viewpoint for orthographic projection of torques on this plate is: (-166.57E,-33.47N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.82E+17 -2.77E+18 -1.79E+17 2.880E+18 94.3 Side-strength: -1.33E+18 4.14E+18 4.99E+17 4.379E+18 277.8 Basal-strength: 5.46E+17 -1.38E+18 -3.20E+17 1.515E+18 104.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-179.62E, -33.55N). ====================================================================================== Plate # 25 =MA: 27 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.81E+24 -4.56E+24 1.62E+25 1.706E+25 -58.37 71.70 Velocity-Boundary-C.'s -8.94E+20 -2.77E+21 2.37E+21 3.751E+21 -107.89 39.13 ------------------------------------------------------------------------------------- Basal-Strength: 2.81E+24 -4.56E+24 1.62E+25 1.706E+25 -58.39 71.69 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.66E+24 5.34E+24 -2.39E+25 2.512E+25 136.66 -71.96 Continuum-Link [PLUG]: 1.47E+17 -3.74E+16 6.15E+17 6.330E+17 -14.32 76.18 ------------------------------------------------------------------------------------- Side-Strength: -5.66E+24 5.34E+24 -2.39E+25 2.512E+25 136.66 -71.96 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.85E+24 -7.74E+23 7.69E+24 8.232E+24 -15.21 69.00 Side-Strength: -5.66E+24 5.34E+24 -2.39E+25 2.512E+25 136.66 -71.96 Basal-Strength: 2.81E+24 -4.56E+24 1.62E+25 1.706E+25 -58.39 71.69 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -2.39E+07 1.54E+07 1.59E+07 3.256E+07 147.10 29.16 Suggested viewpoint for orthographic projection of torques on this plate is: ( 132.58E, 18.00N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -8.82E+17 -9.14E+17 2.35E+17 1.292E+18 79.0 Side-strength: 2.88E+18 2.69E+18 -8.25E+16 3.942E+18 268.7 Basal-strength: -2.00E+18 -1.77E+18 -1.52E+17 2.678E+18 93.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 145.30E, 17.93N). ====================================================================================== Plate # 26 =MN: 4 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.12E+23 3.59E+23 -1.15E+23 4.323E+23 59.51 -15.36 Velocity-Boundary-C.'s 2.81E+22 4.65E+22 -2.66E+22 6.045E+22 58.83 -26.07 ------------------------------------------------------------------------------------- Basal-Strength: 2.40E+23 4.06E+23 -1.41E+23 4.919E+23 59.43 -16.67 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.05E+23 -3.74E+23 -8.96E+22 4.354E+23 -118.69 -11.88 Continuum-Link [PLUG]: 9.12E+15 3.42E+16 -3.37E+16 4.890E+16 75.08 -43.61 ------------------------------------------------------------------------------------- Side-Strength: -2.05E+23 -3.74E+23 -8.96E+22 4.354E+23 -118.69 -11.88 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.51E+22 -3.20E+22 2.31E+23 2.356E+23 -137.62 78.37 Side-Strength: -2.05E+23 -3.74E+23 -8.96E+22 4.354E+23 -118.69 -11.88 Basal-Strength: 2.40E+23 4.06E+23 -1.41E+23 4.919E+23 59.43 -16.67 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.95E+08 -9.94E+07 1.06E+07 2.193E+08 -26.99 2.78 Suggested viewpoint for orthographic projection of torques on this plate is: ( 150.53E, -3.67N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.75E+16 -3.18E+16 -7.07E+15 3.697E+16 101.0 Side-strength: 1.07E+16 1.02E+16 -6.67E+16 6.834E+16 191.9 Basal-strength: 6.80E+15 2.16E+16 7.38E+16 7.720E+16 343.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 150.49E, -3.55N). ====================================================================================== Plate # 27 =MO: 10 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 6.49E+24 8.14E+24 9.83E+24 1.432E+25 51.45 43.36 Velocity-Boundary-C.'s 5.08E+24 6.39E+24 7.53E+24 1.111E+25 51.49 42.70 ------------------------------------------------------------------------------------- Basal-Strength: 1.16E+25 1.45E+25 1.74E+25 2.543E+25 51.47 43.07 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.77E+25 -2.15E+25 -1.86E+25 3.352E+25 -129.50 -33.65 Continuum-Link [PLUG]: -1.51E+18 -1.93E+18 -2.00E+18 3.164E+18 -128.12 -39.22 ------------------------------------------------------------------------------------- Side-Strength: -1.77E+25 -2.15E+25 -1.86E+25 3.352E+25 -129.50 -33.65 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.18E+24 7.00E+24 1.21E+24 9.418E+24 48.58 7.37 Side-Strength: -1.77E+25 -2.15E+25 -1.86E+25 3.352E+25 -129.50 -33.65 Basal-Strength: 1.16E+25 1.45E+25 1.74E+25 2.543E+25 51.47 43.07 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -2.99E+07 6.15E+07 2.05E+07 7.136E+07 115.91 16.73 Suggested viewpoint for orthographic projection of torques on this plate is: ( 138.12E, -3.58N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.95E+17 -8.04E+16 1.46E+18 1.478E+18 7.4 Side-strength: 2.15E+18 1.99E+18 -4.37E+18 5.262E+18 213.7 Basal-strength: -1.96E+18 -1.91E+18 2.90E+18 3.991E+18 43.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 137.94E, -3.44N). ====================================================================================== Plate # 28 =MS: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 4.20E+24 2.17E+24 -1.72E+24 5.026E+24 27.37 -19.97 Velocity-Boundary-C.'s 1.80E+24 9.89E+23 1.33E+23 2.055E+24 28.85 3.72 ------------------------------------------------------------------------------------- Basal-Strength: 5.99E+24 3.16E+24 -1.58E+24 6.957E+24 27.82 -13.15 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.95E+24 -2.61E+24 4.44E+24 7.867E+24 -156.35 34.37 Continuum-Link [PLUG]: -4.74E+17 -5.01E+17 1.46E+17 7.052E+17 -133.41 11.96 ------------------------------------------------------------------------------------- Side-Strength: -5.95E+24 -2.61E+24 4.44E+24 7.867E+24 -156.35 34.37 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.33E+22 -5.56E+23 -2.86E+24 2.912E+24 -94.45 -78.95 Side-Strength: -5.95E+24 -2.61E+24 4.44E+24 7.867E+24 -156.35 34.37 Basal-Strength: 5.99E+24 3.16E+24 -1.58E+24 6.957E+24 27.82 -13.15 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.87E+07 -8.43E+07 1.48E+06 1.027E+08 -55.14 0.82 Suggested viewpoint for orthographic projection of torques on this plate is: ( 119.98E, -9.15N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.98E+17 2.20E+17 -4.89E+16 4.571E+17 263.8 Side-strength: -5.31E+17 -4.92E+17 -1.00E+18 1.235E+18 145.1 Basal-strength: 1.34E+17 2.72E+17 1.05E+18 1.092E+18 346.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 123.34E, -1.07N). ====================================================================================== Plate # 29 =NA: 1860 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.20E+25 -1.64E+26 -1.18E+26 2.048E+26 -101.04 -35.19 Velocity-Boundary-C.'s -1.61E+25 -5.77E+24 -2.76E+24 1.734E+25 -160.32 -9.15 ------------------------------------------------------------------------------------- Basal-Strength: -4.82E+25 -1.70E+26 -1.21E+26 2.140E+26 -105.82 -34.35 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -6.08E+25 1.31E+26 1.10E+26 1.815E+26 114.84 37.15 Continuum-Link [PLUG]: 4.99E+25 4.47E+25 -1.83E+24 6.698E+25 41.88 -1.57 ------------------------------------------------------------------------------------- Side-Strength: -1.09E+25 1.76E+26 1.08E+26 2.066E+26 93.55 31.44 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.91E+25 -5.93E+24 1.30E+25 6.077E+25 -5.74 12.34 Side-Strength: -1.09E+25 1.76E+26 1.08E+26 2.066E+26 93.55 31.44 Basal-Strength: -4.82E+25 -1.70E+26 -1.21E+26 2.140E+26 -105.82 -34.35 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.29E+05 -4.85E+05 -4.97E+05 7.062E+05 -104.92 -44.69 Suggested viewpoint for orthographic projection of torques on this plate is: (-114.20E, 55.37N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.91E+17 -8.10E+18 -5.02E+18 9.538E+18 157.9 Side-strength: 3.15E+19 -2.53E+18 7.32E+18 3.243E+19 66.6 Basal-strength: -3.18E+19 1.06E+19 -2.30E+18 3.359E+19 263.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-104.07E, 53.48N). ====================================================================================== Plate # 30 =NB: 21 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.23E+25 2.10E+25 -2.62E+25 3.578E+25 59.78 -47.11 Velocity-Boundary-C.'s 1.93E+25 3.59E+25 -1.55E+25 4.357E+25 61.74 -20.86 ------------------------------------------------------------------------------------- Basal-Strength: 3.15E+25 5.69E+25 -4.17E+25 7.730E+25 61.01 -32.68 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.97E+25 -5.32E+25 4.30E+25 7.457E+25 -119.18 35.23 Continuum-Link [PLUG]: -2.26E+18 -2.36E+18 2.08E+18 3.871E+18 -133.82 32.44 ------------------------------------------------------------------------------------- Side-Strength: -2.97E+25 -5.32E+25 4.30E+25 7.457E+25 -119.18 35.23 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.84E+24 -3.72E+24 -1.28E+24 4.348E+24 -116.35 -17.15 Side-Strength: -2.97E+25 -5.32E+25 4.30E+25 7.457E+25 -119.18 35.23 Basal-Strength: 3.15E+25 5.69E+25 -4.17E+25 7.730E+25 61.01 -32.68 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.93E+08 2.72E+08 -3.82E+07 4.790E+08 145.32 -4.57 Suggested viewpoint for orthographic projection of torques on this plate is: ( 152.79E, -2.78N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.20E+17 1.65E+17 -6.51E+17 6.824E+17 197.2 Side-strength: -2.68E+18 -6.22E+18 -9.54E+18 1.170E+19 144.7 Basal-strength: 2.56E+18 6.06E+18 1.02E+19 1.213E+19 327.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.39E, -2.80N). ====================================================================================== Plate # 31 =ND: 37 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -5.63E+24 -4.44E+24 6.73E+23 7.200E+24 -141.75 5.36 Velocity-Boundary-C.'s 1.81E+24 2.64E+23 2.65E+24 3.225E+24 8.29 55.38 ------------------------------------------------------------------------------------- Basal-Strength: -3.82E+24 -4.17E+24 3.33E+24 6.562E+24 -132.44 30.46 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.84E+25 7.96E+24 4.68E+24 2.058E+25 23.40 13.15 Continuum-Link [PLUG]: 1.44E+17 4.28E+17 3.09E+17 5.474E+17 71.45 34.35 ------------------------------------------------------------------------------------- Side-Strength: 1.84E+25 7.96E+24 4.68E+24 2.058E+25 23.40 13.15 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.46E+25 -3.79E+24 -8.01E+24 1.706E+25 -165.44 -28.01 Side-Strength: 1.84E+25 7.96E+24 4.68E+24 2.058E+25 23.40 13.15 Basal-Strength: -3.82E+24 -4.17E+24 3.33E+24 6.562E+24 -132.44 30.46 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.63E+07 -6.48E+07 7.90E+06 6.732E+07 -75.88 6.74 Suggested viewpoint for orthographic projection of torques on this plate is: ( -59.79E,-26.89N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -7.00E+17 -1.60E+18 2.03E+18 2.678E+18 328.2 Side-strength: 1.67E+15 1.64E+18 -2.79E+18 3.231E+18 165.2 Basal-strength: 6.99E+17 -3.66E+16 7.56E+17 1.030E+18 34.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -75.49E, 5.94N). ====================================================================================== Plate # 32 =NH: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 4.85E+24 -1.41E+24 -1.44E+25 1.529E+25 -16.26 -70.69 Velocity-Boundary-C.'s 6.50E+22 -2.68E+22 -3.31E+23 3.387E+23 -22.43 -78.02 ------------------------------------------------------------------------------------- Basal-Strength: 4.92E+24 -1.44E+24 -1.48E+25 1.562E+25 -16.34 -70.85 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.44E+24 2.63E+24 1.68E+25 1.787E+25 154.20 70.24 Continuum-Link [PLUG]: -2.06E+17 -5.54E+16 4.23E+17 4.737E+17 -164.92 63.29 ------------------------------------------------------------------------------------- Side-Strength: -5.44E+24 2.63E+24 1.68E+25 1.787E+25 154.20 70.24 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.22E+23 -1.19E+24 -2.06E+24 2.432E+24 -66.28 -57.75 Side-Strength: -5.44E+24 2.63E+24 1.68E+25 1.787E+25 154.20 70.24 Basal-Strength: 4.92E+24 -1.44E+24 -1.48E+25 1.562E+25 -16.34 -70.85 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.61E+07 -4.56E+06 4.51E+06 2.690E+07 -9.91 9.65 Suggested viewpoint for orthographic projection of torques on this plate is: ( 170.60E,-19.02N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.11E+17 3.28E+17 -1.61E+17 3.818E+17 243.5 Side-strength: -5.42E+17 -2.74E+18 2.53E+17 2.804E+18 84.5 Basal-strength: 4.31E+17 2.41E+18 -9.19E+16 2.452E+18 267.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 170.38E, -17.83N). ====================================================================================== Plate # 33 =NI: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.23E+23 -2.76E+24 -3.83E+23 2.802E+24 -83.31 -7.86 Velocity-Boundary-C.'s 1.05E+22 -4.70E+22 -1.86E+22 5.161E+22 -77.43 -21.11 ------------------------------------------------------------------------------------- Basal-Strength: 3.34E+23 -2.80E+24 -4.02E+23 2.852E+24 -83.21 -8.10 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.35E+23 1.90E+24 -1.28E+23 1.907E+24 94.08 -3.85 Continuum-Link [PLUG]: -1.01E+16 2.49E+17 -2.13E+16 2.497E+17 92.32 -4.89 ------------------------------------------------------------------------------------- Side-Strength: -1.35E+23 1.90E+24 -1.28E+23 1.907E+24 94.08 -3.85 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.98E+23 9.05E+23 5.30E+23 1.068E+24 102.35 29.75 Side-Strength: -1.35E+23 1.90E+24 -1.28E+23 1.907E+24 94.08 -3.85 Basal-Strength: 3.34E+23 -2.80E+24 -4.02E+23 2.852E+24 -83.21 -8.10 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.41E+06 -3.30E+06 3.94E+05 4.761E+06 -44.13 4.75 Suggested viewpoint for orthographic projection of torques on this plate is: (-175.05E,-12.70N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.42E+16 -8.77E+16 1.41E+17 1.676E+17 30.6 Side-strength: -6.72E+16 1.48E+16 2.91E+17 2.993E+17 356.1 Basal-strength: 9.14E+16 7.28E+16 -4.32E+17 4.476E+17 188.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-175.80E, -16.91N). ====================================================================================== Plate # 34 =NZ: 390 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -1.25E+25 -1.96E+25 5.79E+25 6.241E+25 -122.42 68.15 ------------------------------------------------------------------------------------- Basal-Strength: -1.25E+25 -1.96E+25 5.79E+25 6.241E+25 -122.42 68.15 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 6.17E+24 3.01E+25 -8.44E+25 8.978E+25 78.40 -70.00 Continuum-Link [PLUG]: 2.31E+17 1.15E+17 1.58E+16 2.580E+17 26.45 3.51 ------------------------------------------------------------------------------------- Side-Strength: 6.17E+24 3.01E+25 -8.44E+25 8.978E+25 78.40 -70.00 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.28E+24 -1.05E+25 2.64E+25 2.913E+25 -59.07 65.20 Side-Strength: 6.17E+24 3.01E+25 -8.44E+25 8.978E+25 78.40 -70.00 Basal-Strength: -1.25E+25 -1.96E+25 5.79E+25 6.241E+25 -122.42 68.15 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.23E+05 -8.87E+04 6.28E+05 6.459E+05 -144.17 76.43 Suggested viewpoint for orthographic projection of torques on this plate is: ( -97.29E,-19.95N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 4.43E+18 -1.59E+17 -1.12E+18 4.572E+18 105.0 Side-strength: -1.40E+19 1.91E+18 -3.40E+17 1.409E+19 268.5 Basal-strength: 9.53E+18 -1.75E+18 1.46E+18 9.796E+18 80.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -92.39E, -19.89N). ====================================================================================== Plate # 35 =OK: 90 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.29E+25 8.74E+23 1.76E+24 2.297E+25 2.19 4.38 Velocity-Boundary-C.'s 7.38E+24 2.66E+24 3.20E+24 8.474E+24 19.81 22.17 ------------------------------------------------------------------------------------- Basal-Strength: 3.03E+25 3.53E+24 4.95E+24 3.088E+25 6.66 9.23 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.87E+25 2.71E+25 -1.96E+25 3.831E+25 124.57 -30.78 Continuum-Link [PLUG]: -1.19E+25 1.59E+25 -8.07E+24 2.142E+25 126.79 -22.14 ------------------------------------------------------------------------------------- Side-Strength: -3.06E+25 4.30E+25 -2.77E+25 5.956E+25 125.41 -27.69 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.84E+23 -4.65E+25 2.27E+25 5.178E+25 -89.65 26.03 Side-Strength: -3.06E+25 4.30E+25 -2.77E+25 5.956E+25 125.41 -27.69 Basal-Strength: 3.03E+25 3.53E+24 4.95E+24 3.088E+25 6.66 9.23 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.85E+07 -1.01E+07 -2.38E+07 3.172E+07 -28.63 -48.49 Suggested viewpoint for orthographic projection of torques on this plate is: ( 114.35E, 61.87N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -7.97E+18 -7.33E+17 -1.40E+18 8.127E+18 111.4 Side-strength: 7.82E+18 5.07E+18 -7.48E+17 9.349E+18 260.2 Basal-strength: 1.55E+17 -4.34E+18 2.15E+18 4.847E+18 19.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.52E, 51.90N). ====================================================================================== Plate # 36 =ON: 21 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -8.49E+24 -1.56E+25 1.56E+25 2.366E+25 -118.54 41.33 Velocity-Boundary-C.'s 1.01E+24 9.07E+22 1.37E+24 1.706E+24 5.14 53.62 ------------------------------------------------------------------------------------- Basal-Strength: -7.48E+24 -1.55E+25 1.70E+25 2.420E+25 -115.73 44.62 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 9.16E+24 1.97E+25 -2.12E+25 3.037E+25 65.05 -44.35 Continuum-Link [PLUG]: -1.24E+18 -8.49E+17 1.24E+17 1.508E+18 -145.60 4.71 ------------------------------------------------------------------------------------- Side-Strength: 9.16E+24 1.97E+25 -2.12E+25 3.037E+25 65.05 -44.35 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.68E+24 -4.17E+24 4.23E+24 6.172E+24 -111.94 43.25 Side-Strength: 9.16E+24 1.97E+25 -2.12E+25 3.037E+25 65.05 -44.35 Basal-Strength: -7.48E+24 -1.55E+25 1.70E+25 2.420E+25 -115.73 44.62 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -7.65E+07 8.62E+07 6.93E+07 1.344E+08 131.58 31.01 Suggested viewpoint for orthographic projection of torques on this plate is: ( 30.39E, 40.08N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -6.78E+17 6.08E+17 3.30E+17 9.688E+17 63.6 Side-strength: 3.28E+18 -3.12E+18 -1.48E+18 4.767E+18 246.0 Basal-strength: -2.60E+18 2.52E+18 1.15E+18 3.799E+18 66.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 127.68E, 27.18N). ====================================================================================== Plate # 37 =PA: 2930 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.03E+20 -8.30E+20 -1.34E+21 1.624E+21 -115.88 -55.38 Velocity-Boundary-C.'s -3.37E+25 7.98E+25 -9.52E+25 1.287E+26 112.90 -47.69 ------------------------------------------------------------------------------------- Basal-Strength: -3.37E+25 7.98E+25 -9.52E+25 1.287E+26 112.90 -47.69 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.32E+25 -1.35E+26 2.12E+26 2.553E+26 -72.28 56.18 Continuum-Link [PLUG]: 6.90E+23 -7.82E+23 -5.03E+23 1.158E+24 -48.57 -25.74 ------------------------------------------------------------------------------------- Side-Strength: 4.39E+25 -1.36E+26 2.12E+26 2.554E+26 -72.11 55.94 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.02E+25 5.63E+25 -1.16E+26 1.297E+26 100.28 -63.83 Side-Strength: 4.39E+25 -1.36E+26 2.12E+26 2.554E+26 -72.11 55.94 Basal-Strength: -3.37E+25 7.98E+25 -9.52E+25 1.287E+26 112.90 -47.69 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.75E+04 1.42E+05 -1.77E+05 2.315E+05 108.50 -49.75 Suggested viewpoint for orthographic projection of torques on this plate is: (-143.09E,-12.42N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.26E+19 1.39E+19 7.84E+18 2.036E+19 293.2 Side-strength: 2.41E+19 -2.45E+19 -2.07E+19 4.009E+19 122.0 Basal-strength: -1.15E+19 1.05E+19 1.29E+19 2.021E+19 310.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-147.60E, 11.97N). ====================================================================================== Plate # 38 =PM: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.14E+25 -3.84E+24 7.07E+24 3.239E+25 -173.02 12.61 Velocity-Boundary-C.'s -1.03E+25 -1.82E+24 8.67E+23 1.047E+25 -169.93 4.75 ------------------------------------------------------------------------------------- Basal-Strength: -4.16E+25 -5.66E+24 7.94E+24 4.277E+25 -172.26 10.70 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.33E+25 6.11E+24 -7.12E+24 4.431E+25 8.03 -9.25 Continuum-Link [PLUG]: -4.67E+18 -9.90E+17 4.42E+17 4.797E+18 -168.03 5.29 ------------------------------------------------------------------------------------- Side-Strength: 4.33E+25 6.11E+24 -7.12E+24 4.431E+25 8.03 -9.25 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.66E+24 -4.47E+23 -8.16E+23 1.901E+24 -164.92 -25.43 Side-Strength: 4.33E+25 6.11E+24 -7.12E+24 4.431E+25 8.03 -9.25 Basal-Strength: -4.16E+25 -5.66E+24 7.94E+24 4.277E+25 -172.26 10.70 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.80E+06 -1.35E+08 2.57E+07 1.379E+08 -92.03 10.73 Suggested viewpoint for orthographic projection of torques on this plate is: ( -80.17E, 10.90N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.37E+17 2.77E+16 2.64E+17 2.984E+17 334.1 Side-strength: -9.00E+17 -1.47E+18 -6.74E+18 6.955E+18 189.4 Basal-strength: 1.04E+18 1.44E+18 6.47E+18 6.714E+18 10.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -81.25E, 8.79N). ====================================================================================== Plate # 39 =PS: 248 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.40E+22 -9.69E+21 4.85E+22 5.136E+22 -34.76 70.68 Velocity-Boundary-C.'s 1.66E+25 4.08E+25 -6.47E+25 7.829E+25 67.86 -55.73 ------------------------------------------------------------------------------------- Basal-Strength: 1.66E+25 4.08E+25 -6.47E+25 7.825E+25 67.84 -55.71 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.45E+25 -2.69E+25 3.47E+25 4.626E+25 -118.27 48.61 Continuum-Link [PLUG]: -8.18E+24 -1.06E+25 1.54E+25 2.039E+25 -127.69 48.98 ------------------------------------------------------------------------------------- Side-Strength: -2.27E+25 -3.75E+25 5.01E+25 6.657E+25 -121.13 48.80 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.04E+24 -3.30E+24 1.46E+25 1.611E+25 -28.61 64.71 Side-Strength: -2.27E+25 -3.75E+25 5.01E+25 6.657E+25 -121.13 48.80 Basal-Strength: 1.66E+25 4.08E+25 -6.47E+25 7.825E+25 67.84 -55.71 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.78E+06 -1.21E+06 -3.02E+06 4.282E+06 -23.50 -44.83 Suggested viewpoint for orthographic projection of torques on this plate is: ( 121.09E, 22.20N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.01E+18 -1.45E+18 5.05E+17 2.528E+18 77.5 Side-strength: -8.46E+18 -2.41E+18 -5.64E+18 1.045E+19 125.6 Basal-strength: 1.05E+19 3.87E+18 5.13E+18 1.228E+19 296.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 128.06E, 17.86N). ====================================================================================== Plate # 40 =RI: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -5.99E+24 4.94E+24 8.11E+24 1.123E+25 140.47 46.27 ------------------------------------------------------------------------------------- Basal-Strength: -5.99E+24 4.94E+24 8.11E+24 1.123E+25 140.47 46.27 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 6.05E+24 -5.09E+24 -8.47E+24 1.158E+25 -40.08 -46.97 Continuum-Link [PLUG]: -9.48E+16 3.28E+15 1.25E+17 1.566E+17 178.02 52.69 ------------------------------------------------------------------------------------- Side-Strength: 6.05E+24 -5.09E+24 -8.47E+24 1.158E+25 -40.08 -46.97 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -6.03E+22 1.48E+23 3.54E+23 3.886E+23 112.16 65.68 Side-Strength: 6.05E+24 -5.09E+24 -8.47E+24 1.158E+25 -40.08 -46.97 Basal-Strength: -5.99E+24 4.94E+24 8.11E+24 1.123E+25 140.47 46.27 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.90E+07 -8.67E+07 4.88E+07 1.069E+08 -114.19 27.17 Suggested viewpoint for orthographic projection of torques on this plate is: (-108.55E, 18.91N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 5.74E+16 -1.37E+16 1.55E+16 6.100E+16 74.4 Side-strength: -1.45E+18 9.24E+16 -1.09E+18 1.818E+18 230.6 Basal-strength: 1.39E+18 -7.87E+16 1.08E+18 1.762E+18 49.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-106.85E, 19.42N). ====================================================================================== Plate # 41 =SA: 1670 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 9.22E+25 1.36E+26 -2.14E+26 2.702E+26 55.88 -52.54 Velocity-Boundary-C.'s 1.93E+25 8.28E+24 2.81E+24 2.121E+25 23.18 7.62 ------------------------------------------------------------------------------------- Basal-Strength: 1.11E+26 1.44E+26 -2.12E+26 2.794E+26 52.31 -49.25 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -4.39E+25 -1.08E+26 1.85E+26 2.184E+26 -112.19 57.85 Continuum-Link [PLUG]: -7.25E+25 -5.73E+25 2.20E+25 9.503E+25 -141.69 13.40 ------------------------------------------------------------------------------------- Side-Strength: -1.16E+26 -1.65E+26 2.07E+26 2.890E+26 -125.22 45.71 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.91E+24 2.06E+25 4.78E+24 2.169E+25 76.58 12.73 Side-Strength: -1.16E+26 -1.65E+26 2.07E+26 2.890E+26 -125.22 45.71 Basal-Strength: 1.11E+26 1.44E+26 -2.12E+26 2.794E+26 52.31 -49.25 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.13E+06 -6.94E+04 -1.28E+06 1.705E+06 -3.52 -48.47 Suggested viewpoint for orthographic projection of torques on this plate is: ( -17.31E, 16.70N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.14E+18 4.64E+17 -3.17E+18 3.404E+18 166.7 Side-strength: 1.82E+18 3.49E+19 2.89E+19 4.537E+19 48.4 Basal-strength: -2.96E+18 -3.54E+19 -2.57E+19 4.386E+19 232.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -55.68E, -25.40N). ====================================================================================== Plate # 42 =SB: 17 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -6.40E+24 -1.23E+25 3.16E+24 1.422E+25 -117.48 12.83 Velocity-Boundary-C.'s -2.81E+24 -5.55E+24 7.54E+23 6.267E+24 -116.90 6.91 ------------------------------------------------------------------------------------- Basal-Strength: -9.21E+24 -1.79E+25 3.91E+24 2.047E+25 -117.30 11.02 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.34E+25 2.40E+25 -7.81E+24 2.853E+25 60.88 -15.89 Continuum-Link [PLUG]: -6.09E+17 -1.65E+18 -3.02E+17 1.781E+18 -110.31 -9.77 ------------------------------------------------------------------------------------- Side-Strength: 1.34E+25 2.40E+25 -7.81E+24 2.853E+25 60.88 -15.89 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.14E+24 -6.12E+24 3.90E+24 8.351E+24 -124.09 27.83 Side-Strength: 1.34E+25 2.40E+25 -7.81E+24 2.853E+25 60.88 -15.89 Basal-Strength: -9.21E+24 -1.79E+25 3.91E+24 2.047E+25 -117.30 11.02 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 4.06E+08 -2.58E+08 4.44E+07 4.827E+08 -32.43 5.28 Suggested viewpoint for orthographic projection of torques on this plate is: ( 156.64E,-19.43N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 9.04E+16 -7.46E+17 -1.07E+18 1.311E+18 150.3 Side-strength: -7.93E+17 1.76E+18 4.04E+18 4.478E+18 343.1 Basal-strength: 7.02E+17 -1.01E+18 -2.97E+18 3.213E+18 168.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.32E, -4.97N). ====================================================================================== Plate # 43 =SC: 58 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.65E+25 -1.15E+25 1.43E+25 2.473E+25 -34.83 35.40 Velocity-Boundary-C.'s -2.25E+24 -1.30E+24 3.72E+23 2.629E+24 -149.98 8.13 ------------------------------------------------------------------------------------- Basal-Strength: 1.43E+25 -1.28E+25 1.47E+25 2.417E+25 -41.88 37.44 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -8.07E+24 1.32E+25 -1.10E+25 1.900E+25 121.40 -35.41 Continuum-Link [PLUG]: 8.70E+17 -8.92E+16 -3.83E+17 9.547E+17 -5.85 -23.65 ------------------------------------------------------------------------------------- Side-Strength: -8.07E+24 1.32E+25 -1.10E+25 1.900E+25 121.40 -35.41 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -6.22E+24 -4.05E+23 -3.69E+24 7.243E+24 -176.28 -30.59 Side-Strength: -8.07E+24 1.32E+25 -1.10E+25 1.900E+25 121.40 -35.41 Basal-Strength: 1.43E+25 -1.28E+25 1.47E+25 2.417E+25 -41.88 37.44 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.63E+06 4.80E+06 1.34E+07 1.469E+07 127.06 65.82 Suggested viewpoint for orthographic projection of torques on this plate is: ( -36.08E,-52.42N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.57E+17 -1.06E+18 3.82E+17 1.137E+18 303.4 Side-strength: -2.26E+18 -1.86E+18 -5.68E+17 2.982E+18 251.8 Basal-strength: 2.42E+18 2.91E+18 1.86E+17 3.794E+18 85.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -51.21E, -57.35N). ====================================================================================== Plate # 44 =SL: 6 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.73E+24 -1.71E+24 -4.44E+23 5.052E+24 -160.19 -5.04 Velocity-Boundary-C.'s -5.04E+23 -5.79E+22 -1.10E+23 5.191E+23 -173.45 -12.20 ------------------------------------------------------------------------------------- Basal-Strength: -5.24E+24 -1.76E+24 -5.53E+23 5.555E+24 -161.40 -5.72 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 7.24E+24 1.48E+24 1.23E+24 7.495E+24 11.53 9.44 Continuum-Link [PLUG]: 1.81E+15 1.31E+17 -8.23E+16 1.547E+17 89.21 -32.16 ------------------------------------------------------------------------------------- Side-Strength: 7.24E+24 1.48E+24 1.23E+24 7.495E+24 11.53 9.44 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -2.01E+24 2.85E+23 -6.76E+23 2.135E+24 171.91 -18.47 Side-Strength: 7.24E+24 1.48E+24 1.23E+24 7.495E+24 11.53 9.44 Basal-Strength: -5.24E+24 -1.76E+24 -5.53E+23 5.555E+24 -161.40 -5.72 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -9.97E+07 1.42E+08 3.17E+08 3.617E+08 125.09 61.36 Suggested viewpoint for orthographic projection of torques on this plate is: ( -60.98E,-61.03N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -8.41E+16 -3.00E+17 1.23E+17 3.352E+17 319.2 Side-strength: -1.21E+17 1.04E+18 -5.36E+17 1.176E+18 160.2 Basal-strength: 2.05E+17 -7.40E+17 4.13E+17 8.720E+17 348.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -59.13E, -61.92N). ====================================================================================== Plate # 45 =SO: 441 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.67E+25 -5.86E+25 -6.53E+25 9.173E+25 -114.53 -45.40 Velocity-Boundary-C.'s -9.22E+24 -1.87E+24 -1.25E+25 1.562E+25 -168.54 -52.97 ------------------------------------------------------------------------------------- Basal-Strength: -3.60E+25 -6.05E+25 -7.78E+25 1.049E+26 -120.74 -47.87 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.48E+25 1.44E+25 -1.11E+25 2.346E+25 44.24 -28.20 Continuum-Link [PLUG]: 3.85E+25 3.33E+25 6.71E+25 8.428E+25 40.87 52.80 ------------------------------------------------------------------------------------- Side-Strength: 5.33E+25 4.78E+25 5.60E+25 9.093E+25 41.84 38.05 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.74E+25 1.27E+25 2.17E+25 3.060E+25 143.84 45.28 Side-Strength: 5.33E+25 4.78E+25 5.60E+25 9.093E+25 41.84 38.05 Basal-Strength: -3.60E+25 -6.05E+25 -7.78E+25 1.049E+26 -120.74 -47.87 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.33E+06 -3.96E+06 3.51E+05 5.183E+06 -130.03 3.88 Suggested viewpoint for orthographic projection of torques on this plate is: ( 98.70E,-34.93N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -3.91E+18 -1.99E+18 -1.96E+18 4.802E+18 119.9 Side-strength: -1.14E+19 3.70E+18 7.71E+18 1.427E+19 48.7 Basal-strength: 1.53E+19 -1.72E+18 -5.75E+18 1.646E+19 244.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 48.22E, -14.19N). ====================================================================================== Plate # 46 =SS: 9 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -5.95E+24 -1.24E+25 -2.76E+23 1.374E+25 -115.67 -1.15 ------------------------------------------------------------------------------------- Basal-Strength: -5.95E+24 -1.24E+25 -2.76E+23 1.374E+25 -115.67 -1.15 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.25E+24 7.12E+24 -8.33E+22 7.829E+24 65.47 -0.61 Continuum-Link [PLUG]: 3.06E+17 2.99E+17 6.13E+17 7.474E+17 44.30 55.09 ------------------------------------------------------------------------------------- Side-Strength: 3.25E+24 7.12E+24 -8.33E+22 7.829E+24 65.47 -0.61 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.70E+24 5.26E+24 3.59E+23 5.928E+24 62.82 3.48 Side-Strength: 3.25E+24 7.12E+24 -8.33E+22 7.829E+24 65.47 -0.61 Basal-Strength: -5.95E+24 -1.24E+25 -2.76E+23 1.374E+25 -115.67 -1.15 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.99E+08 -3.30E+08 8.76E+07 6.893E+08 -28.90 7.30 Suggested viewpoint for orthographic projection of torques on this plate is: ( 155.07E, 32.95N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 4.29E+17 -2.74E+17 7.79E+17 9.304E+17 4.1 Side-strength: 6.13E+17 -2.68E+17 1.03E+18 1.229E+18 359.3 Basal-strength: -1.04E+18 5.41E+17 -1.81E+18 2.157E+18 181.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 152.11E, -7.29N). ====================================================================================== Plate # 47 =SU: 599 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 6.58E+24 -3.08E+25 1.33E+26 1.364E+26 -77.92 76.67 Velocity-Boundary-C.'s 6.58E+24 2.87E+24 -9.45E+24 1.187E+25 23.61 -52.79 ------------------------------------------------------------------------------------- Basal-Strength: 1.32E+25 -2.79E+25 1.23E+26 1.271E+26 -64.74 75.96 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 8.63E+25 5.08E+25 -9.41E+25 1.374E+26 30.48 -43.23 Continuum-Link [PLUG]: -5.65E+25 -4.93E+24 -3.52E+25 6.671E+25 -175.02 -31.80 ------------------------------------------------------------------------------------- Side-Strength: 2.98E+25 4.59E+25 -1.29E+26 1.404E+26 56.98 -67.07 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.30E+25 -1.80E+25 6.00E+24 4.696E+25 -157.30 7.34 Side-Strength: 2.98E+25 4.59E+25 -1.29E+26 1.404E+26 56.98 -67.07 Basal-Strength: 1.32E+25 -2.79E+25 1.23E+26 1.271E+26 -64.74 75.96 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.89E+06 -9.86E+06 1.47E+06 1.070E+07 -68.46 7.90 Suggested viewpoint for orthographic projection of torques on this plate is: ( 110.86E, 14.00N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.54E+18 1.31E+18 -7.09E+18 7.371E+18 172.4 Side-strength: 2.01E+19 5.88E+18 6.73E+18 2.204E+19 288.3 Basal-strength: -1.86E+19 -7.19E+18 3.60E+17 1.995E+19 88.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 119.63E, 8.40N). ====================================================================================== Plate # 48 =SW: 10 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 7.77E+24 -1.99E+24 4.97E+24 9.437E+24 -14.38 31.74 Velocity-Boundary-C.'s 2.16E+22 -1.41E+22 1.51E+22 2.985E+22 -33.14 30.32 ------------------------------------------------------------------------------------- Basal-Strength: 7.80E+24 -2.01E+24 4.98E+24 9.466E+24 -14.44 31.74 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -8.76E+24 4.24E+24 -6.10E+24 1.149E+25 154.19 -32.10 Continuum-Link [PLUG]: 6.97E+16 1.21E+17 4.85E+16 1.475E+17 60.00 19.20 ------------------------------------------------------------------------------------- Side-Strength: -8.76E+24 4.24E+24 -6.10E+24 1.149E+25 154.19 -32.10 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 9.67E+23 -2.23E+24 1.12E+24 2.678E+24 -66.56 24.83 Side-Strength: -8.76E+24 4.24E+24 -6.10E+24 1.149E+25 154.19 -32.10 Basal-Strength: 7.80E+24 -2.01E+24 4.98E+24 9.466E+24 -14.44 31.74 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -9.86E+06 6.88E+06 3.41E+07 3.617E+07 145.09 70.59 Suggested viewpoint for orthographic projection of torques on this plate is: ( -24.07E,-57.89N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.35E+17 2.14E+17 1.37E+17 4.203E+17 52.2 Side-strength: -7.71E+17 -1.63E+18 -2.47E+16 1.803E+18 268.5 Basal-strength: 4.36E+17 1.42E+18 -1.12E+17 1.486E+18 98.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -27.46E, -57.82N). ====================================================================================== Plate # 49 =TI: 19 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.03E+25 9.08E+24 -2.87E+25 3.628E+25 24.16 -52.28 Velocity-Boundary-C.'s 1.23E+24 1.12E+24 4.91E+23 1.736E+24 42.14 16.42 ------------------------------------------------------------------------------------- Basal-Strength: 2.15E+25 1.02E+25 -2.82E+25 3.690E+25 25.40 -49.86 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.35E+25 -1.17E+25 2.83E+25 3.865E+25 -153.54 47.17 Continuum-Link [PLUG]: 1.36E+18 3.19E+17 2.97E+17 1.428E+18 13.19 12.02 ------------------------------------------------------------------------------------- Side-Strength: -2.35E+25 -1.17E+25 2.83E+25 3.865E+25 -153.54 47.17 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.03E+24 1.51E+24 -1.42E+23 2.535E+24 36.51 -3.21 Side-Strength: -2.35E+25 -1.17E+25 2.83E+25 3.865E+25 -153.54 47.17 Basal-Strength: 2.15E+25 1.02E+25 -2.82E+25 3.690E+25 25.40 -49.86 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.02E+07 3.36E+06 -1.21E+07 1.622E+07 18.20 -48.40 Suggested viewpoint for orthographic projection of torques on this plate is: ( 127.06E, -9.67N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.22E+16 6.69E+16 3.92E+17 3.978E+17 356.7 Side-strength: -3.19E+18 -3.26E+18 -4.00E+18 6.067E+18 131.9 Basal-strength: 3.21E+18 3.20E+18 3.60E+18 5.791E+18 309.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 125.91E, -8.81N). ====================================================================================== Plate # 50 =TO: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.32E+23 -3.60E+23 3.02E+24 3.068E+24 -140.19 79.44 Velocity-Boundary-C.'s -9.93E+22 9.63E+22 2.49E+23 2.852E+23 135.87 60.98 ------------------------------------------------------------------------------------- Basal-Strength: -5.31E+23 -2.64E+23 3.27E+24 3.319E+24 -153.61 79.71 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.85E+24 4.85E+24 -1.31E+25 1.448E+25 51.53 -64.69 Continuum-Link [PLUG]: 1.66E+17 -4.78E+17 -2.37E+17 5.590E+17 -70.89 -25.06 ------------------------------------------------------------------------------------- Side-Strength: 3.85E+24 4.85E+24 -1.31E+25 1.448E+25 51.53 -64.69 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.32E+24 -4.58E+24 9.82E+24 1.133E+25 -125.91 60.06 Side-Strength: 3.85E+24 4.85E+24 -1.31E+25 1.448E+25 51.53 -64.69 Basal-Strength: -5.31E+23 -2.64E+23 3.27E+24 3.319E+24 -153.61 79.71 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.41E+08 1.36E+07 5.26E+07 1.514E+08 5.48 20.32 Suggested viewpoint for orthographic projection of torques on this plate is: ( 155.57E, -6.54N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -5.51E+17 -1.45E+18 -8.65E+17 1.779E+18 119.3 Side-strength: 7.57E+17 1.93E+18 9.36E+17 2.272E+18 294.5 Basal-strength: -2.06E+17 -4.73E+17 -7.17E+16 5.210E+17 98.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-174.51E, -19.32N). ====================================================================================== Plate # 51 =WL: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 9.24E+24 1.51E+25 -2.52E+25 3.081E+25 58.53 -54.92 Velocity-Boundary-C.'s 3.26E+24 6.82E+24 -3.46E+24 8.314E+24 64.44 -24.62 ------------------------------------------------------------------------------------- Basal-Strength: 1.25E+25 2.19E+25 -2.87E+25 3.820E+25 60.29 -48.65 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.69E+25 -2.92E+25 2.59E+25 4.251E+25 -119.96 37.46 Continuum-Link [PLUG]: 2.33E+18 1.19E+18 -5.50E+16 2.615E+18 26.96 -1.21 ------------------------------------------------------------------------------------- Side-Strength: -1.69E+25 -2.92E+25 2.59E+25 4.251E+25 -119.96 37.46 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.35E+24 7.32E+24 2.82E+24 8.967E+24 59.30 18.36 Side-Strength: -1.69E+25 -2.92E+25 2.59E+25 4.251E+25 -119.96 37.46 Basal-Strength: 1.25E+25 2.19E+25 -2.87E+25 3.820E+25 60.29 -48.65 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.63E+08 1.18E+08 -3.33E+07 2.042E+08 144.16 -9.40 Suggested viewpoint for orthographic projection of torques on this plate is: ( 149.52E, 0.68N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.11E+17 -3.90E+17 1.34E+18 1.407E+18 18.4 Side-strength: -2.11E+18 -3.47E+18 -5.30E+18 6.673E+18 142.5 Basal-strength: 2.32E+18 3.86E+18 3.96E+18 5.996E+18 311.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 147.26E, -6.57N). ====================================================================================== Plate # 52 =YA: 56 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -5.48E+25 6.03E+24 -5.77E+25 7.981E+25 173.73 -46.28 Velocity-Boundary-C.'s 4.24E+24 -5.66E+24 9.47E+24 1.182E+25 -53.18 53.22 ------------------------------------------------------------------------------------- Basal-Strength: -5.06E+25 3.64E+23 -4.82E+25 6.989E+25 179.59 -43.62 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.28E+24 -3.46E+23 -1.11E+24 1.729E+24 -164.90 -39.86 Continuum-Link [PLUG]: 5.36E+25 2.32E+24 4.70E+25 7.135E+25 2.47 41.19 ------------------------------------------------------------------------------------- Side-Strength: 5.24E+25 1.97E+24 4.59E+25 6.965E+25 2.15 41.20 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.77E+24 -2.33E+24 2.34E+24 3.749E+24 -127.23 38.57 Side-Strength: 5.24E+25 1.97E+24 4.59E+25 6.965E+25 2.15 41.20 Basal-Strength: -5.06E+25 3.64E+23 -4.82E+25 6.989E+25 179.59 -43.62 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.48E+06 -1.35E+07 -1.22E+07 1.837E+07 -79.61 -41.50 Suggested viewpoint for orthographic projection of torques on this plate is: ( 118.72E, 27.06N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -4.53E+17 -3.04E+16 -3.74E+17 5.884E+17 135.6 Side-strength: -5.48E+18 -6.82E+18 6.55E+18 1.093E+19 47.7 Basal-strength: 5.94E+18 6.85E+18 -6.18E+18 1.097E+19 230.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 116.71E, 28.30N). ======================================================================================