Earth5-2023d.feg: Topology from 2008; nodal data from OrbData2023; LR = 0 in PTB Earth5R-type4A.bcs: forced slabs(4), w/ exceptions (A); no plate-interior VBCs iEarth5-270.in: Diorite2, except trHMax increased from 4 to 8 MPa Torque-balance reports for each of 52 plates (fFric 0.085, tauMax 1.1E+12\ 1.1E+12): plate # 1 =AF: 1288 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.02E+25 -4.40E+25 9.23E+25 1.066E+26 -124.48 59.97 Velocity-Boundary-C.'s -1.25E+25 -6.18E+24 1.15E+25 1.808E+25 -153.63 39.66 ------------------------------------------------------------------------------------- Basal-Strength: -4.27E+25 -5.01E+25 1.04E+26 1.229E+26 -130.39 57.62 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.30E+25 9.78E+25 3.35E+24 1.032E+26 71.35 1.86 Continuum-Link [PLUG]: -2.86E+25 -6.53E+25 -8.05E+25 1.076E+26 -113.67 -48.47 ------------------------------------------------------------------------------------- Side-Strength: 4.36E+24 3.24E+25 -7.72E+25 8.384E+25 82.35 -67.03 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 3.83E+25 1.77E+25 -2.66E+25 4.989E+25 24.81 -32.24 Side-Strength: 4.36E+24 3.24E+25 -7.72E+25 8.384E+25 82.35 -67.03 Basal-Strength: -4.27E+25 -5.01E+25 1.04E+26 1.229E+26 -130.39 57.62 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.63E+05 -1.78E+05 3.37E+05 5.998E+05 -158.96 34.18 Suggested viewpoint for orthographic projection of torques on this plate is: ( -79.94E,-21.99N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -4.85E+18 1.57E+18 -5.94E+18 7.831E+18 215.1 Side-strength: -1.30E+19 -1.71E+18 -1.45E+18 1.316E+19 263.2 Basal-strength: 1.78E+19 1.31E+17 7.39E+18 1.929E+19 65.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 2.86E, 0.60N). ====================================================================================== plate # 2 =AM: 134 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.27E+25 -3.60E+25 -4.35E+23 3.821E+25 -109.48 -0.65 Velocity-Boundary-C.'s 2.05E+13 2.05E+13 -2.68E+12 2.911E+13 45.00 -5.29 ------------------------------------------------------------------------------------- Basal-Strength: -1.27E+25 -3.60E+25 -4.35E+23 3.821E+25 -109.48 -0.65 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.18E+25 6.54E+25 -1.53E+25 7.913E+25 57.45 -11.13 Continuum-Link [PLUG]: -1.27E+25 -9.41E+24 8.82E+24 1.813E+25 -143.55 29.11 ------------------------------------------------------------------------------------- Side-Strength: 2.90E+25 5.60E+25 -6.46E+24 6.343E+25 62.61 -5.84 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.63E+25 -2.00E+25 6.89E+24 2.670E+25 -129.15 14.96 Side-Strength: 2.90E+25 5.60E+25 -6.46E+24 6.343E+25 62.61 -5.84 Basal-Strength: -1.27E+25 -3.60E+25 -4.35E+23 3.821E+25 -109.48 -0.65 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 8.72E+06 -1.35E+07 -1.62E+07 2.283E+07 -57.13 -45.29 Suggested viewpoint for orthographic projection of torques on this plate is: ( -20.28E, 50.45N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.18E+18 2.62E+18 2.44E+18 4.191E+18 23.9 Side-strength: 6.56E+18 -4.12E+18 -6.26E+18 9.956E+18 189.2 Basal-strength: -4.37E+18 1.50E+18 3.82E+18 5.997E+18 359.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 127.74E, 46.43N). ====================================================================================== plate # 3 =AN: 1264 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.36E+25 -6.23E+24 4.34E+25 4.596E+25 -24.60 70.99 Velocity-Boundary-C.'s -6.42E+24 -1.06E+24 -4.82E+24 8.094E+24 -170.59 -36.54 ------------------------------------------------------------------------------------- Basal-Strength: 7.20E+24 -7.29E+24 3.86E+25 3.997E+25 -45.39 75.15 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -8.29E+24 5.78E+25 -2.26E+25 6.259E+25 98.16 -21.19 Continuum-Link [PLUG]: 4.51E+10 -1.20E+11 1.29E+10 1.291E+11 -69.44 5.73 ------------------------------------------------------------------------------------- Side-Strength: -8.29E+24 5.78E+25 -2.26E+25 6.259E+25 98.16 -21.19 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.09E+24 -5.05E+25 -1.60E+25 5.296E+25 -88.76 -17.59 Side-Strength: -8.29E+24 5.78E+25 -2.26E+25 6.259E+25 98.16 -21.19 Basal-Strength: 7.20E+24 -7.29E+24 3.86E+25 3.997E+25 -45.39 75.15 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.19E+03 -5.32E+04 4.22E+05 4.256E+05 -87.64 82.82 Suggested viewpoint for orthographic projection of torques on this plate is: ( 4.35E, -9.73N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.53E+18 -2.44E+18 7.80E+18 8.313E+18 342.1 Side-strength: -1.27E+18 -3.71E+18 -9.01E+18 9.824E+18 201.5 Basal-strength: -2.60E+17 6.15E+18 1.21E+18 6.273E+18 78.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 57.74E, -83.98N). ====================================================================================== plate # 4 =AP: 85 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.01E+25 -1.63E+25 3.60E+25 4.076E+25 -121.92 61.97 Velocity-Boundary-C.'s -5.54E+12 4.19E+13 -1.20E+14 1.274E+14 97.53 -70.62 ------------------------------------------------------------------------------------- Basal-Strength: -1.01E+25 -1.63E+25 3.60E+25 4.076E+25 -121.92 61.97 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.30E+25 -3.06E+24 -6.98E+24 1.511E+25 -166.81 -27.53 Continuum-Link [PLUG]: 2.31E+24 6.49E+24 -1.22E+25 1.405E+25 70.39 -60.64 ------------------------------------------------------------------------------------- Side-Strength: -1.07E+25 3.43E+24 -1.92E+25 2.229E+25 162.28 -59.63 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 2.09E+25 1.28E+25 -1.67E+25 2.967E+25 31.59 -34.36 Side-Strength: -1.07E+25 3.43E+24 -1.92E+25 2.229E+25 162.28 -59.63 Basal-Strength: -1.01E+25 -1.63E+25 3.60E+25 4.076E+25 -121.92 61.97 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.24E+06 -1.76E+07 2.83E+06 1.809E+07 -79.57 9.00 Suggested viewpoint for orthographic projection of torques on this plate is: ( -71.96E,-18.91N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -3.02E+18 2.91E+17 -3.54E+18 4.657E+18 216.6 Side-strength: -2.89E+18 -1.43E+18 1.36E+18 3.498E+18 294.2 Basal-strength: 5.91E+18 1.14E+18 2.18E+18 6.397E+18 68.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -70.13E, -17.84N). ====================================================================================== plate # 5 =AR: 188 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.53E+26 -1.06E+26 -3.58E+25 1.893E+26 -34.84 -10.89 Velocity-Boundary-C.'s 3.03E+13 -6.44E+12 -2.07E+13 3.722E+13 -12.01 -33.77 ------------------------------------------------------------------------------------- Basal-Strength: 1.53E+26 -1.06E+26 -3.58E+25 1.893E+26 -34.84 -10.89 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.25E+26 8.41E+25 2.54E+25 1.527E+26 146.04 9.59 Continuum-Link [PLUG]: -1.03E+25 1.25E+25 -5.61E+24 1.719E+25 129.52 -19.03 ------------------------------------------------------------------------------------- Side-Strength: -1.35E+26 9.66E+25 1.98E+25 1.674E+26 144.45 6.80 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.73E+25 9.54E+24 1.59E+25 2.539E+25 151.13 38.88 Side-Strength: -1.35E+26 9.66E+25 1.98E+25 1.674E+26 144.45 6.80 Basal-Strength: 1.53E+26 -1.06E+26 -3.58E+25 1.893E+26 -34.84 -10.89 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.27E+07 4.98E+06 3.90E+06 1.420E+07 21.37 15.93 Suggested viewpoint for orthographic projection of torques on this plate is: ( 53.29E, 9.60N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.73E+18 1.93E+18 -3.03E+18 3.986E+18 140.5 Side-strength: 6.97E+16 5.37E+18 -2.57E+19 2.627E+19 173.1 Basal-strength: 1.66E+18 -7.30E+18 2.87E+19 2.971E+19 349.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 47.56E, 26.35N). ====================================================================================== plate # 6 =AS: 415 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.64E+24 1.44E+25 -4.88E+24 1.546E+25 100.37 -18.41 Velocity-Boundary-C.'s -5.30E+13 3.79E+13 4.38E+13 7.853E+13 144.46 33.91 ------------------------------------------------------------------------------------- Basal-Strength: -2.64E+24 1.44E+25 -4.88E+24 1.546E+25 100.37 -18.41 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.35E+24 -8.62E+24 3.12E+24 9.268E+24 -81.13 19.70 Continuum-Link [PLUG]: 2.86E+24 -1.32E+25 4.12E+24 1.411E+25 -77.78 16.98 ------------------------------------------------------------------------------------- Side-Strength: 4.20E+24 -2.18E+25 7.25E+24 2.337E+25 -79.09 18.06 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.56E+24 7.38E+24 -2.36E+24 7.907E+24 101.96 -17.38 Side-Strength: 4.20E+24 -2.18E+25 7.25E+24 2.337E+25 -79.09 18.06 Basal-Strength: -2.64E+24 1.44E+25 -4.88E+24 1.546E+25 100.37 -18.41 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 9.56E+06 1.30E+07 6.44E+06 1.735E+07 53.59 21.80 Suggested viewpoint for orthographic projection of torques on this plate is: ( 35.50E, 51.91N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.04E+18 6.91E+15 -6.70E+17 1.241E+18 209.0 Side-strength: -3.10E+18 5.19E+16 1.96E+18 3.667E+18 30.2 Basal-strength: 2.06E+18 -5.88E+16 -1.29E+18 2.427E+18 210.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 25.46E, 36.81N). ====================================================================================== plate # 7 =AT: 192 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.99E+24 -1.37E+25 5.58E+24 1.488E+25 -81.70 22.02 Velocity-Boundary-C.'s 1.59E+13 1.55E+13 -2.74E+13 3.532E+13 44.30 -50.98 ------------------------------------------------------------------------------------- Basal-Strength: 1.99E+24 -1.37E+25 5.58E+24 1.488E+25 -81.70 22.02 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 2.92E+24 -6.18E+24 3.09E+24 7.498E+24 -64.66 24.32 Continuum-Link [PLUG]: 5.72E+23 5.02E+24 -4.35E+24 6.668E+24 83.50 -40.75 ------------------------------------------------------------------------------------- Side-Strength: 3.50E+24 -1.16E+24 -1.26E+24 3.894E+24 -18.31 -18.96 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -5.49E+24 1.48E+25 -4.31E+24 1.637E+25 110.33 -15.28 Side-Strength: 3.50E+24 -1.16E+24 -1.26E+24 3.894E+24 -18.31 -18.96 Basal-Strength: 1.99E+24 -1.37E+25 5.58E+24 1.488E+25 -81.70 22.02 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -7.40E+07 -5.23E+07 -6.86E+07 1.137E+08 -144.76 -37.11 Suggested viewpoint for orthographic projection of torques on this plate is: ( 42.87E, 54.53N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.16E+18 4.13E+17 -1.33E+18 2.570E+18 207.0 Side-strength: -6.95E+16 -5.31E+17 2.94E+17 6.112E+17 326.0 Basal-strength: -2.09E+18 1.18E+17 1.03E+18 2.336E+18 40.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 29.37E, 38.78N). ====================================================================================== plate # 8 =AU: 999 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s 9.59E+25 -5.15E+25 5.12E+25 1.203E+26 -28.25 25.17 ------------------------------------------------------------------------------------- Basal-Strength: 9.59E+25 -5.15E+25 5.12E+25 1.203E+26 -28.25 25.17 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 6.11E+25 7.94E+23 -1.41E+26 1.537E+26 0.74 -66.59 Continuum-Link [PLUG]: -2.10E+26 9.04E+24 8.26E+25 2.261E+26 177.54 21.44 ------------------------------------------------------------------------------------- Side-Strength: -1.49E+26 9.83E+24 -5.84E+25 1.605E+26 176.23 -21.34 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.32E+25 4.17E+25 7.21E+24 6.801E+25 38.09 6.08 Side-Strength: -1.49E+26 9.83E+24 -5.84E+25 1.605E+26 176.23 -21.34 Basal-Strength: 9.59E+25 -5.15E+25 5.12E+25 1.203E+26 -28.25 25.17 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 9.72E+05 -1.08E+06 8.26E+05 1.672E+06 -48.03 29.62 Suggested viewpoint for orthographic projection of torques on this plate is: ( -39.05E,-64.43N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -5.60E+18 7.92E+18 -4.47E+18 1.068E+19 165.8 Side-strength: -3.88E+18 -2.42E+19 5.85E+18 2.519E+19 302.5 Basal-strength: 9.48E+18 1.63E+19 -1.38E+18 1.889E+19 99.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 122.75E, -30.59N). ====================================================================================== plate # 9 =BH: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.90E+24 1.34E+24 -2.58E+25 2.594E+25 35.24 -84.86 Velocity-Boundary-C.'s 3.37E+24 2.44E+24 -1.15E+25 1.225E+25 35.94 -70.16 ------------------------------------------------------------------------------------- Basal-Strength: 5.26E+24 3.78E+24 -3.74E+25 3.791E+25 35.69 -80.16 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -6.31E+24 -4.64E+24 3.90E+25 3.976E+25 -143.63 78.64 Continuum-Link [PLUG]: -3.22E+09 -2.15E+09 1.72E+10 1.761E+10 -146.31 77.30 ------------------------------------------------------------------------------------- Side-Strength: -6.31E+24 -4.64E+24 3.90E+25 3.976E+25 -143.63 78.64 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.04E+24 8.63E+23 -1.63E+24 2.117E+24 39.62 -50.24 Side-Strength: -6.31E+24 -4.64E+24 3.90E+25 3.976E+25 -143.63 78.64 Basal-Strength: 5.26E+24 3.78E+24 -3.74E+25 3.791E+25 35.69 -80.16 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -6.39E+06 9.97E+06 -1.15E+07 1.652E+07 122.66 -44.19 Suggested viewpoint for orthographic projection of torques on this plate is: ( 130.65E, -0.86N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.92E+17 1.69E+17 2.12E+17 3.322E+17 309.8 Side-strength: -4.63E+18 -4.00E+18 -1.23E+18 6.241E+18 101.3 Basal-strength: 4.44E+18 3.83E+18 1.01E+18 5.951E+18 279.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 132.17E, -1.47N). ====================================================================================== plate # 10 =BR: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 7.14E+21 -7.62E+24 -1.50E+24 7.771E+24 -89.95 -11.15 Velocity-Boundary-C.'s -1.53E+12 2.56E+13 1.16E+13 2.817E+13 93.42 24.30 ------------------------------------------------------------------------------------- Basal-Strength: 7.14E+21 -7.62E+24 -1.50E+24 7.771E+24 -89.95 -11.15 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.56E+22 8.43E+24 1.92E+24 8.644E+24 90.38 12.81 Continuum-Link [PLUG]: -3.10E+08 -4.29E+09 1.07E+09 4.438E+09 -94.13 14.00 ------------------------------------------------------------------------------------- Side-Strength: -5.56E+22 8.43E+24 1.92E+24 8.644E+24 90.38 12.81 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 4.84E+22 -8.04E+23 -4.14E+23 9.057E+23 -86.55 -27.17 Side-Strength: -5.56E+22 8.43E+24 1.92E+24 8.644E+24 90.38 12.81 Basal-Strength: 7.14E+21 -7.62E+24 -1.50E+24 7.771E+24 -89.95 -11.15 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 9.96E+07 -1.31E+07 2.57E+07 1.037E+08 -7.49 14.34 Suggested viewpoint for orthographic projection of torques on this plate is: ( 177.94E,-10.58N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.55E+16 6.52E+16 -1.24E+17 1.422E+17 207.7 Side-strength: -2.54E+17 -2.97E+17 1.30E+18 1.357E+18 13.0 Basal-strength: 2.28E+17 2.32E+17 -1.18E+18 1.220E+18 191.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 176.27E, -15.30N). ====================================================================================== plate # 11 =BS: 30 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.69E+24 -4.02E+23 3.00E+23 1.764E+24 -166.62 9.78 Velocity-Boundary-C.'s -7.41E+12 -5.93E+12 8.79E+12 1.293E+13 -141.36 42.79 ------------------------------------------------------------------------------------- Basal-Strength: -1.69E+24 -4.02E+23 3.00E+23 1.764E+24 -166.62 9.78 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.15E+25 6.65E+24 -6.37E+24 1.475E+25 30.01 -25.57 Continuum-Link [PLUG]: 6.44E+09 1.07E+09 7.52E+09 9.957E+09 9.46 49.01 ------------------------------------------------------------------------------------- Side-Strength: 1.15E+25 6.65E+24 -6.37E+24 1.475E+25 30.01 -25.57 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -9.83E+24 -6.25E+24 6.07E+24 1.313E+25 -147.55 27.51 Side-Strength: 1.15E+25 6.65E+24 -6.37E+24 1.475E+25 30.01 -25.57 Basal-Strength: -1.69E+24 -4.02E+23 3.00E+23 1.764E+24 -166.62 9.78 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.42E+07 1.92E+07 -1.96E+06 2.395E+07 126.57 -4.69 Suggested viewpoint for orthographic projection of torques on this plate is: ( 94.44E, 42.05N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.36E+18 9.79E+17 -1.20E+18 2.061E+18 141.5 Side-strength: 1.44E+18 -1.15E+18 1.40E+18 2.315E+18 324.5 Basal-strength: -7.71E+16 1.75E+17 -2.00E+17 2.769E+17 166.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 126.16E, -4.61N). ====================================================================================== plate # 12 =BU: 28 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 2.09E+25 1.86E+23 -3.88E+23 2.088E+25 0.51 -1.07 Velocity-Boundary-C.'s -5.38E+12 -2.54E+10 -3.45E+12 6.389E+12 -179.73 -32.68 ------------------------------------------------------------------------------------- Basal-Strength: 2.09E+25 1.86E+23 -3.88E+23 2.088E+25 0.51 -1.07 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -6.58E+24 3.25E+23 4.41E+24 7.928E+24 177.17 33.78 Continuum-Link [PLUG]: -4.15E+24 6.05E+23 -3.29E+24 5.330E+24 171.71 -38.13 ------------------------------------------------------------------------------------- Side-Strength: -1.07E+25 9.30E+23 1.12E+24 1.083E+25 175.05 5.92 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.01E+25 -1.12E+24 -7.29E+23 1.023E+25 -173.72 -4.08 Side-Strength: -1.07E+25 9.30E+23 1.12E+24 1.083E+25 175.05 5.92 Basal-Strength: 2.09E+25 1.86E+23 -3.88E+23 2.088E+25 0.51 -1.07 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.12E+07 -7.01E+07 -1.14E+07 7.185E+07 -80.90 -9.11 Suggested viewpoint for orthographic projection of torques on this plate is: ( 91.70E,-48.16N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.07E+17 -1.18E+18 -1.07E+18 1.606E+18 186.1 Side-strength: -2.26E+17 -1.26E+18 -1.12E+18 1.700E+18 171.1 Basal-strength: 1.89E+16 2.44E+18 2.19E+18 3.277E+18 358.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 94.11E, 9.26N). ====================================================================================== plate # 13 =CA: 82 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 9.93E+24 -1.87E+24 5.30E+25 5.398E+25 -10.67 79.21 Velocity-Boundary-C.'s 3.15E+25 1.36E+25 2.74E+25 4.388E+25 23.42 38.60 ------------------------------------------------------------------------------------- Basal-Strength: 4.14E+25 1.18E+25 8.04E+25 9.119E+25 15.86 61.84 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 6.27E+24 5.78E+24 -8.31E+25 8.356E+25 42.65 -84.14 Continuum-Link [PLUG]: 5.15E+10 -1.07E+09 -5.15E+10 7.290E+10 -1.19 -44.99 ------------------------------------------------------------------------------------- Side-Strength: 6.27E+24 5.78E+24 -8.31E+25 8.356E+25 42.65 -84.14 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.77E+25 -1.75E+25 2.73E+24 5.086E+25 -159.80 3.08 Side-Strength: 6.27E+24 5.78E+24 -8.31E+25 8.356E+25 42.65 -84.14 Basal-Strength: 4.14E+25 1.18E+25 8.04E+25 9.119E+25 15.86 61.84 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.54E+07 -4.30E+07 1.65E+07 4.856E+07 -70.28 19.81 Suggested viewpoint for orthographic projection of torques on this plate is: ( -69.92E, -2.26N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 5.11E+17 -1.47E+17 7.97E+18 7.984E+18 3.1 Side-strength: -1.23E+19 -4.44E+18 -1.24E+18 1.312E+19 264.6 Basal-strength: 1.18E+19 4.58E+18 -6.73E+18 1.431E+19 118.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -73.53E, 15.08N). ====================================================================================== plate # 14 =CL: 42 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s 4.58E+24 3.39E+23 5.02E+25 5.046E+25 4.24 84.78 ------------------------------------------------------------------------------------- Basal-Strength: 4.58E+24 3.39E+23 5.02E+25 5.046E+25 4.24 84.78 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.67E+24 -5.36E+24 -4.96E+25 5.051E+25 -145.06 -79.32 Continuum-Link [PLUG]: 2.15E+10 3.44E+10 4.29E+10 5.905E+10 57.99 46.67 ------------------------------------------------------------------------------------- Side-Strength: -7.67E+24 -5.36E+24 -4.96E+25 5.051E+25 -145.06 -79.32 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 3.09E+24 5.02E+24 -6.14E+23 5.929E+24 58.34 -5.94 Side-Strength: -7.67E+24 -5.36E+24 -4.96E+25 5.051E+25 -145.06 -79.32 Basal-Strength: 4.58E+24 3.39E+23 5.02E+25 5.046E+25 4.24 84.78 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 6.79E+06 -5.16E+06 4.71E+06 9.741E+06 -37.21 28.90 Suggested viewpoint for orthographic projection of torques on this plate is: ( 147.90E, 4.21N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.09E+17 4.58E+16 9.23E+17 9.305E+17 354.0 Side-strength: 4.07E+18 6.67E+18 -1.35E+18 7.928E+18 260.2 Basal-strength: -4.18E+18 -6.72E+18 4.25E+17 7.920E+18 86.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 140.66E, 3.27N). ====================================================================================== plate # 15 =CO: 78 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -7.16E+24 2.36E+24 9.07E+24 1.179E+25 161.78 50.26 ------------------------------------------------------------------------------------- Basal-Strength: -7.16E+24 2.36E+24 9.07E+24 1.179E+25 161.78 50.26 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 2.02E+25 -3.98E+24 -1.39E+25 2.482E+25 -11.14 -33.96 Continuum-Link [PLUG]: 4.29E+09 0.00E+00 4.29E+09 6.074E+09 0.00 45.00 ------------------------------------------------------------------------------------- Side-Strength: 2.02E+25 -3.98E+24 -1.39E+25 2.482E+25 -11.14 -33.96 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.30E+25 1.62E+24 4.80E+24 1.398E+25 172.92 20.06 Side-Strength: 2.02E+25 -3.98E+24 -1.39E+25 2.482E+25 -11.14 -33.96 Basal-Strength: -7.16E+24 2.36E+24 9.07E+24 1.179E+25 161.78 50.26 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -2.67E+05 1.63E+06 2.67E+05 1.676E+06 99.28 9.18 Suggested viewpoint for orthographic projection of torques on this plate is: ( -92.31E, 12.84N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.90E+17 4.25E+17 2.00E+18 2.195E+18 20.6 Side-strength: -2.26E+18 -6.19E+17 -3.11E+18 3.896E+18 215.0 Basal-strength: 1.47E+18 1.94E+17 1.11E+18 1.851E+18 52.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -94.37E, 8.34N). ====================================================================================== plate # 16 =CR: 11 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.29E+23 1.62E+24 -2.53E+22 1.628E+24 85.47 -0.89 Velocity-Boundary-C.'s -3.40E+12 -1.87E+13 5.24E+12 1.976E+13 -100.28 15.37 ------------------------------------------------------------------------------------- Basal-Strength: 1.29E+23 1.62E+24 -2.53E+22 1.628E+24 85.47 -0.89 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 2.99E+23 -9.14E+23 -1.16E+24 1.506E+24 -71.87 -50.33 Continuum-Link [PLUG]: 0.00E+00 -2.68E+08 -1.07E+09 1.107E+09 -90.00 -75.96 ------------------------------------------------------------------------------------- Side-Strength: 2.99E+23 -9.14E+23 -1.16E+24 1.506E+24 -71.87 -50.33 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.28E+23 -7.09E+23 1.18E+24 1.445E+24 -121.12 55.06 Side-Strength: 2.99E+23 -9.14E+23 -1.16E+24 1.506E+24 -71.87 -50.33 Basal-Strength: 1.29E+23 1.62E+24 -2.53E+22 1.628E+24 85.47 -0.89 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.23E+07 4.68E+06 -1.15E+07 3.460E+07 171.76 -19.34 Suggested viewpoint for orthographic projection of torques on this plate is: ( 175.75E,-17.52N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.03E+16 -1.97E+17 -1.11E+17 2.269E+17 120.7 Side-strength: 5.61E+16 1.87E+17 -1.33E+17 2.364E+17 233.8 Basal-strength: -7.64E+16 9.86E+15 2.44E+17 2.555E+17 359.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 174.85E, -19.11N). ====================================================================================== plate # 17 =EA: 11 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.22E+23 2.92E+23 -3.93E+23 5.376E+23 127.25 -46.93 Velocity-Boundary-C.'s 5.92E+12 -2.89E+12 2.42E+11 6.587E+12 -26.01 2.10 ------------------------------------------------------------------------------------- Basal-Strength: -2.22E+23 2.92E+23 -3.93E+23 5.376E+23 127.25 -46.93 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.59E+23 -2.39E+23 1.65E+23 4.615E+23 -33.63 20.97 Continuum-Link [PLUG]: 0.00E+00 4.36E+08 -6.38E+08 7.725E+08 90.00 -55.62 ------------------------------------------------------------------------------------- Side-Strength: 3.59E+23 -2.39E+23 1.65E+23 4.615E+23 -33.63 20.97 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.37E+23 -5.36E+22 2.28E+23 2.708E+23 -158.57 57.19 Side-Strength: 3.59E+23 -2.39E+23 1.65E+23 4.615E+23 -33.63 20.97 Basal-Strength: -2.22E+23 2.92E+23 -3.93E+23 5.376E+23 127.25 -46.93 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.38E+06 -2.37E+06 -1.69E+06 3.218E+06 -120.29 -31.63 Suggested viewpoint for orthographic projection of torques on this plate is: (-113.57E,-24.51N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.33E+16 -2.19E+16 1.48E+16 4.251E+16 67.5 Side-strength: 3.72E+16 1.39E+16 -6.06E+16 7.244E+16 156.8 Basal-strength: -7.04E+16 7.96E+15 4.58E+16 8.439E+16 306.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-113.85E, -24.61N). ====================================================================================== plate # 18 =EU: 2108 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.12E+26 2.43E+26 -3.97E+25 3.976E+26 142.07 -5.74 Velocity-Boundary-C.'s -6.83E+23 -1.95E+25 5.89E+24 2.040E+25 -92.00 16.80 ------------------------------------------------------------------------------------- Basal-Strength: -3.13E+26 2.24E+26 -3.38E+25 3.859E+26 144.43 -5.03 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.97E+26 -2.09E+26 7.89E+24 2.870E+26 -46.62 1.58 Continuum-Link [PLUG]: 4.32E+25 -8.80E+24 7.94E+23 4.407E+25 -11.52 1.03 ------------------------------------------------------------------------------------- Side-Strength: 2.40E+26 -2.17E+26 8.68E+24 3.240E+26 -42.14 1.54 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 7.25E+25 -6.33E+24 2.52E+25 7.703E+25 -4.99 19.06 Side-Strength: 2.40E+26 -2.17E+26 8.68E+24 3.240E+26 -42.14 1.54 Basal-Strength: -3.13E+26 2.24E+26 -3.38E+25 3.859E+26 144.43 -5.03 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.29E+06 8.00E+05 -3.71E+05 1.564E+06 148.23 -13.71 Suggested viewpoint for orthographic projection of torques on this plate is: (-135.00E, 61.74N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 4.46E+17 -1.13E+19 -4.14E+18 1.209E+19 136.4 Side-strength: -2.96E+19 -3.37E+19 -2.40E+19 5.086E+19 176.8 Basal-strength: 2.91E+19 4.50E+19 2.82E+19 6.058E+19 349.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 60.26E, 48.94N). ====================================================================================== plate # 19 =FT: 4 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.92E+22 9.26E+23 -5.98E+22 9.282E+23 91.18 -3.70 Velocity-Boundary-C.'s -4.83E+11 -2.98E+12 1.89E+12 3.562E+12 -99.20 32.03 ------------------------------------------------------------------------------------- Basal-Strength: -1.92E+22 9.26E+23 -5.98E+22 9.282E+23 91.18 -3.70 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -9.25E+22 -6.82E+23 4.44E+23 8.189E+23 -97.72 32.86 Continuum-Link [PLUG]: -1.51E+08 -1.34E+08 4.70E+08 5.114E+08 -138.37 66.73 ------------------------------------------------------------------------------------- Side-Strength: -9.25E+22 -6.82E+23 4.44E+23 8.189E+23 -97.72 32.86 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.12E+23 -2.44E+23 -3.84E+23 4.691E+23 -65.46 -55.05 Side-Strength: -9.25E+22 -6.82E+23 4.44E+23 8.189E+23 -97.72 32.86 Basal-Strength: -1.92E+22 9.26E+23 -5.98E+22 9.282E+23 91.18 -3.70 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.13E+07 2.35E+06 -1.12E+07 4.284E+07 176.74 -15.21 Suggested viewpoint for orthographic projection of torques on this plate is: (-177.83E,-14.90N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.66E+15 6.28E+16 -3.77E+16 7.363E+16 238.0 Side-strength: 3.01E+16 -7.11E+16 -1.03E+17 1.285E+17 145.8 Basal-strength: -3.77E+16 8.30E+15 1.40E+17 1.457E+17 356.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-177.89E, -14.96N). ====================================================================================== plate # 20 =GP: 5 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.91E+22 4.32E+21 -7.60E+22 8.553E+22 173.69 -62.62 Velocity-Boundary-C.'s 2.65E+11 -6.66E+10 -2.13E+11 3.469E+11 -14.09 -37.98 ------------------------------------------------------------------------------------- Basal-Strength: -3.91E+22 4.32E+21 -7.60E+22 8.553E+22 173.69 -62.62 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.58E+23 -3.16E+22 -1.26E+20 1.607E+23 -11.35 -0.04 Continuum-Link [PLUG]: 1.01E+08 -1.26E+07 5.03E+07 1.132E+08 -7.13 26.39 ------------------------------------------------------------------------------------- Side-Strength: 1.58E+23 -3.16E+22 -1.26E+20 1.607E+23 -11.35 -0.04 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.18E+23 2.73E+22 7.61E+22 1.434E+23 167.02 32.03 Side-Strength: 1.58E+23 -3.16E+22 -1.26E+20 1.607E+23 -11.35 -0.04 Basal-Strength: -3.91E+22 4.32E+21 -7.60E+22 8.553E+22 173.69 -62.62 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -5.53E+07 -2.65E+08 7.79E+06 2.706E+08 -101.80 1.65 Suggested viewpoint for orthographic projection of torques on this plate is: (-101.35E, 2.61N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.19E+16 -1.50E+15 1.91E+16 2.251E+16 32.1 Side-strength: -2.45E+14 -1.12E+15 -2.52E+16 2.523E+16 180.0 Basal-strength: -1.16E+16 2.62E+15 6.14E+15 1.343E+16 297.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-101.67E, 1.90N). ====================================================================================== plate # 21 =IN: 312 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.04E+23 -8.01E+22 4.97E+23 5.880E+23 -14.77 57.69 Velocity-Boundary-C.'s -6.80E+25 -2.02E+25 1.01E+26 1.232E+26 -163.42 54.84 ------------------------------------------------------------------------------------- Basal-Strength: -6.77E+25 -2.03E+25 1.01E+26 1.234E+26 -163.29 55.08 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.01E+26 1.19E+25 9.99E+24 1.027E+26 173.29 5.58 Continuum-Link [PLUG]: 2.17E+26 -9.67E+24 -8.12E+25 2.321E+26 -2.55 -20.47 ------------------------------------------------------------------------------------- Side-Strength: 1.16E+26 2.28E+24 -7.12E+25 1.359E+26 1.13 -31.59 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.80E+25 1.80E+25 -3.00E+25 5.944E+25 159.41 -30.33 Side-Strength: 1.16E+26 2.28E+24 -7.12E+25 1.359E+26 1.13 -31.59 Basal-Strength: -6.77E+25 -2.03E+25 1.01E+26 1.234E+26 -163.29 55.08 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.46E+06 -2.69E+06 7.66E+05 3.158E+06 -118.51 14.04 Suggested viewpoint for orthographic projection of torques on this plate is: ( 80.00E, 17.43N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 5.27E+18 1.48E+18 -7.55E+18 9.330E+18 212.0 Side-strength: 1.06E+19 -7.29E+18 1.70E+19 2.132E+19 326.7 Basal-strength: -1.59E+19 5.81E+18 -9.45E+18 1.937E+19 120.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 78.65E, 14.95N). ====================================================================================== plate # 22 =JF: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s 4.48E+24 6.80E+24 7.60E+24 1.114E+25 56.62 43.02 ------------------------------------------------------------------------------------- Basal-Strength: 4.48E+24 6.80E+24 7.60E+24 1.114E+25 56.62 43.02 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -4.05E+24 -7.00E+24 -7.42E+24 1.098E+25 -120.07 -42.55 Continuum-Link [PLUG]: -1.07E+09 1.07E+09 -1.07E+09 1.860E+09 135.00 -35.26 ------------------------------------------------------------------------------------- Side-Strength: -4.05E+24 -7.00E+24 -7.42E+24 1.098E+25 -120.07 -42.55 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.31E+23 1.96E+23 -1.78E+23 5.053E+23 155.55 -20.61 Side-Strength: -4.05E+24 -7.00E+24 -7.42E+24 1.098E+25 -120.07 -42.55 Basal-Strength: 4.48E+24 6.80E+24 7.60E+24 1.114E+25 56.62 43.02 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.23E+07 4.27E+07 -4.47E+07 6.970E+07 52.89 -39.87 Suggested viewpoint for orthographic projection of torques on this plate is: (-137.46E, 46.11N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 9.05E+15 6.30E+16 4.74E+16 7.932E+16 329.5 Side-strength: -1.34E+18 1.05E+18 -2.63E+17 1.723E+18 257.3 Basal-strength: 1.33E+18 -1.12E+18 2.16E+17 1.749E+18 79.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-127.50E, 45.49N). ====================================================================================== plate # 23 =JZ: 8 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -6.30E+23 2.80E+23 -4.69E+22 6.908E+23 156.05 -3.90 Velocity-Boundary-C.'s 6.04E+11 -9.67E+11 1.10E+12 1.584E+12 -58.01 43.97 ------------------------------------------------------------------------------------- Basal-Strength: -6.30E+23 2.80E+23 -4.69E+22 6.908E+23 156.05 -3.90 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 5.65E+23 -1.31E+23 -1.30E+23 5.947E+23 -13.00 -12.62 Continuum-Link [PLUG]: 2.01E+08 -1.68E+07 -1.34E+08 2.425E+08 -4.76 -33.60 ------------------------------------------------------------------------------------- Side-Strength: 5.65E+23 -1.31E+23 -1.30E+23 5.947E+23 -13.00 -12.62 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.44E+22 -1.49E+23 1.77E+23 2.402E+23 -66.65 47.42 Side-Strength: 5.65E+23 -1.31E+23 -1.30E+23 5.947E+23 -13.00 -12.62 Basal-Strength: -6.30E+23 2.80E+23 -4.69E+22 6.908E+23 156.05 -3.90 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.07E+06 1.64E+07 1.12E+07 2.046E+07 72.79 33.07 Suggested viewpoint for orthographic projection of torques on this plate is: (-111.40E,-33.13N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 3.44E+16 -2.96E+15 -1.50E+16 3.771E+16 118.4 Side-strength: -4.71E+15 5.47E+16 -7.55E+16 9.334E+16 195.1 Basal-strength: -2.97E+16 -5.18E+16 9.05E+16 1.084E+17 355.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-110.92E, -33.34N). ====================================================================================== plate # 24 =KE: 33 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 4.24E+24 -2.66E+24 -3.68E+24 6.217E+24 -32.04 -36.34 Velocity-Boundary-C.'s -3.95E+13 -4.76E+13 6.71E+13 9.126E+13 -129.71 47.31 ------------------------------------------------------------------------------------- Basal-Strength: 4.24E+24 -2.66E+24 -3.68E+24 6.217E+24 -32.04 -36.34 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.13E+25 8.54E+24 -2.03E+25 2.476E+25 36.98 -55.00 Continuum-Link [PLUG]: -6.44E+09 1.40E+10 8.59E+09 1.761E+10 114.78 29.19 ------------------------------------------------------------------------------------- Side-Strength: 1.13E+25 8.54E+24 -2.03E+25 2.476E+25 36.98 -55.00 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.56E+25 -5.89E+24 2.40E+25 2.919E+25 -159.32 55.18 Side-Strength: 1.13E+25 8.54E+24 -2.03E+25 2.476E+25 36.98 -55.00 Basal-Strength: 4.24E+24 -2.66E+24 -3.68E+24 6.217E+24 -32.04 -36.34 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 4.29E+07 -3.05E+05 2.59E+07 5.013E+07 -0.41 31.09 Suggested viewpoint for orthographic projection of torques on this plate is: (-152.57E,-34.63N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.95E+18 -4.14E+18 2.53E+17 4.582E+18 86.2 Side-strength: -1.97E+18 3.34E+18 3.04E+17 3.886E+18 275.5 Basal-strength: 1.78E+16 8.01E+17 -5.57E+17 9.758E+17 226.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-179.62E, -33.55N). ====================================================================================== plate # 25 =MA: 27 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 7.16E+24 -9.63E+23 2.00E+25 2.127E+25 -7.66 70.15 Velocity-Boundary-C.'s 2.51E+12 -2.59E+13 6.45E+13 6.953E+13 -84.47 68.03 ------------------------------------------------------------------------------------- Basal-Strength: 7.16E+24 -9.63E+23 2.00E+25 2.127E+25 -7.66 70.15 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -8.90E+24 1.17E+24 -2.42E+25 2.582E+25 172.48 -69.66 Continuum-Link [PLUG]: -3.22E+09 5.77E+09 -3.01E+10 3.078E+10 119.17 -77.60 ------------------------------------------------------------------------------------- Side-Strength: -8.90E+24 1.17E+24 -2.42E+25 2.582E+25 172.48 -69.66 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.74E+24 -2.12E+23 4.20E+24 4.554E+24 -6.95 67.37 Side-Strength: -8.90E+24 1.17E+24 -2.42E+25 2.582E+25 172.48 -69.66 Basal-Strength: 7.16E+24 -9.63E+23 2.00E+25 2.127E+25 -7.66 70.15 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.53E+06 4.41E+05 7.99E+06 8.147E+06 16.11 78.76 Suggested viewpoint for orthographic projection of torques on this plate is: ( 87.63E, 1.90N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -6.60E+17 1.82E+16 2.74E+17 7.147E+17 67.4 Side-strength: 3.80E+18 -1.11E+17 -1.40E+18 4.053E+18 249.7 Basal-strength: -3.14E+18 9.27E+16 1.13E+18 3.339E+18 70.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 145.30E, 17.93N). ====================================================================================== plate # 26 =MN: 4 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.24E+23 2.27E+23 2.85E+22 2.601E+23 61.23 6.29 Velocity-Boundary-C.'s 1.59E+11 3.28E+11 3.97E+11 5.391E+11 64.14 47.49 ------------------------------------------------------------------------------------- Basal-Strength: 1.24E+23 2.27E+23 2.85E+22 2.601E+23 61.23 6.29 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -7.47E+22 -1.56E+23 -1.72E+23 2.433E+23 -115.65 -44.85 Continuum-Link [PLUG]: 7.97E+08 1.41E+09 -6.71E+08 1.753E+09 60.51 -22.51 ------------------------------------------------------------------------------------- Side-Strength: -7.47E+22 -1.56E+23 -1.72E+23 2.433E+23 -115.65 -44.85 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.98E+22 -7.11E+22 1.43E+23 1.674E+23 -124.98 58.76 Side-Strength: -7.47E+22 -1.56E+23 -1.72E+23 2.433E+23 -115.65 -44.85 Basal-Strength: 1.24E+23 2.27E+23 2.85E+22 2.601E+23 61.23 6.29 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -6.01E+08 3.45E+08 -4.21E+07 6.942E+08 150.11 -3.47 Suggested viewpoint for orthographic projection of torques on this plate is: ( 150.84E, -3.52N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.02E+16 -2.01E+16 -1.35E+16 2.628E+16 121.1 Side-strength: 1.46E+16 2.28E+16 -2.70E+16 3.819E+16 225.0 Basal-strength: -4.36E+15 -2.70E+15 4.05E+16 4.083E+16 6.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 150.49E, -3.55N). ====================================================================================== plate # 27 =MO: 10 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -5.85E+23 -2.13E+23 3.38E+24 3.438E+24 -159.98 79.57 Velocity-Boundary-C.'s 1.98E+13 2.63E+13 4.51E+13 5.581E+13 53.02 53.92 ------------------------------------------------------------------------------------- Basal-Strength: -5.85E+23 -2.13E+23 3.38E+24 3.438E+24 -159.98 79.57 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -4.82E+24 -6.05E+24 -6.23E+24 9.931E+24 -128.55 -38.85 Continuum-Link [PLUG]: -2.15E+09 -1.07E+09 -6.44E+09 6.875E+09 -153.43 -69.56 ------------------------------------------------------------------------------------- Side-Strength: -4.82E+24 -6.05E+24 -6.23E+24 9.931E+24 -128.55 -38.85 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.40E+24 6.26E+24 2.85E+24 8.748E+24 49.20 19.00 Side-Strength: -4.82E+24 -6.05E+24 -6.23E+24 9.931E+24 -128.55 -38.85 Basal-Strength: -5.85E+23 -2.13E+23 3.38E+24 3.438E+24 -159.98 79.57 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.51E+08 1.34E+08 -7.39E+06 2.026E+08 138.39 -2.09 Suggested viewpoint for orthographic projection of torques on this plate is: ( 137.53E, -4.86N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -3.84E+17 -2.57E+17 1.29E+18 1.373E+18 19.1 Side-strength: 7.38E+17 6.54E+17 -1.21E+18 1.559E+18 219.0 Basal-strength: -3.54E+17 -3.98E+17 -8.63E+16 5.397E+17 99.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 137.94E, -3.44N). ====================================================================================== plate # 28 =MS: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.47E+25 9.39E+24 -4.16E+24 1.796E+25 32.49 -13.40 Velocity-Boundary-C.'s 1.68E+12 9.86E+11 -3.04E+11 1.976E+12 30.34 -8.86 ------------------------------------------------------------------------------------- Basal-Strength: 1.47E+25 9.39E+24 -4.16E+24 1.796E+25 32.49 -13.40 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.57E+25 -9.62E+24 3.22E+24 1.867E+25 -148.48 9.93 Continuum-Link [PLUG]: 0.00E+00 -1.07E+09 -3.76E+09 3.908E+09 -90.00 -74.05 ------------------------------------------------------------------------------------- Side-Strength: -1.57E+25 -9.62E+24 3.22E+24 1.867E+25 -148.48 9.93 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 9.39E+23 2.29E+23 9.44E+23 1.351E+24 13.73 44.34 Side-Strength: -1.57E+25 -9.62E+24 3.22E+24 1.867E+25 -148.48 9.93 Basal-Strength: 1.47E+25 9.39E+24 -4.16E+24 1.796E+25 32.49 -13.40 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.36E+07 -2.37E+07 -9.23E+05 3.343E+07 -45.05 -1.58 Suggested viewpoint for orthographic projection of torques on this plate is: ( 118.85E, 14.94N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.16E+17 -1.07E+17 1.41E+17 2.120E+17 46.3 Side-strength: -8.17E+17 3.99E+17 -2.79E+18 2.931E+18 169.7 Basal-strength: 9.33E+17 -2.92E+17 2.64E+18 2.820E+18 346.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 123.34E, -1.07N). ====================================================================================== plate # 29 =NA: 1860 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -4.21E+25 -1.87E+26 -1.12E+26 2.220E+26 -102.67 -30.19 Velocity-Boundary-C.'s -2.45E+25 -1.07E+25 8.47E+24 2.806E+25 -156.35 17.56 ------------------------------------------------------------------------------------- Basal-Strength: -6.66E+25 -1.98E+26 -1.03E+26 2.330E+26 -108.59 -26.29 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.48E+25 1.45E+26 9.39E+25 1.812E+26 110.71 31.23 Continuum-Link [PLUG]: 4.53E+25 4.93E+25 -3.80E+24 6.707E+25 47.46 -3.25 ------------------------------------------------------------------------------------- Side-Strength: -9.50E+24 1.94E+26 9.01E+25 2.144E+26 92.80 24.87 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 7.61E+25 3.74E+24 1.31E+25 7.729E+25 2.81 9.72 Side-Strength: -9.50E+24 1.94E+26 9.01E+25 2.144E+26 92.80 24.87 Basal-Strength: -6.66E+25 -1.98E+26 -1.03E+26 2.330E+26 -108.59 -26.29 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.74E+05 -7.21E+05 -2.06E+05 7.700E+05 -103.60 -15.54 Suggested viewpoint for orthographic projection of torques on this plate is: (-107.47E, 63.71N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.39E+18 -1.10E+19 -4.97E+18 1.213E+19 157.6 Side-strength: 3.33E+19 -5.45E+17 4.69E+18 3.365E+19 71.7 Basal-strength: -3.47E+19 1.15E+19 2.82E+17 3.657E+19 271.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-104.07E, 53.48N). ====================================================================================== plate # 30 =NB: 21 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.66E+24 6.52E+24 -1.12E+25 1.349E+25 60.69 -56.32 Velocity-Boundary-C.'s -2.38E+24 -3.32E+24 -3.58E+24 5.430E+24 -125.66 -41.19 ------------------------------------------------------------------------------------- Basal-Strength: 1.28E+24 3.20E+24 -1.48E+25 1.520E+25 68.21 -76.88 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -3.23E+24 -5.65E+24 1.24E+25 1.401E+25 -119.77 62.29 Continuum-Link [PLUG]: 1.07E+09 0.00E+00 -8.59E+09 8.657E+09 0.00 -82.87 ------------------------------------------------------------------------------------- Side-Strength: -3.23E+24 -5.65E+24 1.24E+25 1.401E+25 -119.77 62.29 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 1.95E+24 2.45E+24 2.40E+24 3.949E+24 51.43 37.50 Side-Strength: -3.23E+24 -5.65E+24 1.24E+25 1.401E+25 -119.77 62.29 Basal-Strength: 1.28E+24 3.20E+24 -1.48E+25 1.520E+25 68.21 -76.88 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.09E+08 6.79E+07 -1.18E+07 1.285E+08 147.97 -5.25 Suggested viewpoint for orthographic projection of torques on this plate is: ( 143.96E, 3.28N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.00E+17 -3.22E+17 4.90E+17 6.198E+17 37.6 Side-strength: -1.19E+18 -1.54E+18 -1.01E+18 2.198E+18 117.5 Basal-strength: 1.39E+18 1.86E+18 5.24E+17 2.386E+18 282.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.39E, -2.80N). ====================================================================================== plate # 31 =ND: 37 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 4.34E+23 7.33E+23 2.46E+25 2.464E+25 59.38 88.02 Velocity-Boundary-C.'s 1.27E+12 -2.35E+12 -8.19E+12 8.612E+12 -61.65 -71.97 ------------------------------------------------------------------------------------- Basal-Strength: 4.34E+23 7.33E+23 2.46E+25 2.464E+25 59.38 88.02 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.63E+25 5.21E+24 -8.55E+24 1.916E+25 17.70 -26.51 Continuum-Link [PLUG]: 1.50E+10 2.15E+09 -6.44E+09 1.650E+10 8.13 -22.99 ------------------------------------------------------------------------------------- Side-Strength: 1.63E+25 5.21E+24 -8.55E+24 1.916E+25 17.70 -26.51 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.68E+25 -5.95E+24 -1.61E+25 2.398E+25 -160.47 -42.10 Side-Strength: 1.63E+25 5.21E+24 -8.55E+24 1.916E+25 17.70 -26.51 Basal-Strength: 4.34E+23 7.33E+23 2.46E+25 2.464E+25 59.38 88.02 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.06E+07 -3.97E+07 8.60E+06 4.202E+07 -75.05 11.81 Suggested viewpoint for orthographic projection of torques on this plate is: ( -71.65E, 1.30N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.42E+18 -7.35E+17 2.79E+18 3.764E+18 317.9 Side-strength: -1.26E+18 -4.81E+17 -2.69E+18 3.007E+18 206.5 Basal-strength: 3.67E+18 1.22E+18 -1.01E+17 3.868E+18 91.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -75.49E, 5.94N). ====================================================================================== plate # 32 =NH: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 5.41E+24 1.23E+24 -1.52E+25 1.618E+25 12.83 -69.97 Velocity-Boundary-C.'s -1.34E+13 4.59E+12 3.77E+13 4.025E+13 161.12 69.37 ------------------------------------------------------------------------------------- Basal-Strength: 5.41E+24 1.23E+24 -1.52E+25 1.618E+25 12.83 -69.97 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -4.94E+24 2.36E+24 1.49E+25 1.585E+25 154.46 69.78 Continuum-Link [PLUG]: 3.22E+09 -1.61E+09 -2.15E+09 4.193E+09 -26.57 -30.81 ------------------------------------------------------------------------------------- Side-Strength: -4.94E+24 2.36E+24 1.49E+25 1.585E+25 154.46 69.78 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.63E+23 -3.59E+24 3.34E+23 3.638E+24 -97.34 5.27 Side-Strength: -4.94E+24 2.36E+24 1.49E+25 1.585E+25 154.46 69.78 Basal-Strength: 5.41E+24 1.23E+24 -1.52E+25 1.618E+25 12.83 -69.97 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.84E+07 -2.58E+06 1.83E+06 1.863E+07 -7.99 5.63 Suggested viewpoint for orthographic projection of torques on this plate is: ( 174.49E,-19.09N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.80E+17 -7.31E+16 -5.37E+17 5.710E+17 174.4 Side-strength: -3.33E+17 -2.45E+18 2.78E+17 2.487E+18 83.2 Basal-strength: 1.53E+17 2.52E+18 2.59E+17 2.540E+18 276.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 170.38E, -17.83N). ====================================================================================== plate # 33 =NI: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 7.78E+23 -3.83E+24 -1.68E+24 4.250E+24 -78.51 -23.22 Velocity-Boundary-C.'s 3.72E+12 -5.32E+13 8.50E+11 5.338E+13 -86.01 0.91 ------------------------------------------------------------------------------------- Basal-Strength: 7.78E+23 -3.83E+24 -1.68E+24 4.250E+24 -78.51 -23.22 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -3.44E+23 3.79E+24 1.81E+23 3.814E+24 95.17 2.72 Continuum-Link [PLUG]: 2.01E+08 -1.07E+09 -8.05E+08 1.357E+09 -79.38 -36.40 ------------------------------------------------------------------------------------- Side-Strength: -3.44E+23 3.79E+24 1.81E+23 3.814E+24 95.17 2.72 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.35E+23 3.27E+22 1.49E+24 1.557E+24 175.69 73.74 Side-Strength: -3.44E+23 3.79E+24 1.81E+23 3.814E+24 95.17 2.72 Basal-Strength: 7.78E+23 -3.83E+24 -1.68E+24 4.250E+24 -78.51 -23.22 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -2.28E+07 -6.61E+06 -9.28E+06 2.550E+07 -163.85 -21.35 Suggested viewpoint for orthographic projection of torques on this plate is: (-175.61E,-16.08N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 1.58E+16 -2.44E+17 9.94E+15 2.444E+17 87.6 Side-strength: -1.63E+17 -4.22E+16 5.75E+17 5.987E+17 2.8 Basal-strength: 1.47E+17 2.86E+17 -5.84E+17 6.670E+17 204.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-175.80E, -16.91N). ====================================================================================== plate # 34 =NZ: 390 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -1.16E+23 -7.98E+24 1.38E+25 1.591E+25 -90.83 59.89 ------------------------------------------------------------------------------------- Basal-Strength: -1.16E+23 -7.98E+24 1.38E+25 1.591E+25 -90.83 59.89 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.55E+24 1.96E+25 -4.67E+25 5.090E+25 76.97 -66.67 Continuum-Link [PLUG]: 5.91E+09 -1.29E+10 0.00E+00 1.417E+10 -65.38 0.00 ------------------------------------------------------------------------------------- Side-Strength: 4.55E+24 1.96E+25 -4.67E+25 5.090E+25 76.97 -66.67 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -4.43E+24 -1.17E+25 3.30E+25 3.525E+25 -110.81 69.29 Side-Strength: 4.55E+24 1.96E+25 -4.67E+25 5.090E+25 76.97 -66.67 Basal-Strength: -1.16E+23 -7.98E+24 1.38E+25 1.591E+25 -90.83 59.89 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.54E+04 -4.35E+05 1.12E+04 4.351E+05 -92.03 1.48 Suggested viewpoint for orthographic projection of torques on this plate is: (-150.91E,-16.13N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 2.93E+18 -4.54E+18 -1.21E+18 5.534E+18 103.2 Side-strength: -4.28E+18 6.36E+18 2.25E+18 7.989E+18 287.1 Basal-strength: 1.36E+18 -1.82E+18 -1.04E+18 2.497E+18 115.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -92.39E, -19.89N). ====================================================================================== plate # 35 =OK: 90 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.03E+25 3.67E+25 -4.19E+24 4.780E+25 50.40 -5.03 Velocity-Boundary-C.'s 2.36E+13 9.39E+12 1.80E+13 3.117E+13 21.68 35.34 ------------------------------------------------------------------------------------- Basal-Strength: 3.03E+25 3.67E+25 -4.19E+24 4.780E+25 50.40 -5.03 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.89E+25 1.26E+25 -2.02E+25 3.742E+25 156.47 -32.59 Continuum-Link [PLUG]: -9.93E+24 6.27E+24 -5.65E+24 1.304E+25 147.73 -25.70 ------------------------------------------------------------------------------------- Side-Strength: -3.88E+25 1.89E+25 -2.58E+25 5.030E+25 154.10 -30.87 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 8.49E+24 -5.56E+25 3.00E+25 6.370E+25 -81.31 28.09 Side-Strength: -3.88E+25 1.89E+25 -2.58E+25 5.030E+25 154.10 -30.87 Basal-Strength: 3.03E+25 3.67E+25 -4.19E+24 4.780E+25 50.40 -5.03 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.28E+07 -4.78E+06 -1.61E+07 2.114E+07 -20.51 -49.82 Suggested viewpoint for orthographic projection of torques on this plate is: ( 132.54E, 57.27N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -9.21E+18 -2.84E+18 -2.66E+18 9.999E+18 119.4 Side-strength: 4.10E+18 6.61E+18 -1.35E+18 7.896E+18 251.6 Basal-strength: 5.11E+18 -3.77E+18 4.00E+18 7.502E+18 350.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.52E, 51.90N). ====================================================================================== plate # 36 =ON: 21 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.57E+23 -4.90E+24 8.58E+24 9.886E+24 -88.16 60.26 Velocity-Boundary-C.'s 5.93E+12 1.48E+12 5.92E+12 8.511E+12 14.05 44.10 ------------------------------------------------------------------------------------- Basal-Strength: 1.57E+23 -4.90E+24 8.58E+24 9.886E+24 -88.16 60.26 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.48E+24 1.01E+25 -1.47E+25 1.788E+25 81.66 -55.10 Continuum-Link [PLUG]: -5.10E+09 -2.15E+09 -6.44E+09 8.493E+09 -157.17 -49.34 ------------------------------------------------------------------------------------- Side-Strength: 1.48E+24 1.01E+25 -1.47E+25 1.788E+25 81.66 -55.10 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.64E+24 -5.22E+24 6.08E+24 8.181E+24 -107.46 48.02 Side-Strength: 1.48E+24 1.01E+25 -1.47E+25 1.788E+25 81.66 -55.10 Basal-Strength: 1.57E+23 -4.90E+24 8.58E+24 9.886E+24 -88.16 60.26 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.00E+07 3.62E+07 2.93E+07 5.538E+07 129.62 31.91 Suggested viewpoint for orthographic projection of torques on this plate is: ( 134.90E, 22.66N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -9.40E+17 -5.22E+17 -7.02E+17 1.284E+18 126.3 Side-strength: 2.12E+18 1.41E+18 1.19E+18 2.807E+18 297.3 Basal-strength: -1.18E+18 -8.87E+17 -4.85E+17 1.552E+18 109.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 127.68E, 27.18N). ====================================================================================== plate # 37 =PA: 2930 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -5.01E+20 -8.85E+20 -1.47E+21 1.788E+21 -119.50 -55.34 Velocity-Boundary-C.'s 4.47E+25 1.59E+26 -6.38E+25 1.770E+26 74.31 -21.11 ------------------------------------------------------------------------------------- Basal-Strength: 4.47E+25 1.59E+26 -6.38E+25 1.770E+26 74.31 -21.11 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -3.76E+25 -2.08E+26 1.99E+26 2.908E+26 -100.23 43.30 Continuum-Link [PLUG]: 1.58E+24 -9.68E+23 -1.08E+23 1.858E+24 -31.45 -3.35 ------------------------------------------------------------------------------------- Side-Strength: -3.60E+25 -2.09E+26 1.99E+26 2.913E+26 -99.77 43.19 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -8.64E+24 5.03E+25 -1.36E+26 1.448E+26 99.75 -69.38 Side-Strength: -3.60E+25 -2.09E+26 1.99E+26 2.913E+26 -99.77 43.19 Basal-Strength: 4.47E+25 1.59E+26 -6.38E+25 1.770E+26 74.31 -21.11 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 2.92E+05 3.74E+05 -1.23E+05 4.898E+05 52.04 -14.53 Suggested viewpoint for orthographic projection of torques on this plate is: ( 160.20E, 10.52N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 8.53E+18 1.99E+19 6.85E+18 2.274E+19 287.8 Side-strength: -1.64E+19 -2.79E+19 -3.23E+19 4.572E+19 135.9 Basal-strength: 7.89E+18 7.98E+18 2.54E+19 2.779E+19 338.5 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-147.60E, 11.97N). ====================================================================================== plate # 38 =PM: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -1.26E+25 -1.46E+24 3.26E+24 1.313E+25 -173.39 14.36 Velocity-Boundary-C.'s 2.82E+12 9.83E+11 4.31E+12 5.248E+12 19.20 55.27 ------------------------------------------------------------------------------------- Basal-Strength: -1.26E+25 -1.46E+24 3.26E+24 1.313E+25 -173.39 14.36 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 1.38E+25 1.92E+24 -1.93E+24 1.410E+25 7.92 -7.88 Continuum-Link [PLUG]: -2.15E+09 2.68E+08 4.56E+09 5.051E+09 172.87 64.63 ------------------------------------------------------------------------------------- Side-Strength: 1.38E+25 1.92E+24 -1.93E+24 1.410E+25 7.92 -7.88 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.20E+24 -4.61E+23 -1.32E+24 1.845E+24 -159.02 -45.77 Side-Strength: 1.38E+25 1.92E+24 -1.93E+24 1.410E+25 7.92 -7.88 Basal-Strength: -1.26E+25 -1.46E+24 3.26E+24 1.313E+25 -173.39 14.36 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -7.36E+06 -3.09E+06 2.33E+06 8.314E+06 -157.20 16.28 Suggested viewpoint for orthographic projection of torques on this plate is: ( -80.54E, 11.00N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -2.15E+17 2.51E+15 1.94E+17 2.896E+17 313.1 Side-strength: -2.36E+17 -4.63E+17 -2.15E+18 2.214E+18 188.0 Basal-strength: 4.51E+17 4.61E+17 1.96E+18 2.061E+18 14.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -81.25E, 8.79N). ====================================================================================== plate # 39 =PS: 248 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.28E+22 5.60E+21 3.89E+22 5.118E+22 9.67 49.39 Velocity-Boundary-C.'s 3.97E+24 1.90E+25 -5.37E+25 5.707E+25 78.19 -70.11 ------------------------------------------------------------------------------------- Basal-Strength: 4.01E+24 1.90E+25 -5.36E+25 5.703E+25 78.10 -70.08 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.65E+23 -1.12E+25 3.43E+25 3.606E+25 -90.85 71.98 Continuum-Link [PLUG]: -1.12E+25 -1.01E+25 9.07E+24 1.758E+25 -138.11 31.06 ------------------------------------------------------------------------------------- Side-Strength: -1.14E+25 -2.12E+25 4.34E+25 4.960E+25 -118.21 60.97 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 7.37E+24 2.20E+24 1.03E+25 1.282E+25 16.61 53.13 Side-Strength: -1.14E+25 -2.12E+25 4.34E+25 4.960E+25 -118.21 60.97 Basal-Strength: 4.01E+24 1.90E+25 -5.36E+25 5.703E+25 78.10 -70.08 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 4.84E+06 -4.40E+06 -3.86E+06 7.591E+06 -42.30 -30.53 Suggested viewpoint for orthographic projection of torques on this plate is: ( 125.64E, 13.75N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.19E+18 -1.19E+18 1.11E+18 2.012E+18 55.4 Side-strength: -6.16E+18 -3.43E+18 -3.29E+18 7.785E+18 115.8 Basal-strength: 7.35E+18 4.61E+18 2.19E+18 8.952E+18 284.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 128.06E, 17.86N). ====================================================================================== plate # 40 =RI: 12 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s -4.45E+24 3.42E+24 5.27E+24 7.696E+24 142.47 43.18 ------------------------------------------------------------------------------------- Basal-Strength: -4.45E+24 3.42E+24 5.27E+24 7.696E+24 142.47 43.18 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 4.06E+24 -3.48E+24 -5.83E+24 7.912E+24 -40.59 -47.43 Continuum-Link [PLUG]: -2.15E+09 3.22E+09 6.44E+09 7.516E+09 123.69 59.00 ------------------------------------------------------------------------------------- Side-Strength: 4.06E+24 -3.48E+24 -5.83E+24 7.912E+24 -40.59 -47.43 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 3.86E+23 6.34E+22 5.61E+23 6.839E+23 9.31 55.07 Side-Strength: 4.06E+24 -3.48E+24 -5.83E+24 7.912E+24 -40.59 -47.43 Basal-Strength: -4.45E+24 3.42E+24 5.27E+24 7.696E+24 142.47 43.18 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.12E+06 2.39E+07 1.12E+06 2.398E+07 92.69 2.67 Suggested viewpoint for orthographic projection of torques on this plate is: (-109.26E, 18.47N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 8.20E+16 -4.67E+16 -5.12E+16 1.073E+17 120.2 Side-strength: -9.92E+17 8.40E+16 -7.42E+17 1.242E+18 230.9 Basal-strength: 9.10E+17 -3.72E+16 7.93E+17 1.208E+18 46.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-106.85E, 19.42N). ====================================================================================== plate # 41 =SA: 1670 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 1.16E+26 1.65E+26 -2.13E+26 2.931E+26 54.86 -46.58 Velocity-Boundary-C.'s -1.04E+25 -3.79E+24 5.02E+25 5.136E+25 -160.03 77.54 ------------------------------------------------------------------------------------- Basal-Strength: 1.06E+26 1.61E+26 -1.63E+26 2.520E+26 56.75 -40.22 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -3.84E+25 -1.15E+26 1.48E+26 1.913E+26 -108.45 50.68 Continuum-Link [PLUG]: -5.93E+25 -4.64E+25 1.43E+25 7.660E+25 -141.95 10.72 ------------------------------------------------------------------------------------- Side-Strength: -9.76E+25 -1.61E+26 1.62E+26 2.488E+26 -121.18 40.70 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -7.88E+24 4.14E+23 5.12E+23 7.911E+24 176.99 3.71 Side-Strength: -9.76E+25 -1.61E+26 1.62E+26 2.488E+26 -121.18 40.70 Basal-Strength: 1.06E+26 1.61E+26 -1.63E+26 2.520E+26 56.75 -40.22 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 7.09E+05 3.90E+05 -8.52E+05 1.175E+06 28.78 -46.46 Suggested viewpoint for orthographic projection of torques on this plate is: ( -96.95E,-46.67N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.50E+15 -9.07E+17 8.48E+17 1.242E+18 5.4 Side-strength: 3.58E+19 -1.33E+19 8.33E+18 3.905E+19 71.9 Basal-strength: -3.58E+19 1.42E+19 -9.18E+18 3.956E+19 250.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -55.68E, -25.40N). ====================================================================================== plate # 42 =SB: 17 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.23E+24 -4.45E+24 1.51E+24 5.202E+24 -116.59 16.92 Velocity-Boundary-C.'s 8.69E+12 9.64E+12 -1.11E+13 1.708E+13 47.98 -40.56 ------------------------------------------------------------------------------------- Basal-Strength: -2.23E+24 -4.45E+24 1.51E+24 5.202E+24 -116.59 16.92 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 5.87E+24 1.02E+25 -3.80E+24 1.235E+25 60.03 -17.93 Continuum-Link [PLUG]: -1.07E+10 -1.72E+10 -5.91E+09 2.110E+10 -122.01 -16.25 ------------------------------------------------------------------------------------- Side-Strength: 5.87E+24 1.02E+25 -3.80E+24 1.235E+25 60.03 -17.93 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.64E+24 -5.73E+24 2.29E+24 7.165E+24 -122.45 18.63 Side-Strength: 5.87E+24 1.02E+25 -3.80E+24 1.235E+25 60.03 -17.93 Basal-Strength: -2.23E+24 -4.45E+24 1.51E+24 5.202E+24 -116.59 16.92 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.27E+08 -7.97E+07 1.40E+07 1.503E+08 -32.19 5.34 Suggested viewpoint for orthographic projection of torques on this plate is: (-164.47E,-65.60N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 8.59E+17 -6.64E+17 -2.95E+17 1.125E+18 129.4 Side-strength: -1.52E+18 1.08E+18 5.34E+17 1.939E+18 311.8 Basal-strength: 6.62E+17 -4.13E+17 -2.39E+17 8.166E+17 135.2 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 149.32E, -4.97N). ====================================================================================== plate # 43 =SC: 58 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -3.46E+24 -2.03E+25 8.32E+24 2.223E+25 -99.65 21.98 Velocity-Boundary-C.'s 5.73E+12 3.22E+12 1.52E+12 6.743E+12 29.32 13.01 ------------------------------------------------------------------------------------- Basal-Strength: -3.46E+24 -2.03E+25 8.32E+24 2.223E+25 -99.65 21.98 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -2.36E+24 1.81E+25 -8.53E+24 2.013E+25 97.45 -25.06 Continuum-Link [PLUG]: -2.47E+10 1.07E+10 -3.01E+10 4.036E+10 156.50 -48.15 ------------------------------------------------------------------------------------- Side-Strength: -2.36E+24 1.81E+25 -8.53E+24 2.013E+25 97.45 -25.06 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 5.82E+24 2.24E+24 2.05E+23 6.241E+24 21.07 1.88 Side-Strength: -2.36E+24 1.81E+25 -8.53E+24 2.013E+25 97.45 -25.06 Basal-Strength: -3.46E+24 -2.03E+25 8.32E+24 2.223E+25 -99.65 21.98 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.19E+05 -2.65E+06 -8.20E+05 2.794E+06 -83.15 -17.07 Suggested viewpoint for orthographic projection of torques on this plate is: ( -65.09E,-63.88N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -3.03E+17 8.26E+17 -4.30E+17 9.796E+17 175.7 Side-strength: -3.08E+18 -5.81E+17 -3.78E+17 3.159E+18 254.2 Basal-strength: 3.39E+18 -2.45E+17 8.08E+17 3.489E+18 58.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -51.21E, -57.35N). ====================================================================================== plate # 44 =SL: 6 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.42E+24 -1.28E+24 -4.95E+22 2.737E+24 -152.03 -1.04 Velocity-Boundary-C.'s -1.77E+11 -3.39E+11 1.09E+11 3.978E+11 -117.55 15.91 ------------------------------------------------------------------------------------- Basal-Strength: -2.42E+24 -1.28E+24 -4.95E+22 2.737E+24 -152.03 -1.04 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.66E+24 7.23E+23 6.44E+23 3.781E+24 11.20 9.80 Continuum-Link [PLUG]: 0.00E+00 5.37E+08 0.00E+00 5.369E+08 90.00 0.00 ------------------------------------------------------------------------------------- Side-Strength: 3.66E+24 7.23E+23 6.44E+23 3.781E+24 11.20 9.80 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -1.24E+24 5.60E+23 -5.94E+23 1.483E+24 155.64 -23.63 Side-Strength: 3.66E+24 7.23E+23 6.44E+23 3.781E+24 11.20 9.80 Basal-Strength: -2.42E+24 -1.28E+24 -4.95E+22 2.737E+24 -152.03 -1.04 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -3.44E+07 4.49E+07 1.05E+08 1.188E+08 127.44 61.59 Suggested viewpoint for orthographic projection of torques on this plate is: ( -60.10E,-61.67N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.16E+17 -1.93E+17 5.91E+16 2.328E+17 302.4 Side-strength: -5.84E+16 5.29E+17 -2.63E+17 5.935E+17 159.0 Basal-strength: 1.74E+17 -3.36E+17 2.04E+17 4.297E+17 357.8 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -59.13E, -61.92N). ====================================================================================== plate # 45 =SO: 441 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -5.94E+24 -1.07E+26 -4.95E+25 1.178E+26 -93.19 -24.83 Velocity-Boundary-C.'s 3.55E+12 -2.69E+12 -6.42E+12 7.814E+12 -37.20 -55.23 ------------------------------------------------------------------------------------- Basal-Strength: -5.94E+24 -1.07E+26 -4.95E+25 1.178E+26 -93.19 -24.83 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.32E+24 1.85E+25 -5.23E+25 5.556E+25 79.82 -70.22 Continuum-Link [PLUG]: 2.86E+25 6.53E+25 8.05E+25 1.076E+26 66.33 48.47 ------------------------------------------------------------------------------------- Side-Strength: 3.20E+25 8.38E+25 2.83E+25 9.407E+25 69.13 17.48 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -2.60E+25 2.29E+25 2.12E+25 4.063E+25 138.65 31.45 Side-Strength: 3.20E+25 8.38E+25 2.83E+25 9.407E+25 69.13 17.48 Basal-Strength: -5.94E+24 -1.07E+26 -4.95E+25 1.178E+26 -93.19 -24.83 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.32E+06 -5.78E+06 1.03E+06 7.295E+06 -126.78 8.13 Suggested viewpoint for orthographic projection of torques on this plate is: ( 128.66E,-58.16N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -4.42E+18 -4.57E+18 -4.98E+17 6.377E+18 98.5 Side-strength: -1.30E+19 2.80E+18 6.40E+18 1.477E+19 34.7 Basal-strength: 1.74E+19 1.77E+18 -5.91E+18 1.849E+19 232.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 48.22E, -14.19N). ====================================================================================== plate # 46 =SS: 9 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 0.00E+00 0.00E+00 0.00E+00 0.000E+00 0.00 0.00 Velocity-Boundary-C.'s 1.57E+24 3.19E+22 -8.75E+24 8.885E+24 1.17 -79.84 ------------------------------------------------------------------------------------- Basal-Strength: 1.57E+24 3.19E+22 -8.75E+24 8.885E+24 1.17 -79.84 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -5.04E+24 -6.75E+24 8.52E+24 1.198E+25 -126.74 45.32 Continuum-Link [PLUG]: 3.22E+09 5.37E+09 -4.29E+09 7.593E+09 59.04 -34.45 ------------------------------------------------------------------------------------- Side-Strength: -5.04E+24 -6.75E+24 8.52E+24 1.198E+25 -126.74 45.32 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 3.47E+24 6.72E+24 2.28E+23 7.566E+24 62.68 1.73 Side-Strength: -5.04E+24 -6.75E+24 8.52E+24 1.198E+25 -126.74 45.32 Basal-Strength: 1.57E+24 3.19E+22 -8.75E+24 8.885E+24 1.17 -79.84 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.83E+08 -1.98E+08 4.45E+07 4.331E+08 -27.35 5.90 Suggested viewpoint for orthographic projection of torques on this plate is: ( 152.41E, -8.93N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.80E+17 5.33E+16 1.17E+18 1.188E+18 1.7 Side-strength: -4.47E+17 -1.29E+18 -1.29E+18 1.880E+18 134.0 Basal-strength: 6.27E+17 1.24E+18 1.17E+17 1.395E+18 274.9 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 152.11E, -7.29N). ====================================================================================== plate # 47 =SU: 599 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 7.16E+25 8.16E+24 9.96E+25 1.229E+26 6.50 54.11 Velocity-Boundary-C.'s -2.06E+24 -3.99E+23 -6.96E+24 7.270E+24 -169.06 -73.19 ------------------------------------------------------------------------------------- Basal-Strength: 6.95E+25 7.76E+24 9.26E+25 1.161E+26 6.36 52.93 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 5.76E+25 3.16E+25 -5.90E+25 8.833E+25 28.76 -41.94 Continuum-Link [PLUG]: -8.85E+25 -2.21E+25 -3.26E+25 9.689E+25 -165.96 -19.67 ------------------------------------------------------------------------------------- Side-Strength: -3.09E+25 9.47E+24 -9.17E+25 9.719E+25 162.96 -70.57 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.86E+25 -1.72E+25 -9.80E+23 4.232E+25 -155.97 -1.33 Side-Strength: -3.09E+25 9.47E+24 -9.17E+25 9.719E+25 162.96 -70.57 Basal-Strength: 6.95E+25 7.76E+24 9.26E+25 1.161E+26 6.36 52.93 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 3.15E+06 -4.62E+06 1.30E+06 5.739E+06 -55.74 13.07 Suggested viewpoint for orthographic projection of torques on this plate is: ( 114.34E, 13.12N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -4.77E+17 1.44E+18 -6.47E+18 6.642E+18 181.4 Side-strength: 1.31E+19 6.88E+18 -3.71E+18 1.525E+19 255.5 Basal-strength: -1.26E+19 -8.31E+18 1.02E+19 1.822E+19 55.0 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 119.63E, 8.40N). ====================================================================================== plate # 48 =SW: 10 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 7.69E+24 3.67E+24 3.26E+24 9.125E+24 25.51 20.91 Velocity-Boundary-C.'s 9.00E+12 3.33E+12 3.17E+12 1.011E+13 20.32 18.27 ------------------------------------------------------------------------------------- Basal-Strength: 7.69E+24 3.67E+24 3.26E+24 9.125E+24 25.51 20.91 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -6.70E+24 1.56E+24 -4.14E+24 8.029E+24 166.85 -31.07 Continuum-Link [PLUG]: 3.22E+09 5.37E+08 0.00E+00 3.266E+09 9.46 0.00 ------------------------------------------------------------------------------------- Side-Strength: -6.70E+24 1.56E+24 -4.14E+24 8.029E+24 166.85 -31.07 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -9.96E+23 -5.24E+24 8.88E+23 5.403E+24 -100.77 9.46 Side-Strength: -6.70E+24 1.56E+24 -4.14E+24 8.029E+24 166.85 -31.07 Basal-Strength: 7.69E+24 3.67E+24 3.26E+24 9.125E+24 25.51 20.91 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -1.17E+06 7.27E+06 1.69E+07 1.844E+07 99.12 66.46 Suggested viewpoint for orthographic projection of torques on this plate is: ( -26.38E,-58.24N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 7.31E+17 -6.72E+16 4.24E+17 8.481E+17 18.2 Side-strength: -3.61E+17 -1.20E+18 1.30E+17 1.260E+18 281.3 Basal-strength: -3.70E+17 1.27E+18 -5.54E+17 1.432E+18 137.3 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( -27.46E, -57.82N). ====================================================================================== plate # 49 =TI: 19 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 9.62E+24 4.11E+24 -1.50E+25 1.828E+25 23.10 -55.08 Velocity-Boundary-C.'s 9.63E+12 6.45E+12 3.61E+12 1.214E+13 33.81 17.31 ------------------------------------------------------------------------------------- Basal-Strength: 9.62E+24 4.11E+24 -1.50E+25 1.828E+25 23.10 -55.08 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.00E+25 -4.44E+24 1.43E+25 1.800E+25 -156.08 52.55 Continuum-Link [PLUG]: 8.59E+09 4.83E+09 4.29E+09 1.075E+10 29.36 23.55 ------------------------------------------------------------------------------------- Side-Strength: -1.00E+25 -4.44E+24 1.43E+25 1.800E+25 -156.08 52.55 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 3.81E+23 3.32E+23 7.00E+23 8.636E+23 41.04 54.21 Side-Strength: -1.00E+25 -4.44E+24 1.43E+25 1.800E+25 -156.08 52.55 Basal-Strength: 9.62E+24 4.11E+24 -1.50E+25 1.828E+25 23.10 -55.08 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 5.91E+06 -5.36E+05 -6.12E+06 8.521E+06 -5.18 -45.87 Suggested viewpoint for orthographic projection of torques on this plate is: ( 122.21E, -6.31N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -9.82E+16 -5.17E+16 7.79E+16 1.355E+17 54.7 Side-strength: -1.81E+18 -1.36E+18 -1.69E+18 2.825E+18 127.0 Basal-strength: 1.91E+18 1.41E+18 1.61E+18 2.869E+18 304.4 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 125.91E, -8.81N). ====================================================================================== plate # 50 =TO: 18 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -2.12E+23 1.65E+24 1.59E+24 2.304E+24 97.33 43.75 Velocity-Boundary-C.'s -2.68E+13 1.70E+14 3.20E+13 1.751E+14 98.95 10.52 ------------------------------------------------------------------------------------- Basal-Strength: -2.12E+23 1.65E+24 1.59E+24 2.304E+24 97.33 43.75 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 3.40E+24 3.14E+24 -1.11E+25 1.201E+25 42.79 -67.33 Continuum-Link [PLUG]: 0.00E+00 5.37E+08 0.00E+00 5.369E+08 90.00 0.00 ------------------------------------------------------------------------------------- Side-Strength: 3.40E+24 3.14E+24 -1.11E+25 1.201E+25 42.79 -67.33 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.19E+24 -4.80E+24 9.49E+24 1.110E+25 -123.59 58.75 Side-Strength: 3.40E+24 3.14E+24 -1.11E+25 1.201E+25 42.79 -67.33 Basal-Strength: -2.12E+23 1.65E+24 1.59E+24 2.304E+24 97.33 43.75 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: 1.20E+08 1.27E+07 4.39E+07 1.284E+08 6.02 19.97 Suggested viewpoint for orthographic projection of torques on this plate is: ( 172.52E,-14.95N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: 6.80E+15 -1.56E+18 -7.84E+17 1.742E+18 117.8 Side-strength: 9.15E+16 1.80E+18 5.40E+17 1.885E+18 287.2 Basal-strength: -9.83E+16 -2.48E+17 2.44E+17 3.617E+17 45.7 and this cluster of forces should be connected by a leader line to the plate center at approximately: (-174.51E, -19.32N). ====================================================================================== plate # 51 =WL: 22 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: 3.31E+24 4.40E+24 -1.48E+25 1.580E+25 53.08 -69.60 Velocity-Boundary-C.'s 4.57E+23 1.54E+22 -2.25E+24 2.291E+24 1.93 -78.50 ------------------------------------------------------------------------------------- Basal-Strength: 3.77E+24 4.42E+24 -1.71E+25 1.802E+25 49.56 -71.20 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: -1.00E+25 -1.54E+25 7.93E+24 2.003E+25 -122.99 23.31 Continuum-Link [PLUG]: 4.29E+09 4.29E+09 -1.29E+10 1.424E+10 45.00 -64.76 ------------------------------------------------------------------------------------- Side-Strength: -1.00E+25 -1.54E+25 7.93E+24 2.003E+25 -122.99 23.31 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: 6.25E+24 1.10E+25 9.13E+24 1.561E+25 60.42 35.80 Side-Strength: -1.00E+25 -1.54E+25 7.93E+24 2.003E+25 -122.99 23.31 Basal-Strength: 3.77E+24 4.42E+24 -1.71E+25 1.802E+25 49.56 -71.20 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -4.13E+07 2.96E+07 -1.20E+07 5.222E+07 144.41 -13.26 Suggested viewpoint for orthographic projection of torques on this plate is: ( 148.29E, -2.96N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -8.41E+17 -1.17E+18 1.98E+18 2.450E+18 35.9 Side-strength: -5.28E+17 -1.14E+18 -2.88E+18 3.144E+18 156.7 Basal-strength: 1.37E+18 2.30E+18 9.00E+17 2.828E+18 288.6 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 147.26E, -6.57N). ====================================================================================== plate # 52 =YA: 56 nodes. Torques on plate bottoms: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Mantle-Drag: -9.23E+25 -2.71E+25 -3.47E+25 1.022E+26 -163.60 -19.83 Velocity-Boundary-C.'s -1.16E+13 -4.42E+12 -5.35E+11 1.245E+13 -159.19 -2.46 ------------------------------------------------------------------------------------- Basal-Strength: -9.23E+25 -2.71E+25 -3.47E+25 1.022E+26 -163.60 -19.83 Torques on plate sides: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Fault-Strength: 2.43E+24 2.28E+24 -1.25E+24 3.563E+24 43.16 -20.49 Continuum-Link [PLUG]: 9.34E+25 3.13E+25 2.92E+25 1.028E+26 18.54 16.48 ------------------------------------------------------------------------------------- Side-Strength: 9.59E+25 3.36E+25 2.79E+25 1.054E+26 19.32 15.36 Kind of torque: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Lithostatic-Pressure: -3.61E+24 -6.46E+24 6.77E+24 1.003E+25 -119.18 42.44 Side-Strength: 9.59E+25 3.36E+25 2.79E+25 1.054E+26 19.32 15.36 Basal-Strength: -9.23E+25 -2.71E+25 -3.47E+25 1.022E+26 -163.60 -19.83 Traction pole vector: X=0N,0E Y=0N,90E Z=90N Magnitude Longitude Latitude ------------------------- --------- --------- --------- --------- --------- --------- Basal-strength: -5.90E+06 -6.59E+06 -5.49E+06 1.040E+07 -131.84 -31.82 Suggested viewpoint for orthographic projection of torques on this plate is: ( 118.55E, 30.28N) from which direction all 3 torque vectors will be in the plane of the figure. Equivalent horizontal forces at this point: Kind of force: X=0N,0E Y=0N,90E Z=90N Magnitude Azimuth ------------------------- --------- --------- --------- --------- --------- Lithostatic pressure: -1.32E+18 -1.53E+17 -8.49E+17 1.575E+18 128.6 Side-strength: -6.64E+17 -9.40E+18 1.36E+19 1.654E+19 17.9 Basal-strength: 1.98E+18 9.55E+18 -1.27E+19 1.605E+19 203.1 and this cluster of forces should be connected by a leader line to the plate center at approximately: ( 116.71E, 28.30N). ======================================================================================